2+2 Pack Screen Protector Designed for Samsung Galaxy S21 Ultra [Full Protection], 2 PCS Soft TPU Film + 2 PCS Camera Lens Protector, 100% Fingerprint Unlock, Bubble Free - 6.8 inch

This screen protector is a solid choice for keeping your phone protected without affecting usability. The TAURI TPU film is flexible and fits the Samsung Galaxy S22 Ultra well, covering the screen smoothly with good touch sensitivity. It’s easy to apply with minimal bubbles if you follow the instructions, and the clarity remains sharp for everyday use. While it may not feel as rigid as glass, it does a good job at preventing scratches and minor wear. Overall, great value—especially with the 2-pack included.

I am so impressed with this screen protector. If you follow the video instructions it fits perfectly and aligned to the phone. It is very clear and the camera protector is a bonus. Everything you need is in the box. I can't recommend enough

The screen protector itself is nothing special. Its a standard plastic film with a bit of a gel-like coating on the front (which gives it its healing properties). I found my nail marks do indeed disappear after a day but I doubt anything more substantial would heal as well. My main praise though is to do with the installation procedure. I've never installed a screen protector like the way they instruct you to, but I've never been more impressed. The guides are so simple to follow and the final product is a super clean installation with 0 (yes 0) bubbles. When installing the screen protector the dust sticker is your best friend; just before you apply the protector make sure to use the sticker to remove any dust particles to ensure they don't get trapped underneath (Doing this before each step is advisable as dust always seems to land on the screen). I haven't used the camera protectors as I've heard its a hassle to remove them, so for now at least I'll leave them alone. I gave it 4 stars because I'd rather have the option to get 3 screen protectors instead of 2 and ditch the camera protectors. This way it would at least get value points from me. No complaints other than that.

I am absolutely blown away by the TAURI 2+2 Pack Screen Protector for the Samsung Galaxy S21 Ultra! This kit provides the ultimate defense for my device while maintaining pristine clarity that showcases the phone's stunning display. The inclusion of 2 PCS of Soft TPU Film and 2 PCS of Camera Lens Protector ensures that every inch of my phone is shielded from scratches, smudges, and potential damage. The camera lens protectors even go the extra mile to safeguard my precious lenses, allowing me to capture Instagram-worthy shots without any worries. One of the standout features of this screen protector is its 100% Fingerprint Unlock capability. I was skeptical at first, but the unlock experience is seamless and responsive, just like using the phone without a protector. It's like magic - only better! And let's talk about installation - the Bubble-Free technology is a game-changer! Applying the screen protector was an absolute breeze, and I appreciate that I didn't have to deal with any frustrating air bubbles ruining the aesthetics of my phone. In terms of touch sensitivity, the TAURI protector has aced the test. I can confidently say that my interactions with the screen are as smooth as ever, without any lag or loss of responsiveness. All in all, the TAURI 2+2 Pack Screen Protector Designed for Samsung Galaxy S21 Ultra has exceeded my expectations in every way possible. It provides a level of protection that matches the phone's premium quality, ensuring that I can enjoy my device without any nagging fears of damage. If you want to keep your Galaxy S21 Ultra looking brand new while enjoying its incredible features, do yourself a favor and invest in this screen protector. You won't regret it! 📱✨ Your phone deserves the best, and TAURI delivers in spades! ✨📱

Had previously used this product so purchased again because I loved how simple it was to apply and had done a great job protecting my screen. However 1 protector was unusable due to a line down the middle. Used the second one, which is ok but the product feels different. It gets dirty marks on it easily. Not sure I'd purchase again but will do for now.

