50" LED Warning Lightbar

The media could not be loaded. We installed this light bar on our PeterBilt for over size load towing operations , we made our own mounts, simply because this particular bar Mounting system is not designed for our application, so I can’t comment on the mounting system provided, but the light bar It’self; It is super bright even in strong sunlight, It is a prewired light bar with a plug, that plugs into the control panel (included in the kit) you mount inside the cab, the wiring is 12 feet long, plenty enough wire for our application. It is “Super easy“ to wire you don’t even need to read instructions. Hook up the Red wire to the power & black wire to the ground, wire in the left and right turn signals (which will also allow the brake lights to work on the bar) if you want them to operate on the bar, they are marked left & right, if not, no worries, it will work Just fine without them. You can hook it to a switch or direct to the battery. If you hook it to a switch and preset the controller, each time you turn the switch on it will light up with the previous controller setting. If you want to change the setting you simply change the controller setting while it’s lit up. This is a “super simple” light beacon to hook up and operate and works great, we would recommend to anyone !!

Great Light bar for the price, I had a little problem with a shipping company that yantech solved for me. To which I'm grateful for as I can keep working. The bar is smaller than I anticipated but will work for my application, and will be legal for the job in all states run in. Will take it on a test run in the next few days and report back how well it works...as for now I leave it at 5 stars

The lights are wonderfully bright.I have 2 wishes.1:) Longer cable or Cable extension available for sale. 12 feet is simply too short for many applications.i.e. Headache board on a rollback is about an 80 foot run.2.) running lights on the bar.Install was easy. We choose to take off rubber feet and bolt on.Leaving power on the control box retains memory of last use of front and rear lights. Which is a nice feature.

This isn't a bad lightbar at all! Nice and bright even during the day. Only down fall is the horrible instructions, almost as if someone who doesn't speak English wrote them out... Me and my wife went without the instructions but 2 times to look at the only 3 or 4 pictures. Once we finally figured out the bar and mounted it all we looked over the instructions and then it kind of made sense.I think this company needs to put more details in the instructions and at least label what all the hardware goes to and not put it all in the same bag and make it a guessing game.I also wish some of the wires were longer, the positive and negative wires were just long enough to connect to the battery.If anyone needs help installing you can reply or mostlikely I will put a guide with my post later in the future.Update :I wired the tale lights/turn signals. They are bright and beautiful, only problem is they were labled wrong, but I just touched the wires to the battery and figured out what goes were.(I still haven't wired the cargo lights and I probably won't due to it not working when I touch it to the battery. )

They needed to make it a little bit longer on the wire From the lightbar to the controls I had to add on six foot

Works well! Nice control panel with indicator LEDs give graphic depiction of what light bar is doing. Stury gutter clamps hold in place without drilling holes in cab. Brake/turn lights very effective.

Very easy install very bright love the lightbar seller is awesome

unit was defective and contact manufacture in China