Bosch T-Shank Jig Saw Blade Set T503, 3 Pieces, 3-1/4'', 14-20 TPI, For Laminate Flooring And Hardwood

These are great blades and my first go-to for any plywoods, coated melamine and other thin laminates or veneer plywoods. They most often leave a much cleaner cut in thin materials (1/4" and thinner) than the downcut/reverse tooth blades do because of the tooth design here. They're bimetal blades, not plain high carbon steel, so the high speed steel teeth start out sharper and tend to stay that way longer if you aren't totally abusing the saw. These have been my favorites for over 30 years now back when I bought the same cut under the Porter Cable label, and the current Diablo are also the same thing. They are fleam ground to provide kerf relief and the teeth have the same point/grind style that you see in good hand saws. Really works a treat to cut baltic/finnish birch plywoods with zero to minimal splintering top or bottom, and sails through cheap veneer appearance plywoods. Works on regular lumber and MDF of course but better to choose different blades there, imho. They also work great in many plastics and composites although heat buildup is an issue (kerf welding) and phenolics or glass composites will wear them out quickly (they're not very good for lexan/plexiglass...nice cut but the kerf welding can't be avoided with this blade design...great for poly and ABS, delrin, etc). The scroll blade is great and the wider "laminate" blade is better for straight cuts (it's also just slightly thicker for resistance to wander/flex, but not as thick as fast cut wood construction blades). I think the same factory in Switzerland must make these for everyone (Bosch, Diablo, old Lenox, Porter Cable, Festool, etc). They appear to be the same high quality as they always have been. If you want only the scroll blade in bimetal it looks like you'll have to find that under the Diablo label in a 5-pack. The wider laminate blades in this pack are nice to have and it's a cheap price for the pack.

These T shanks were very helpful in helping me do my flooring. They are excellent for laminate flooring. They come with much more teeth per inch to get a really clean cut. For the price you can get plenty out of them. I did about 600 sq feet with my jigsaw and these blades. Given, the process could have gone faster with a saw but if you are a DIYer, it will save you money for sure and make it much easier to maneuver. You go through the blades somewhat quickly but they are thin and don't seem to be meant to last a lifetime. Also be sure to have a stable workbench with clamps to make sure your floor planks don't slide too much. Get yourself a few packs of these and you'll be good for more than a few projects.

Brought these to cut out a kitchen sink in a new laminate countertop. Worked great. The cut was clean and smooth with no chips at all. Also used masking tape to help keep a clean cut. One blade was all we needed. Great value and product. Highly recommend!

These work great for cutting through laminate MDF, with almost no chipping! The are too short to cut through laminate countertop though.

These blades are worth the additional cost versus the less expensive ones. They're stronger, sharper and much more durable. Pull the trigger on these; you won't be disappointed in your purchase.

Super high performing in bathroom remodel. Wouldn’t hesitate to order more in the future.

Cuts laminate and lvp very well. Dulls kinda fast with lvp, but gives clean cuts

Great little blades for the price

Ideal item for use in cutting vinyl floor planks properly with nice clean cuts. Tough blades, excellent quality, the best we tried, makes the job easier.

They cut laminate flooring planks without any chipping.... lasted the whole project.

It cuts laminate flooring like hot knife on butter.

Worked as it should

Great blades for vinyl plank flooring