F106SX: New Generation Fumoto® Valve with 14mm-1.5 Thread Size

I've been using the FUMOTO Oil Drain Valve for over 5 years on various car models, and it has been a game-changer for my oil changes. Instead of dealing with the hassle of replacing the oil pan washer and bolt every time (and always forgetting if I had one, having to go to a local auto parts store to get one, etc), this product offers a convenient solution. The installation is a one-time process, preferably during your next oil change when you're already removing and replacing the bolt and washer and reduces the total time to do an oil change to under 30 minutes or faster.Before purchasing, make sure to use the Fumoto Website to find which specific model will fit your car. In some instances, an adapter is needed, but the website tells you all of that information. I don't tend to trust the 'fits your car' from Amazon and always verify with the manufacturer directly. Another note on purchasing, I buy from the seller 'Fumoto USA' which is the official manufacturer. There are often other sellers, but I like to get direct from the manufacturer through Amazon instead of other resellers. It's not normally 'Prime' but I've usually had them ship same or next day, and receive a few days after in a small padded envelope, always in perfect condition.To ensure a secure installation, I recommend using a torque wrench and following the manufacturer's instructions. On many models, there is no actual 'washer' to install between this and the oil pain as it comes with rubber o-rings installed. Just make sure to completely clean off the oil-pan, make sure the old crush washer comes off, and its smooth / free of any dirt when you install this. Certain series (like this one) pivot and can swing around so you can position the drain port where you want which is a big plus. Once you start torquing it down, it will lock it in that position.Operating the valve is simple: just remove the provided clip and slide the lever to unlock it, allowing the oil to drain out effortlessly. It is a bit slower to drain, so I just leave the oil catcher there for 5-10 minutes and let it all drain out. If you're concerned about oil splashing, you can attach a small tube to direct the oil flow into your pan.For the safety / security minded - I've never encountered any issues with the valve opening on its own, thanks to the included locking clip provided. I can't see how anything could accidently open if it wasn't intentional.In my experience, this is one of the first upgrades I recommend for anyone interested in performing their own oil changes. It saves time, makes the process cleaner, and enhances overall convenience. Combining it with Rhino Ramps to avoid jacking up your car and using a quart bag around the oil filter when removing can result in completing an oil change in less than 30 minutes with minimal mess. I always like doing routine maintenance myself so you know it's done right and cheaper than a typical shop. Also pair it with a 'maintenance book' so you log the mileage and services you did. Normally I also rotate my tires every other oil change, and check all other fluids.Overall, the FUMOTO Oil Drain Valve has never let me down, and I highly recommend it to anyone looking to streamline their oil change routine.

Excellent product have bought this make for over 15 years on various cars that I have owned and never had any issues, great for fast oil changes and fool proof lock to prevent leaks.

Installed several months ago on a 2017 Chevy Trax. Easy to install and no leaking. Next oil change, just pull off blue safety clip, release lever and watch it flow. No tools required.

Exactly what I was needing. Easy install and now easy oil changes

I had originally ordered the F106N for my 2012 Mazda MazdaSpeed3 and 2012 Honda Odyssey V6. Unfortunately, there's no way to install it because the drain plug is recessed around the drain pan. The realized Fumoto sold an adaptor that extends the F106N further out to you can install it. However, issue is now the drain valve sticks out too much and the MazdaSpeed3 has very low ground clearance.Then accidentally found this model, the F106SX which is comprised of two parts. The threaded bolt and the drain release handle housing. So basically, the drain release housing does not rotate while you tighten down the threaded bolt section just like normal drain plug through the drain release handle housing.That's it! Ingenious, solves two issues with this one product. Solves the precarious ground clearance issue as well as bypassing the extension to clear the recessed drain pain design.Edit: One caveat is that if you ever remove it for any reason say to transfer to another vehicle, I'm pretty sure that you will need to replace the 2 o-rings (1 for the oil pan side and the other for the valve/housing side.

I added this to make it easier and less messy to drain the oil on my diesel pickup. We travel and being able to do an oil change on the road without risk of a massive mess is a good thing. This works as intended. I bought the drain that allows you to mount at any angle so it's well protected by the oil pan. I also bought another security latch. No leaks from the mount or the sleeve o rings. My only negative is oil flow. I knew it would be slower so no surprise but I wonder if the drain is less effective because it doesn't flush as fast. I can always unscrew it like a drain plug if I want but thought the concern should be part of the review.

Fit my 2007 Kia Sedona. Makes oil changes so much better, quicker, and easy. I recommend getting the hose for it to drain it into a container easily

Highly recommended. I’m too cheap and paranoid about letting someone else change my oil. Who knows if they are even putting in synthetic. This valve makes changing your oil a breeze. Faster and no mess. I put it on my 2023 kia telluride and now i don’t even need to ramp the car when changing the oil.