Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)

Great set has popped off ball joints from the mount numerous times. Today I even used the big one to press out the ball joint to replace it . Be warned one of the tools has a sharp point to keep the tool from popping off but some bolts are flat and don’t have the dimple to accommodate the point so it digs a hole and in my case deformed the ball joint bolt so it couldn’t be used.

So much stronger than the tools I broke. Haha. They are very heavy duty and got the job done, let me tell you. I beat the heck out of them replacing my steering box and there is no damage and made the process a breeze.

Great tool set for my 2002 F250. Only had to use 1 of the 5 tools for the steering ball joints and the Pitman Arm joint. I probably saved hundreds of dollars versus taking it to a shop. Alway keep the nut on but loose when you POP the joints. Amazing how tight the taper fit is. Was able to POP all 4 joints. Quality kit in a nice case.

Nice cheap Chinese tools. They did the job and I added them to my arsenal. Fit and finish is what you’d expect from drop ship tools made in china. However, there was zero issues popping the ball joints on my 2020 Ram 1500. The attachments were on the small side. If you have a large vehicle, you’ll likely need to use the adjustable puller. Was a bit sketchy lol. Looking to save yourself a few hundred instead of taking your car to the shop? Then these are a solid buy. I don’t know if I’d buy these for professional use though.

This tool is good quality. We removed lower control arm ball joint with ease. Easy to use, very straightforward. The tool did the job for us. Would highly recommend.

Works well, make the bolt tight an a wack to give the part a shock load to pop off, worked great in places where a hammer )or fear of damage) doesn't fit

Great price and quality. Works great

Tool works - but WARRANTY is bs. I purchased this in November 2022; and have had mostly no issues - appreciated the tool and quality. However - recently working on my 92 Truck - and the Tie Rod End Puller became Damaged - removing a very tight Tie Rod. Rotating pin got bent; ball bearing popped out and lost... So, now very hard to use. The Pitman Arm puller got DESTROYED (by HAND - NO impact tools or wrench) trying to get a Pitman Arm off the gearbox. So, I'm thinking these all have LifeTime warranties - look into it - find out only 1 year. Manual lists replacement parts - but searching the web and the Orion Motor Tech website - no replacement parts. The Pitman arm puller needs a new forcing screw - even though I used large quantities of lube grease; and the body of that tool - needs the threads repaired. Thread repair "kits" are not cheap. So very disappointed. I did a bit more research and found out Pitman Arms can be EXTREMELY difficult to remove; but Tiger makes a heavy duty unit which removed the Pitman Arm in about 10 seconds. Meantime - I now have two tools in a front end service kit which are USELESS. So I am about to make the same purchase (again) - in one of the more expensive brands - with an actual LIFETIME warranty.

السعر مبالغ فيه جدا

Used on front suspension of VW Touareg. Better than expected and removed the ball joints without any risk of damage to the rubber boots

I used the Ball Joint Separator and Puller to replace the steering spindle on my SUV, and it worked flawlessly. The tools are solid, well-built, and made the job much easier than I expected. The different attachments fit perfectly, and the leverage on the pullers is excellent. Saved me a lot of time and frustration. Highly recommend this set for anyone doing suspension or steering work at home.

Las herramientas se ven de gran material y de buena durabilidad, de momento gran producto

Bonne rapport qualité