SPRAY LOW ODR CLR MAT 11OZ(6)

I make nail decals and use this to seal them! It’s great for decals and also if you don’t want to seal them outside. I’ve tried the original spray and it was entirely too strong to spray indoors even with ventilation. However it’s a hassle to always go outside to spray as you need to apply a few layers and I don’t have a backyard. This spray is good for indoors! Open your windows and possible have a fan/vent on. But the smell isn’t strong at all in my opinion. I apply 3-4 layers for water slides nail decals. If you don’t apply enough sealant your decals will bleed or fade when using them. If you spray too much your decals will be to crunchy and break easy. 3-4 thin coats seems to be the perfect amount in my experience. Don’t spray too close and don’t spray a lot!! Even thin coats every 15-20 mins works well. I usually wait a few hours after the last coat to use them. I do wish it was cheaper but I make a lot of decals out of 1 can so it’s worth it!

I have breathing problems and I love this because it doesn't affect me like the other spray cans do.

I used this for some tree stump centerpieces I made to coat the bark edges to help keep the bark from chipping off. It worked great and actually made the bark look better than it did before. I used it outside because it did still smell - not as bad as most spray paint but I wouldn't really recommend using it inside unless it's a super ventilated area.

Bought this to use on a cork table top to provide better long term use. Application of the matte finish spray went well, and it looks great! Excited to see how the finish holds up

Before you use this product, practice on a scrap surface. See how fast it sprays, what’s the best distance from the object. A few light coats are better than a heavy coat. A well shaken can will not spit. Over-spraying causes shiny wet blotches to appear. The fixative works well. The lack of odor surprised me, but I used a simple mask and spayed outside to be cautious.