UPDATED: DO NOT USE THE ELEMENT INCLUDED TO "PROTECT" THE REAR CAMERA ARRAY! I should have read the review of someone who mentioned this before. It screws with your photography, particularly in artificial lighting - creates a polarising effect. I can't take photographs in rooms with ceiling mounted tubes as the light as captured now "rolls". I could not take accurate photos relevant to an unrelated complaint earlier, as the camera could not focus. --- Purchased to replace Samsung's screen protector which did well tbf (had my S21 Ultra since near launch). This looks great, or should. No apparent issues with the read camera lense protector which was easy to apply though. Main part less so - the actual protector layer itself seems difficult to apply compared to the video - note mine did NOT ship with the grey backed fixation stickers etc shown in the video. The alcohol wipe was actually completely dry with only a scent remaining. So I have small air bubbles across the entire top half of my S21 (the removable layer cover backing splits halfway down), and around the edges across the entire front. It appears it slipped during installation too - unlike the Samsung original, this has a cut-out for the front lense, it doesn't cover it. This seems odd as it seems to be of the same thickness. So I now have an edge of the cut out across my front camera, and air bubbles. This pack contains two protectors, and installation of the main went so badly attempted with the first, that I tried again with the second. My fingerprint scanner works and touch sensation seems fine, but the mere presence of air bubbles will incline me to replace this soon, with something from a different manufacturer. They're annoying, can be seen in reflecting light and when displaying light colours, and the card supplied to press them out is only sufficient to remove larger air bubbles.

I looked around a lot before settling on this one, it appears most aftermarket manufacturers are turning away from using tempered glass due to the problems involving the touch sensor. BUT BEWARE, this will RARELY protect you from a direct drop on the screen onto a hard surface, you are still at massive risk if the screen is dropped onto a hard/sharp surface, this protector is more for preventing day to day wear and scratches with a focus on easy replacements, a tempered glass protector is still a better option in that regard. You are better off also combining this with a raised front edge case. Theres not much else to say other than its nice, applies nicely and will do the job protecting the screen, paired with a quality raised front edge case will protect your phone from the nastiest of falls A FEW HELPFUL NOTES TO ANYONE DOING THIS AT HOME: First, watch the installation instructions! Once, and then once again! It took me 3 separate times before I got it right (having to order it twice), mainly my own fault. Whoever was installing it in the video must have been inside a dust free NASA space lab, because after cleaning the screen it will begin to immediately collect dust. ENSURE, your work space is sparkling clean, and use a duster/hairdryer to blast any dust away when you are ready to place the still covered protector on your screen, ONLY then take it out of the bag and do not waft it around, Once before finally pulling the tab upwards to apply one side of the screen protector, lift it up gently and check the underside your screen is clean because magically It still somehow had more dust than before cleaning it. DO NOT pull it all the way to disengage and deform the seal until you are 100% ready, or you're screwed as the screen protector seal with the plastic is broken and will leave a perfect horizontal line of dust, put your finger on the part where it will unseal to give you safety to undust your screen again. Other than that, dont hesitate with the movements, be clean and swift and dont be afraid to use a little pressure with the fabric lines smoother thing!

I will add photos once I put the case back on the phone, but so far I can say it probably can't get better than this when it comes to TPU Film. Surface Feel: I feel like it's not even there. Brilliant Coverage: Precise margins, seem to be just over the actual display area, but plenty of space to the edges for a case(seemingly at least, will see when I put the case back on) Application: Easy, as with most other products of this type, but I suggest you take care how you apply pressure to the film during the process.. Be gentle and uniform since otherwise you might not get the result you want in terms of alignment (previous brands started to slide on the screen after some time and my suspicion is that aside of them being crap, I probably also applied some diagonal force when 'spreading' the protector on my screen) I will keep this comment up to date into the lifespan of this first protector that I applied today 31st October '24. Note: I have had massive issues with other protectors peeling off so I decided to leave the phone out of it's case for at least 24h after application. I will return with photos once the case is back and let you know if I got any peel at the edges. *** UPDATE*** 2 Weeks Later Photos now attached! Protector still holding.. HOWEVER.. It still peeled off a couple of times in the same usual spots.. HOWEVER.. Kudos to the glue, cause it was enough for me to just press it back (without removing the case) and it never peeled of again?!! :0 Sliding.. I have no idea why all the protectors I had on this phone ended up sliding to the right.. If the seller can shed some light on this it'd be great. You can see it slightly offset from the front camera. It was perfectly aligned when I put it on (don't have photo).. Case For anyone with the Sp***n case you see in the photos, I can definitely recommend this protector.

