055 The 55

This is a great knife and concept, a 110 shrunk down to an adorable yet useful pocket knife size. The thing just exudes quality and class, feels good in the hand, has zero blade play, and it came scary sharp (bald patch on my forearm to prove it!) with a needle-pointy tip as well. I thought about getting a 500 series, but I prefer the clip point over the drop point for its fine detail and piercing ability (it looks cooler, too), and also the brass bolsters over the nickel silver bolsters because I like how the brass patinas. It's easier to just grab the blade with your thumb and forefinger than to use the actual nail nick. It's refreshing to use an old-school lockback after having fiddled with a liner lock knife before. You would think the handle would be too small to be comfortable but it's not really. I have pretty big hands and I can still get good leverage on it. The brass and wood composite are so nice to hold that I tend to turn it over in my hand while thinking about something. The blade steel is 420HC, as most of Buck's knives are. It may not be the latest gee-whiz supersteel, but I'll tell you what, it's an honest working steel that's proved its worth from decades of hard use on 110s. During my research, reviewers on Youtube have stated that this particular Bos heat-treated 420HC is at least on-par with 440C and AUS-8. I repair and build computers, so I used it recently to open packages of new gear and cut cable management zip ties (another plus of the clip point, the end of the blade is thinner so it can fit inside the zip tie better). I'm also finding myself pulling it out for miscellaneous uses that I didn't think of before I carried a knife, such as cutting a loose thread instead of pulling on it. It hasn't dulled yet after a week of sporadic use, but I got a ceramic sharpener for when it does. Overall I couldn't be happier and I expect it to serve me well for years to come. Note: I saw some people saying the lockbar is raised slightly on the back end while in the closed position, this is normal. They grind the lockbar flush in the open position so you have a smooth surface while using it. If they ground it flush closed then the opposite would be true. I heard their custom knives don't do this, though.

You can't go wrong with a Buck Knife, and the Model 55 is no exception. The Model 55 is about one-half the size of the legendary Buck Model 110 folding hunter. The advantage of the Model 55 is that it easily carries in a pocket as opposed to needing a sheath like with the Model 110. The steel in the Model 55 has been optimized by Buck and provides a great balance of wear, edge retention, and ability to sharpen the knife. In summary, the Buck Model 55 is a winner and a great daily carry for those days when a Model 110 is just too much to carry.

After having just purchased the 50th Anniversary edition of the Buck 11o folding hunting knife, I had to have this smaller version of that knife for everyday carry. Let me start by saying I am not a knife collector, I don't keep knives in a box, but I do purchase a lot of knives. To me, every true red blooded American should own this knife, or any man for that matter. This knife is the little brother of an American classic and it is every bit as functional and beautiful as the Buck 110, both of which are made in America! After holding the Buck 110 in my hands and seeing how beautiful the craftsmanship was, I wanted more. I wanted a knife like that that was small enough for me to carry with me everywhere. Enter the Buck 55. This knife is almost an exact miniature version of the 110. The Knife I received was shaving sharp right out of the box, literally (I have the bald spot on the back of my hand to prove it). There was absolutely zero side to side blade wiggle (a good test of any quality knife), and the blade is gorgeous. This knife is made out of the same 440HC steel used on the Buck 110. This is a special 440 High Carbon steel I believe only used by Buck and it is very well known for holding an edge exceptionally well. Carry... I like to have a knife on me at all times, and I had been wanting to get a new EDC carry knife for quite some time. I don't think I'll be saying those words ever again for the rest of my knife. This knife will be in my pocket until the day I die, and even then I am sure it will still be in excellent working condition and be handed down to my daughter. The Buck 55 fits perfectly in the 5th pocket in a pair of jeans which is really nice. My previous EDC knife was a CRKT Kasper (CRKT makes some great knives at great reasonable prices) and I had carried that knife for over 5 years. I work in an office environment and don't like having a large knife sticking out of my pocket but always want a good knife on me at all times. This knife is perfect if that sounds similar to you. It's unassuming so as fine to use in an office but 100% up to serious cutting tasks. If not abused, this is a knife that lasts a lifetime and will look good doing it. If you are on the fence about this knife, I highly recommend buying it now. It is worth every penny and you will not be disappointed. You can't beat Bucks 4Ever warranty either. I am nostalgic man and already think about how cool it is that this knife will get handed down to my family when I am no longer around, as I know this knife will surely outlast me.

