HOOBRO End Table with Charging Station, Narrow Side Table with 2 Drawer & USB Ports & Power Outlets, Nightstand for Small Spaces, for Living Room, Bedroom, Rustic Brown and Black BF541BZ01

This was just the size and style I needed for a small table to keep by my chair in the living room. Assembly was easy enough for this 70+ grandma to manage with few difficulties (some of the screws were a bit hard to get tightened, but I got there). Love the location of the charging ports - didn't want them on top of the table as so many are - and I love the extra shelf above the small drawers. Cute and very functional.

Nice little stand. All the pieces were in there, even extras. The only issue we had is one of the holes to attach the top was not drilled out. We just used 3 of them. It's still very sturdy with just 3 so no biggie. Would recommend!

These are absolutely beautiful...if you can manage to get them put together! I bought 3, can't even get one put together! The pieces and hardware are labeled great, the screws and hardware are labeled great, the instructions are simple and easy to understand!BUT, the screws that are supplied are CRAP! They are not steel, they are soft aluminum painted black at best. Which means the heads strip out before you get the screw halfway in. Then you have to get another... then another... then another... then you run out!Best advice...take each of the sizes of screws and go to a hardware store, match them up, and get REAL screws! It's not worth the headache to even start this project without getting sturdy screws first! 😡~~~~~~~~~~~~UPDATE~~~~~~~~~~~~~~I went to Menards and bought all new screws. The only thing I didn't have to buy was the frame bolts and silver bolt and cogs that go on the drawer faces.... but all the screws were just junk.... maybe I got a bad batch, but it was an ok fix once I managed to find replacements. A few of the round cogs were kind of loose in the holes, but nothing a little Gorilla Glue wood glue didn't fix. You should always add a good wood glue when putting any furniture together, solid wood or pressed!I will say that these stands are absolutely adorable in a rustic farmhouse simple way. I absolutely love them, and they look great. They have an even and clean look, and would fit into any color decor perfectly. Would be nice to have the option of getting these in a bit wider size, the height is perfect... level with the arms of all the recliners and sofa. The two drawers are great for remotes, cables, books, etc.The deciding factor in buying these was the power port being on top of the drawer box and not right on top of the stand or under a hinged top that makes you have to move whatever is sitting on top to access the power port. The placement of the power port makes it easier to have a lamp. The power port being where it is is a godsend for when all the kids are here and looking charge boxes and outlets. Now I don't have them moving the sofa and recliners to reach the wall outlets and running 10-15ft charge cords so over my living room floor! Yeeaaaa!I am in love with these stands, now that I got them put together. Was a bit of a headache at first getting them together... but bdefinitely worth it! ❤️

Very nice looking end table. Sits beside my recliner, where its narrow fit is perfect for my limited space. With both a 120V electrical outlet and USB A / USB C charging ports, it provides everything you need to keep your tech going. Drawers work well; assembly was straightforward. Very happy with this end table.

These are very well made and make great night stands for your bedroom especially if you're limited on space.I really love the charging/electrical ports on the shelf. That's super convenient.The drawers are quite small so they don't hold much but they are made of wood, not the cloth type of drawers that don't hold up well.

Perfect for my small computer corner in my studio. Holds my label maker on the shelf, the label cartridges in one drawer, and then all the "at hand" items I need: pens, note cards, etc. Just put in place, and haven't settled on the top items, though a lamp and the phone charger work there. There are adjustable feet on the legs, making it easy to use in a house as old and uneven as mine.Pretty straight forward to assemble. An elevated, flat surface was good for this 68yr old body. I suggest opening the cardboard it came packed in over a raised, sturdy surface and work on that; it will protect the piece from being scuffed or causing scuffs on your level surface.They suggest at some point to put in a couple of the screws with a screwdriver attachment on a drill "and be careful about the torque." I just used the drill to create pilot holes and then used my manual screwdriver to put in the screws. Less likely to over-tighten that way...There are drawer stops installed in the first couple of steps. These will keep your drawer from coming out (which I did want). Your mileage my differ. It makes sense in my space, but maybe not in yours.HOWEVER, NOTE: If you do use the drawer stops, DO NOT insert the drawers to "test fit" them before finishing up the tightening of the frame. The drawer will not be coming out and you'll have to finish tightening down with the drawer in place... Insert the drawers when you're almost finished tightening to make sure the frame is plumb. The drawers won't be coming out again, but it will be much less of a hassle than if you left a lot of play. Plus, the drawers introduce a good bit of weight, making it awkward to fling it around to finalize the bolts. Like I said, it's a sturdy little thing!

Was trying to find a narrow but functional side table for my bedroom, we don’t have much space on the side of the bed since our king bed takes up most of it. But we wanted something to put small items. It looks very nice with my bed room furniture, well made. I love the plug in outlets that it has and the shelve space in between.Building it was easy, my husband took care most of it since I’m not good at building things but I helped and it was straight forward. No missing parts in my shipment, everything needed came in it.For the price, it’s not real wood or as 100% strong but it serves its good purpose. My cat loves it and will just lay in it (pictured above, I love her). It does have a very slight wobble but it’s not dramatic unless you’re very anal about it, although if you’re nifty you can probably figure out how to fix it.Overall I recommend if you’re in a slight budget and just want something for the time being

Very difficult to put together. However onceit is erected, it is nice and sturdy. The charger is an added feature.

This product has no charging station. It seems like the seller tried to sell a product, but it’s very clear. This is handmade and not very good quality. Don’t purchase from the seller.

Very sturdy end table, well put together. Parts layout and instructions are good. Power plug is nice touch. Note: the drawers are not on rails.Good buy, looks great.

Perfect color and size exactly what we needed love it very nice

I bought this small table to use as a coffee centre. It arrived quickly and my wife and I assembled it that afternoon. I took 2 hours. It is similar to the way Ikea furniture is assembled. Unfortunately one important instruction was wrong. BUT I was able to figure out the proper way. The other minor problem involves the screws which are black and are screwed into a plastic part which is also black. Very good lighting is important.In use, the table is very helpful to hold my new Nespresso machine and the drawers are big enough to hold the coffee capsules. The metal frame is very sturdy and the bottom of the legs can adjust to level the table.The power outlet is OK but not necessary for me.The simulated wood grain finish is quite nice and fits in with my other furniture.Overall, I recommend this table when you have limited space.

Très belle apparence, solide et rapide à monter