for OnePlus 6T Housing Rear Back Glass Door Cover Replacement for OnePlus 6T A6010 A6013 LTE 6.41" (Mirror Black)

Hat super funktioniert

First of all, as mentioned in the description, no instructions are included. However, I just googled OnePlus 6T Back Cover Replacement and watched a few videos I got a little nervous heating up my $550 smartphone to loosen the glue that held the broken back to the chassis. Mine had dropped twice, once on coarse gravel which left a fairly deep crushed spot near the camera which spread out over the back and crossed the other cracks from a previous corner crash. I used a hair dryer on high and tried and tried for maybe 30 minutes to get a corner to lift. I didn't want to overheat it so I was really over-cautious. Finally, I was able to get my thumbnail (the tools were too unweildy) to lift the cover slightly. After reheating and lifting and wedging and repeating, I was finally able to lift it off. Because it had a good backing plate, it didn't break in tiny shards, just a few pieces came loose. After carefully removing all glue remnants from the channel around the perimeter, I peeled the cover off the glue strip around the edge of the new cover and firmly pressed it in place. All was well and it feels like a new phone. Highly recommended.

I ordered a mirror black to replace my broken back panel. Though the material is not the same it feels very much similar. I would strongly suggest buying this. Installation: Not all the tools are high grade to install, few items broke very easily, but it had enough tools to pull the back panel. Rest all is easy. Tip: I had to order a replacement when the first one delivered to me was leaking flash light into the lens of the bottom camera. Make sure you take picture and validate. I figured out that the first one that arrived did not have adhesion near the camera. That causes the light leakage. The replacement fixed it.

I've now purchased and installed this twice since I'm a bit accident prone with my phones. Install is very easy (follow the writeup on ifixit, it worked great!) and it looks OE. The only issue I had with it is that when the OE glass cracked, and mine was heavily spiderwebbed, it held together for 18 months before starting to shed enough pieces to make me look into replacing it, when this glass broke it shattered and large shards of glass were trying to fall off. My guess is that the OE glass has a film on both the front and back sides or much better adhesion to the glass. At the end of the day I would 100% recommend this product, just keep your phone in a case so that if it does break the pieces will be contained.

Easy to install replacement, my back glass had been cracked for a long time, but was inside of a case so I didn't mind. Had to replace my charging port and battery so decided to pick one of these up as well. Obviously missing the IMEI, but overall quality is good for how cheap it is. The pre-applied adhesive is a life-saver, trying to piece together strips of adhesive for repairs is always a headache. The adhesive was in the right places and all you have to do is press into place and give it a few firm passes to work the adhesive in. Great purchase and the back of my phone is in pristine condition again. :)