UL Listed Advanced Tilt TV Wall Mount for Most 42-90 Inch TVs, TV Bracket with Full Tilt Extension up to 7", Fits 16", 18", 24" Studs, Max VESA 600x400mm and 120LBS MD2104

This mount is fantastic. We needed something to cover our weird stud set up and the middle of the living room wall is where the center stud is and they're spaced 16" apart. Rather than try to have a mount that needed to horizontally offset that far we wanted a mount with a base that could cover the 32" and attach at all 3 studs. It came with a mounting template and all the hardware needed to set up. It was fairly easy to put together and once we had the man power to lift the tv up onto the mount, the brackets hooked on easy This mount is perfect and covers everything we need, 600x400 VESA pattern, holds the 100lb, 86" LG TV, and even nice that it can extend out 7" and tilt. It feels very secure on the wall with the 3 studs, not too hard to do the adjustments, but with a tv this size, always recommended having at least 2 people to hold on to the TV. Best of all this mount was affordable and cheaper than the mount that could only cover 16-24" studs.

Built like a tank, solved the problem for the larger TV and beam spacing in my living room. Easy to install with supplied hardware. Easy to use and seems very solid.

This was an easy install and no issues with it supporting a 65" tv and soundbar. We don't move it so I can't comment on the range of motion of the unit. Seems to be of good quality materials and assembly/design.

Solid gear. Easy to install. I added a soundbar mount to it. I needed something to cover 32" to help center my tv in the bedroom and this fit the bill. This is my second mounting dream tv mount. The mount comes out far enough to get behind the tv to level it out. I wish it came out a little further but that's my preference. Everything you need is included and you'll have extra hardware. They do not skimp on that.

Good product. Easy install. Directions could be a little better but luckily I'm a handy guy. Bought this product because I had a skipped stud over my fire place so I needed a 32" wide bracket to shoot the gap. Don't trust the template to drill all four holes. What you should do is get the top two holes drilled with the template, making them as level as possible, then attach the bracket to the wall with the two holes you just made, then finally use the metal frame to guide the last two holes and avoid the headache that I had. I drilled all four holes using the template and two of them were just enough outside the open area that I had to use a round file to take some meat out of the frame so I could get the other two screws into my drilled holes. Luckily the frame is very beefy so removing this material wasn't concerning. Docking one star becuase this is what the instructions should really tell you to do.

Easy installation, solid wall mount. Would definitely buy again

This TV wall mount works very well ...... You will be better off to use deck screws with washers the size of a dime to mount this TV wall mount to a dry wall wall with 2X4 studs ........ This TV wall mount has plenty of adjustment ...... posted by Jent

I had a challenge - how to mount a 86 lbs 75” tv on uneven covered with sone veneer fireplace wall. Ordered and tried a lot of different mounts and finally found one that works. It even comes with different sizes of plastic spacers. I drilled 8 holes in between stones and used a combination of tapcon screws and plastic inserts for regular screws. Tapcons are supposed to be able to be screwed into mortar/concrete with no plastic tensioners, but I tried and it wasnt strong enough. The plus of this mount is rigidity - it is made of two parts as many of competitors, but these two parts are metal welded rectangles that assembled side by side. Most others I tried come as two strips for bottom and top and those were simply not on the same level as stones are of different thickness. I tried to level mount on stones but there was still about 2° miss. Luckily this mount has ability to price level by 2-3° and it worked like a charm. I also can pull TV about 10-12 inches from the wall - which is critical to attach cables to it and be able to take it from the wall by pulling release ropes. It would have been difficult otherwise and access from the bottom is blocked by the shelf. All in all I am very happy!

muy facil de instalar, al igual que colocar la pantalla en el soporte

I needed a new mount for my TV because I realized I rarely use the full‑motion range of my old bracket. Instead, I wanted something sturdier that still let me extend the TV just enough to access the rear connections when swapping equipment. This is my third mount from Mounting Dream, and once again, it delivered exactly what I needed. Installation was straightforward, as usual, and the instructions were clear. I tested the tilt feature briefly and really like the new tool‑free adjustment handles—a big improvement over my previous mount that required an Allen key. The build quality feels solid and secure; the wall plate easily passed my usual “integrity test” (a firm pull to check sturdiness). My 55” TV mounted perfectly with the included M6 screws and spacers. Overall, I’m very satisfied and would definitely recommend this mount.

Lo resistente que es.

Sturdy, and well built Adjustable depending on where your studs are within the wall everything needed is included flush to wall (2inch clearance)

Es excelente