CT-2000.1D

Hi quality amp I started with it powering a JL audio 10w3 then upgraded to 2 JL Audio 12W7's at 1 ohm it bangs all day never gets hot but you absolutely need to run at least 2 gage (or larger) wires from the battery and not that copper clad aluminum junk if you install it right this amp will be great only slightly complaint is that the base knob kinda feels cheap and the light on it is way to dam bright it will light up the whole car if mounted on the dash so point it to the floor and your ally good I sharpied over mine still shows through but is much dimmer

It’s a good amp, hit hard for my two 10” kicker comp r and didn’t get hot but after installing my Rockville punisher 10D2 i definitely see it getting hot a little more so I’ll have to watch for it but it hits hard in my car for sure I love it

I've had this thing for a year now and it's still going strong. It runs super cool, which is awesome. No problems so far, knock on wood. Definitely recommend it to anyone looking for something similar. Glad I bought it.

Best amp i owned

Starting off it was a pretty good amp. I was using it to push 2 12's that were about 2400watts max. Then one day I'm playing it, not loud, and next thing I know I'm smelling smoke and I don't hear any bass. Setup has been the same since I've had the amp so nothing was changed. I replaced it with another amp and everything is working fine. I don't have any info for warranty or repair. I'd suggest a more reliable brand. UPDATE: 11/13 Pic uploaded. 100% manufacturing error. Why would they put a wire on a heatsink? Oh and by the time I realized my warranty was in my Amazon account (my 1st bad electronics purchase) they denied it, just to give you an idea of the customer service.

Plenty of power to power my scar audio 900 RMS 12s x2 rated it 2000 RMS watts I give myself a little bit of room more power in the amp so I could always turn it down but it’s plenty of base. I haven’t installed in my xterra plenty loud

I'm not a car audio genius but I have owned several systems that I have installed, and you eventually get a feeling for the correct setup combo. I was running 2 shallow 10s , so your limited on your power, this amp is likely over powered for 2 10s with a RMS of 300 each. I cooked two cheapy 10s, they sounded amazing for a few weeks listening to some NOFX, a perfect circle and tool.. and they I got that burnt plastic smell, I knew the subs were done. That was wired to 2 ohms at the amp lol. I then wired to 4 ohms at the amp with a new set of shallow 10, again the RMS was 350 per sub, so wiring 4 ohm I didn't wanna cook my new items which were name brand 200$ subs. Overall this amp is nice, works great, and doesn't get too hot.. but.. I dialed it all in, sounded great, and then I plugged in the base knob, which seemed to mess everything up. Eventually the base knob cord, anytime I touched it, the subs would thump and hum. I litterally unplugged the knob and threw it away and here we are 6 months later the sub works great. Also, this was in a 2018 f250 with a factory Sony system which I bypassed using a pac unit, you can't delete the factory sub in this particular vehicles because it powers more then you realize. Also used the factory nav unit still which comes with its own audio settings to mess with. As vehicles get newer and newer this car audio stuff gets harder amd more expensive. The amp, being 250, 400 in subs, 150$ box, 199$ pac unit, and prob 100$ in wiring, its easy to not wanna burn up equipment not knowing the correct way to wire things. My advice, great amp, but use Google, get diagrams, don't wire double or triple your subs RMS, your just asking for a problem.

I'm using it to push two 15-in MTX subwoofers in my Jeep it sounds great. At first I was worried because there was no cooling fan but I run it constantly just under clipping and it rarely even gets warm to the touch

Sounds amazing.

The CT mono block 2000 watt amp is a fantastic amp with lots of power to run my two 12" American Bass competition subs plus my 10" massive 3000 watt competition sub and after 6 months this CT-2000.1D monoblock amplifer is still going strong, and I play my music loud with lots of bass. All I can say, it's a great amp for the money.

I have it powering a deaf bonce apocalypse db-3015r 15" d2 in a ported box in a jeep wrangler jku and it pushes the 2800w rms subwoofer with no issues at all.Watched Steve Mead dyno the amp on yt before i bought it and it blew all the ratings out the window. Highly recommend