Pop Filter, PEMOTech [Upgraded Three Layers] Handheld Mic Shield Mask

I picked this up originally because I was trying to deal with plosives, the P sounds, S hiss, all that stuff that can make recordings sound harsh or poppy. I didn’t expect a huge difference at first but it honestly helped a lot more than I thought it would. I’ve used this filter across multiple microphones over the years. Started on my Blue Yeti, then moved it over to my Audio M Nova, and now I’m using it on my Tonor 777. So it’s definitely been through a few setups and it’s held up the whole time. Build quality is solid. The mesh and inner layers have lasted years for me. The only thing that didn’t last forever were the rubber bands it came with. A couple of those broke and I lost the others, but that really wasn’t a deal breaker. I just use a small scrunchie band to hold it on now and it works perfectly fine. Sound wise it definitely cuts down on plosives and helps tame some of the high end hiss from S sounds. It’s not magic but it noticeably smooths things out, especially if you talk close to the mic. I also run mine with extra filtering, like a foam windscreen or sock over the mic itself, so I’m basically triple filtering. That plus software filters really helps isolate the voice and cut background noise. Obviously a full isolation booth is ideal but most people aren’t doing that, so little upgrades like this help. For around 10 bucks it’s honestly a solid buy. Cheap, durable, and it does what it’s supposed to do. If you’re recording vocals, streaming, or doing voiceovers it’s definitely worth having in your setup.

Fits onto most microphones I've used it on, including the HyperX Quadcast I currently use. Reduces popping and unwanted clicks very effectively after an easy installation. The material cancelling the sound is quite good, but outside material holding it together is rather cheap plastic with some remaining artifacts. Would prefer if the entire product was made of a stronger material, but that doesn't get in the way very much. Overall a solid pop filter that enhances any microphone you put it on.

it did its job quite well and us easy to put onto the mic

EASY TO USE AND SOLID PRODUCT

This pop filter is just the right size to cover the Blue Yeti microphone (see pictures). I like how small the form factor is, allowing you to see in front of you (and a camera/person can see you). It looks very professional. You need to use all 4 of the provided rubber bands to do this. There should be two already installed on the pop filter and two more in the box. Simply tie them together in pairs of 2 and reinstall them. There are two plastic half circle pieces behind the filter screen on which the rubber bands are stretched. You can actually clip one of these half circles onto a Yeti microphone right after the lip separating the body from the grill (metal mesh), which is also where one of the rubber bands will rest (see pictures). The tension is barely strong enough to hold the Yeti in place, but I still prefer to use the rubber bands for safety. This placement is just the right spot for it to stay forever, and I never have to worry about bumping my pop filter again. Since it is directly attached to the microphone, it goes wherever the microphone goes. Overall I recommend this to anyone looking for a smaller form factor pop filter that still covers the entire microphone, at least the parts you'll be speaking into. Note: if you clipped the pop filter on and it isn't covering the whole microphone grill, then turn it upside down and try again. The clips are not evenly spaced on the filter, and you want to have the one that is closer to the edge of the filter clipped onto the microphone.

This does the job, and is large enough to fit any of my condenser mics. It is not, as advertised and illustrated, three layer: the fabric backing is nonexistent. Metal mesh and foam do the job just fine, however.

I'm not a professional by any means, but I do some voicework as a hobby. I've had a flat, armature pop filter before, and it did nothing for my cheap microphone. As I just got a Blue Yeti, I decided I could do better. This one looked the least like my old one, so I went with it--and man, it works. Sticking it on took me a minute. It came with instructions, but they weren't helpful. I had to look at pictures in the reviews to get some idea, and the end result was guesswork. Once I had it set up, I recorded the same set of plosive sounds and phrases without, then with the filter, and the difference was visible on Audacity. It does seem to quiet the sound a bit, but it also quieted the fan that runs behind me. Audio seemed nice and clear without my sharper vowels spiking the wave. All in all, fantastic for the price. We'll see what I think once I've used it a bit more.

I recently discovered the PEMOTech Pop Filter and it has made a huge difference in the quality of my recordings. The upgraded three-layer design (metal mesh, foam, and etamine layer) effectively blocks out unwanted pops and hisses, resulting in clear and professional-sounding vocals. As someone who is just starting out in music, having a high-quality pop filter like this one is essential. It has made a noticeable difference in my vocal recordings for YouTube videos, streaming, and other projects. What I love about this pop filter is how easy it is to use. It fits perfectly on my handheld microphone, and the metal clamp ensures that it stays in place during recording sessions. Plus, the included foam cover is easy to remove and clean. Overall, I highly recommend the PEMOTech Pop Filter to anyone who wants to take their vocal recordings to the next level. It has been an invaluable tool in my music journey, and I'm sure it will be for you too!

Cumpre o prometido e serviu ao meu AT 2020

جيد جداً

Si se usa a una distancia adecuada (a una cuarta de la boca) cumple con su función, pero al acercarte aunque sea poquito al micrófono, empieza a popear. Por eso no puede tener las tres B; siempre es barato y bonito, pero no siempre es bueno.

It works great. There is a significant difference in popping being picked up by my mic (audiotechnica at2035). Only negative thing I can say is that the image makes it look like the front is shiny metal. It isn't, so don't be fooled by it. It looks more matt metal like other similar products on amazon. For me that was the deciding factor why I paid more for this one (the shiny metal), but it is just the same as other ones. It is still cheap and effective!

Both are solid products. Cant go wrong for the price.