Sí funciona para la huella dactilar pero es delgada la membrana

Very well thought out for ease of install! Super easy to get on. No bubbles! And no issues with a case. Would buy again

Item of no use to me want to return it

Like other reviews state, u do need to watch the video they provide to install it smoothly! With the curves edges of an S22 it can become a bit tricky, my first protector didnt want to detach itself properly from the film resulting in it stretching and being unusable, which honestly might have been my clumsyness. The second one in the package went on smoothIy it does take quit some time to take out most bubbles, and a small hair got stuck but still looking great. contacted Tocol about this (the broken one and the hair) and they immidiatley offered to send a new one. If u have somewhat of a decent case that protect the edges of ur curved screen u might have to push the protector into the edges of the case a bit for it not to come unstuck. Besides that, i have no complaints whatsoever, and my fingerprint scanner works just as great as before.

Meine vorige Folie war die originale von Samsung. Nun nach einem Jahr hat diese jedoch einige Kratzer und sieht nicht mehr gut aus. Daher war es Zeit für eine Neue. Ich war am Anfang etwas skeptisch bei diesem Produkt von TAURI.: - Verkäufer aus China - 10€ für 2 Folien - Eine seltsame Kombination von Schlagwörtern im Name Daher habe ich die 2100 Rating mit ~4.1 Sternen von ReviewMeta überprüfen lassen, und es stellt sich raus, dass keine Fake Reviews dabei sind. Ein Amazon Produkt ohne Fake Reviews! Dachte nicht, dass es die noch gibt. Folglich habe ich sie gleich bestellt zum ausprobieren. Der Inhalt ist ordentlich. Alkoholpads, Staubsticker und die Folie gibt es doppelt. Dazu gibt es noch ein Microfaserputztuch, ein stück Pappe zum Blasenentfernen und eine USB-C Folienhalterung. Die Folie hat eine nummerierte Struktur, damit man jeden Schritt in der richtigen Reihenfolge machen kann. Hat mich komplett überfordert. Daher, wie überall auf der Verpackung vermerkt, erstmal das Erklärungsvideo angeschaut. In diesem wird jeder Schritt vorgemacht, damit man ihn selbst gut nachmachen kann. Also, Handy geputzt, 1. Folie abgezogen, auf die USB-C Halterung gesteckt und dann auf das Display aufgesetzt. Staub. Es gab so viel Staub unter der Folie. Das gewählte Zimmer war vielleicht nicht die beste Wahl. Folie wieder entfernt, noch einmal Handy geputzt, wieder aufgetragen. Ein Haar. Folie wieder entfernt, Handy und Folie geputzt, wieder aufgetragen. Luftblasen. Versucht mit dem Stück Pappe die Luftblasen zu entfernen. Nach einer Weile habe ich aufgegeben und habe einfach weiter gemacht. Als nächstes musste ich die obere Folie entfernen und dann von unten mit dem Pappstück die Folie nach oben andrücken. Getan. Dann das gleiche von der anderen Seite. Zum Schluss den Rand andrücken und die obere Folie entfernen. Nach dem Staub und Haar Fiasko habe ich nicht mehr viel erwartet. Wie ich mich getäuscht habe. Ich weiß nicht wie oder warum, aber die Folie sitzt perfekt, ohne jegliche Luftblasen, Staub oder Haare darunter. Ich bin voll begeistern. Einzig der Rand ist nicht so gut wie bei der originalen Folie. Dort war er abgeflacht. Hier spürt man ihn mit dem Finger. Sonst habe ich absolut nichts zu beklagen. Sogar der Fingerabdrucksensor funktioniert zu 100% ohne dass ich ihn neu anlernen musste. Wirklich ein tolles Produkt!