Blisstime 6 String Acoustic Guitar Bone Bridge Saddle and Nut and 6pcs Ebony Guitar Bridge Pins

bought a budget acoustic and had the typical plastic bridge, nut and pins on it, so i figured I would take a shot on this for the price. fits perfect and the tone changed and got brighter, not tinny but a drastic improvement in clarity and sustain wow. thanks! Worth every penny.

Have used these on several gutars now. Good quality. I like the sound of ebony pins.

I fitted these onto my Fender dreadknot and they have really changed the sound for the better. They all took a little bit of sanding to fit perfectly but in the end it really wasn’t much work. The nut was the perfect size, and fit even better than the original plastic one. The saddle was just a hair too long and tall, so I took it in on either side, and down a bit. The bridge pins are beautiful and we’re just a little too thick, but fit fine after some light sanding. They look and play great!

Put this nut, saddle, and pin set on a mono price Idyllwild hundred dolla cedar top acoustic. Could not have asked for a better match! The nut was perfect replacement fit in all dimensions but for a fraction of a millimeter on each end too wide that sanded down to size easily. Compensated saddle was also a drop-in replacement for the stock plastic, but I took the height down a couple mm for action adjust. Bridge pins look nice, like in the listing pics, but also required a few swipes of a file for a snug but not forced fit. These adjustments are not complaints, I'm glad they arrived a hair too large, because you can take some off but you can't add it. I feel like the guitar went from "nice" to "very nice!" This DIY upgrade was worth several times it's price in my eyes and ears. (remember to wear a mask when sanding bone or ebony as the particulates are unhealthy to inhale)

This little bundle has really good quality. I have not used the saddle or nut on any guitars yet but it's good sturdy bleached bone, I'm sure it will work nicely if I ever get around to using them. The pins look great! I had to sand each one of them however, it was not a perfect fit. I half expected this though and was ready to sand them down a bit. Once they were all sanded a bit they went in nicely. I'm very happy with the pins they look great!

I bought these ebony pins to replace the standard stock plastic pins that were OEM in my Big BabyTaylor. They fit perfectly right out of the bag, very simple install overall. Visibly, these are an immediate upgrade from the plastic pins, the heads are really nice looking. Sound-wise I don’t hear a major difference with these ebony pins versus the plastic ones, potentially there is a bit more sustain but I can’t honestly say if it’s that much better or not or if it’s even a measurable difference unless I run it through the computer in a controlled environment. The nut and bridge are great, I used these to replace a damaged set on a 1970s Yamaha FG, and after a bit of sanding to get the bridge down to the right height - it worked great.

This is an insanely cheap guitar tweak. I have a guitar that I bought for half off ($99 + tax) at a big box guitar store. It sounds like the birch x-braced guitars that used to be made by Harmony, Kay, Valco, and others. I use it for playing slide. I've been making some minor mods with the criterion that I spend no more than $25 total. I installed a pickup I bought on ebay over 10 years ago and changed out the saddle and bridge pins with these. I may install the nut when I feel like spending more than 15 minutes on it. The guitar sounds slightly different with the possibly bone saddle and wooden bridge pins--a bit woodier with a tiny bit more sustain. The intonation with the new saddle is fine. The pearlescent inlay on the bridge pins adds a cheezy aspect that I would never want on a "real" guitar but for this one it's appropriate. The saddle is not quite long enough for the slot but it's not noticeable unless you look for it.

I ordered 2 sets at separate times the first set work great. The second set never arrived the package was open and it was empty. Tried to contact them but never got any help. They worked great my acoustic electric Keth Urban brand cheep but sounds good.

Excellent replacement bridge saddle and pins for a fender paramount series acoustics. Saddle was slightly larger than the slot so a quick light sanding on both ends of the saddle and it fits perfectly. The bridge Pins are an excellent fit and look great!

I pins (o piroli che siano) venduti come EBANO sembrano essere in materiale plastico, anche se di buona fattura e belli al tatto

Not sure if bone or ebony, likely plastic, but well made and were prefect replacement on my guitar. Filed down to my preferred action and the detailing on the bridge pins make them look very good. Very happy and guitar has a new lease of life.

Mejora el sonido de forma perceptible. Agudos más redondos y definidos. Perfecto!!

good salesman, good stuff