BD4802

I got the BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo today, and it’s been an absolute workhorse right out of the box. Pros Powerful and smooth brushless motor Excellent build quality — feels solid and professional The large work table makes control and precision easy Runs quietly even under load Cons Belt tracking takes a bit of fine-tuning at first The disc table adjustment could be a little smoother Overall, this sander is an excellent value for the price. It’s powerful, well-made, and ideal for knife sharpening or metalworking. I’d wholeheartedly recommend it to anyone looking for a reliable benchtop belt sander combo.

I ordered this sander combo specifically for shaping knife handles(I already have the same brand 2x42 for shaping the blades), and it showed up just in time for me to test it out on my first hand forged Mokume Gane billet, it worked great! I used the 1” belt for squaring up the edges, and used the 8” disk for flattening the faces. The motor seems to be a lot higher quality than the one on my 2x42 version! It has an extra 1/4hp, and seems to have a “soft start” compared to the other. Of course I really wish it had a variable speed controller so I can slow the motor down for sharpening knives but at this price point a VS is unheard of. Lots of other well thought out parts went into this machine, the dual adjustment knobs on the disks work table make it so you can true of the table perfectly, the holder on the side for all the small parts is a nice touch as well. It’s holds all 3 Allen wrenches as well as the miter gauge for the disk(these little miter gauges always get lost since they don’t get used a whole lot). I’m hoping to find some quality 1x42 scalloped belts and then I will probably leave this with the platen removed for shaping knife handles. I’ll leave table on the disk at 45 degrees for shaping the fronts on knife handles as well. The manual says they sell a 4”-(2) 1 3/4” Y for hooking this up to dust collection, but it isn’t included so of course I didn’t get to test that out but I did plug each side into my shop vac and dust collection was better than my harbor freight 12” disk sander. All in all I would recommend this to anyone looking at getting into knifemaking or like me, looking to set up separate tools for different processes.

The product met my expectations. It was easy to set up by the included instructions. It ran smoothly out when turned on. Quality appears to be superior to the Harbor Freight and Wen equivalent small belt sander products, plus it has a larger 42" belt and 8" disc sander. It runs quieter than I expected and I like having two different speed options. I have concerns that over time the plastic safety guard on the 8" disk sander will not last, it should be steel, though it should be simple to 3D print a replacement. I haven't owned it but a few days, so I can't assess this tool's long term reliability or durability. On its first project, it performed well.

its worth the money

Jumping up from the cheapo 4x36 from harbor freight, this thing met just about every expectation. So yeah, you reading this wondering what's missing from the description and pics? This is what you're looking for. Build quality is great. The plastic housing is that fuzzy feeling plastic, and it's sturdy enough that when you give it a nice slap (you know the one) it doesn't feel hollow and it doesn't have any 'give'. I was surprised. The arm comes with a smaller Platten you can screw into the main Platten to get those notches on knife blades that separate the tang from the blade. The guard/vacuum port at the bottom of the arm has thumb screws for easy removal, and I just keep it off because I switch belts frequently. There are 3 pairs of threaded holes on the side of the arm for mounting the table at various heights, or custom jigs if you make them. Annoyingly, the cast iron "table" that comes for the arm wasn't able to be adjusted square without grinding the mounting bracket slightly, and it's less of a table and more of a platform. Said "table" has no markings of any sort to get a specific angle or any stops for 90, you need to use a square or protractor to get the angle you desire. But it's completely usable with a machinist square. Keep in mind that's my only complaint with the arm, everything else is great. No wobble, great tracking. On to the disc: I use it less than I do the arm. It's using a Velcro backed disc instead of PSA, and I have yet to find an 8" replacement locally (though they do exist online). The nature of 'hook and loop' discs is that they may not sit exactly flush and have some give, so I may swap them out. The table for the disc side is aluminum, and reminds me of the cast aluminum tables on Craftsman stuff from the 80's. Not bad at all. It comes with a miter gauge that is pretty solid, and has angle gauges on both sides of the table. My biggest complaint here is that the dust collection guard below the table is plastic, and they ship the unit with a metal guard over the top of the disc to protect it that they instruct you to discard- I hope bucktool will consider swapping that plastic material for something metal, as with only a few uses the guard caught fire, melted into the path of the disc, then rubbed until that part fell off (Note: the guard on the belt arm is made of metal). Now onto the power. I have my unit sitting on an osb table top, not bolted down. I tried to see how hard I needed to press into the belt to get it to stall, and it scooted the machine instead of stopping it. So it definitely has the oomph to get what you need done. There's no wobble while it's running either. So what's my overall opinion on this thing? I'd say that for the money, this is probably the best 4x36 grinder you can get. I know you can spend more on other brands like jet, but I don't think any of that additional cost is going into materials. The additional 1/4 hp from the standard bucktool grinder is probably worth the jump in cost alone. So if you're hesitant about pulling the trigger, I say go for it. It's worth it.

Buen producto cumple su fin

I used this Sander for a max of 30 minutes and it blew the startup Capacitor. Buck tool service told me that they were going to ship me a replacement capacitor, never received the capacitor. When I contacted them again I was told that they were having problems with shipping it. I waited for two months and did not hear from Buck Tool. I again contacted them and asked them to ship me a replacement Sander or refund my money I was told to order another one and when I received the new one they would then refund me for the broken one. I will never purchase anything from Buck tool and would never recommend their products to anyone.

Bought this or my husband, and he is so pleased with this belt sander! It is easy to operate, and works so slick!

Now that I have several hours on it machine stalls out

Vraiment très bonne