I bought this based off of the description saying it would be the 2020 model, which comes in ebony as opposed to the older walnut. What I got was the older model in walnut. It wasn't what I ordered and expected, so I returned it and found the correct 2020 ebony locally. I don't think this is a matter of deception but that the description here has been updated for 2020 while e-tailers are still selling through older stock. Both have a stamp showing a 2019 manufacture date, but one was for the 2019 line, the other for 2020. They need to create a new listing for the older ones in walnut. I'll upload pictures of both for reference, the difference is clear. Otherwise this is a BRILLIANT little knife. Perfect size for your change pocket. Light, but a nice feel in hand for something this size. Sharp as I would ever expect from a knife of this nature to come. It isn't finely polished but looks nice. If I were to nitpick, I would say that compared to my old 110, the blade grind isn't as fine and that stands out. It doesn't appear to affect the function of the blade edge, so it's fine. The flat of the blade isn't very polished, in fact, looks fairly "pocket worn" like it's been carried a while. It actually looks good, I'm not complaining. There are NO gaps anywhere to be seen, the blade is centered, the brass to wood joining is absolutely smooth, no blade wiggle...this is a very tight knife. I'm impressed. The spring is maybe a little soft, but opening ends in a very satisfying snap into locked position. I'd compare it to my SOG Blink in low profile width/weight, even if that's where similarities end. This is a better size and I prefer a clip style blade as well as classic look. Many newer style knives have blades that are just too large for their general daily purpose and seem disproportionate. We're not splitting logs here. The 55 is classic metal and wood, the way a knife should be and the right size. I really like this knife. I give the 55 5 stars in everything except value for money, just to make a point. In a world where you can easily find the venerable 110 for $45, the knife this one claims to be half of, it makes no sense to pay MORE for this. At this price it should have a blade in 5160 carbon steel or the S30V some Bucks have now. That said, I'm very happy with this knife. It would be nice for the 301 stockman to get treated as well as the 55, to get better springs and the ebony, so I have a reason to rebuy that one.

Don't let it fool you though. It is insanely sharp. I cut my finger and didn't even realize when I was showing the knife to my wife until I started seeing blood splotches on it and my hands. But yeah, a great little pocket knife for lighter duty and precision tasks with an exquisite design, materials, and craftsmanship. Update: The cut healed after 1 day and was so clean and sharp that I can't even tell where it was at all - and yeah, I don't have a problem with my nerves nor eyesight or anything. But enough about that... Thanks.

You might wonder why this thing is priced like it’s big bros. I wondered myself, it almost seemed impossible that this knife would be half the size of the 110, but it really is. The biggest difference is that from 110 to 112 the knife gets shorter but stays thick. The 112 is a heavy knife for its size. The 55 is thinner, much thinner. All that being said it’s also the only small knife I’ve found that feels as solid as a big knife. This thing is nice, I noticed right away that the bolsters were superior to my Texas toothpick from buck. It’s like when you get to that $60 price point they use much better materials. It’s a great knife if you simply do not want to carry around a 110 or 112. The 55 is definitely small enough to fit into the small pocket in your jeans. It’s useful and not at all intimidating. This is your “box hunting” knife, your fruit ninja knife.

Love this little knife. Stays sharp and easy to carry in front pocket of my jeans. Very handy to have

Overview: I'm a big fan of buck knives and what they stand by, and this little knife is definitely no exception. It holds an edge, it's easy to sharpen, and greatest of all, it is the perfect size for doing most anything on the smaller scale. It might even be big enough to clean a small trout if you're an accomplished angler. Already owning the venerable Buck 110, I knew I needed a smaller version of it--which the 55 is exactly that. However, as with any product, there are pros and cons I discovered. What I liked about this knife: 1. 420HC is generally considered a lower-end/softer blade steel, but with Buck's tempering process, it becomes hard to beat, no pun intended. Put simply, Buck's 420 is the best 420 there is. It holds an edge just fine. It might not cut down trees without getting dulled, but that's what chainsaws are for. I've never had problems with rust or corrosion on this steel, which is a huge bonus too many people don't consider. 2. The locking mechanism feels very strong and smooth--a big factor when considering both personal safety and reliability in a folder. Once you see how it works, you'll realize its beefier than most designs. 3. The blade had little to no play in it upon opening the box, which is a sign of better construction. 4. The polishing on the brass was excellent--not a scratch. 5. The size, as before mentioned. It is a Swiss Army Knife without the excessive and unnecessary bits and bobs you never use. It is perfect for doing most anything, unless you're skinning a bear or something like that. What needs improvement: 1. I personally felt like the wood in the handles was a little bit lower-end, which is why I didn't feel entirely honest about giving the knife five stars. It just had that cheaper feeling typical in a knife manufactured overseas, though that description might be overdoing it a bit. It was just 'good', not the 'great' I've seen in Buck's other knives, to put it best. 2. The fit and finish was excellent as far as functionality is concerned, but there were edges that just had that sharp, unfinished, unrounded feeling. To add to that, there was a considerable amount of factory dirt on the knife out of the box. After oiling and cleaning the mechanism and blade, however, it came right off. Overall I still consider it a great knife, even though it might have a few quirks that keep it from a full rating.