Smart Wall Switch H1 (No Neutral, Single Rocker), White

Really nice looking switch with only one flaw (for me) Nice and easy to wire looks clean and tidy and pair easily with your zigbee network. I have several of these around the house and the battery version too. I am not sure where the issues are for other reviews saying that they drop but I suspect they have other issues since I have never had any of the 97 something devices drop. I must have 30+ Aqara devices. The only negative I have is they are a bit noisy when turning on or off (remotely or at the switch). I would prefer a softer sound instead of the click. They work well as a two way. As I continue to decorate and replace the manual switches in the house, these are the ones we are replacing them with, in both the double and singles.

Easy to install and works perfectly.

Easy to install, works quickly via voice control, but more importantly works as a normal switch for everyone else. Wish I'd bought these earlier rather than all the smart bulbs..

Eventually works, but is not as simple as you probably think. In a no neutral setup the switch works defaulted in dumb switch mode, ie it's cutting power to the light just like a 5 quid switch. You can pair it to home assistant and see and control the switch. Ideal if you want to turn a normal light into a semi smart light. However if you want to use the switch to control a smart bulb, or multiple smart bulbs you have to go into the zigbee control and put it into decouple mode. This in theory lets you use it in HA as a switch which can control multiple smart lights on different circuits eg lamps and ceiling lights together. Note however in most likelyhood the low wattage smart bulb will not be able to keep the switch powered and it will cut the power and reset to dumb mode. In this case you will likely have to fit an additional safety capacitor to the circuit, usually at the ceiling light fitting, to leave enough current in the circuit to keep the zigbee switch powered and active. So you can get it to work in a smart light setting, with no neutral but not plug and play for this use case.

Value for money, and it works great. Bought this for my Home automation. You don't need the Aqara hub; it connects and works fine with Home Assistant. Simple click works every time, and the design is sleek and will fit nicely.

Purchased H1 switch without natural Hub M2 Smart mini remote control Fitting the H1 switch was very easy and quick Setting up the Hub was also quite easy It took longer than I thought to set up the remote control but found the Hub need a firmware update which took about 10 min After that single press on the remote works very well Also works with alexa Will be getting 2 more H2 switches shortly So should be able to control all 3 from the remote Would recommend but you do need a but of IT knowledge for the app

Good piece of kit, especially useful if you don’t have a neutral to your light switch. You will need an Aqara hub but these are relatively inexpensive and can support multiple devices. Good integration with Apple Homekit via the hub using Matter.

It works but it’s loud! Also doesn’t emit zigbee event when manually switched on/off

Funkade kanon att installera och använda, kopplas det via aqara hub och appen funkar den i Google Home, ansluts den via Xiaomi home appen så funkar den i te i Google Home.

I was hoping to fit two switches side by side in a standard Dutch NL🇳🇱 Setup. Unfortunately the switch is 5mm too wide and two switches will not fit the standard (inbouwdoos voor dubbel schakelaar) It is however no issue whatsoever when placed as. Single switch. Great build quality. Too bad does not support dimming.

Très bon interrupteur mural Aqara H1 : installation propre, finition qualitative et surtout hyper réactif en Zigbee. L’appairage se fait rapidement, la connexion est stable et il remonte bien les infos (états/commandes) dans home assistant. Parfait pour remplacer un interrupteur classique et gagner en automatisations. Je recommande.

We were frustrated with the limited designs/ and-or prices of the smart celling lights that integrate with the HomeKit. Thus we decided to buy a dumb LED-celing light and hook it to a smart switch. We couldn't be happier about the decision. My wife got the light fixture of her choice and I got the option to make the light smart. PRO'S: - Probably one of the very few switches I found that doesn't require a neutral wire and support HomeKit integration. - Great for the apartments/ houses that have old wiring. - Very easy to install. Plug in two wires, are you are set. - Quick setup and integration through the Aqara app, and into HomeKit. - I have the switch bound to a third-party motion sensor through HomeKit automation. The response time of the light is instant. CON'S: - Requires an Aquara M2 hub. That's an additional investment you need to make. - Doesn't work with the Hue hub, and also doesn't integrate directly with HomeKit. - No dimmer function. Not available through Smart Home apps either. - The switch doesn't come with the clamps on the side like the usual EU switches. - The click on the switch though responsive, doesn't feel premium. Maybe I am used to haptic feedback on the MacBook trackpad, but the click on the switch could be improved further. Overall, the switch does a great job for which it has been advertised. If you have a pocket deep enough to go down the rabbit hole of Smart Home, this switch would help you convert your existing dumb lights and switches into smart lights.

Muy buena calidad y facilidad de conexión. Tras la instalación casi nunca se desconectan ni fallan.