Amazon Basics Full Motion Articulating TV Wall Mount Bracket with Swivel and Tilt Features for 32 to 80" TVs and Flat Panels up to 130 Lbs, Black

Got it yesterday and installed it last night. Comes with a paper template you tape to the wall that shows where you drill into the wall for the 4 support screws. NOTE : you still have to find your studs in the wall, but the template sure makes it easy to know where to install the screws. Also, the mounting bracket is very heavy-duty and has a leveling 'bubble' on the bracket so you know when it is level...that is a neat extra. Mounted a 70 inch t.v. that weighs about 80 lbs and it handled it easily. THIS IS A DEAL for what you pay. Mounted on a parallel wall to bed and now I can swing it off that wall and have it viewed from the foot of the bed, yet swing it back and out of the way on the side wall. ALSO, once the mounting plate is screwed to the back of the t.v. it's a snap to affix to the bracket arm...that is a HUGE plus. Next point...comes with lots of extra screws and bolts to handle any needed application for mounting your t.v. to the wall bracket. VERY WELL MADE AND THOUGHT OUT. A BARGAIN at the price. Last point, the bracket does swing 90 degrees either left or right, which is handy if you want to install on a side wall and open and turn 90 degrees...however, keep in mind that the arm is 20 inches so you can't quite turn a 70 inch t.v. 90 degrees when the arm is extended, because of the width of the t.v. Almost, but not quite. STILL, completely satisfied with this purchase.

I must say I'm impressed. This mount is about a third the price of comparable mounts and did exactly what I wanted it to. It’s very well made and seems strong enough to hold a much larger TV than I installed. I used this mount to hang a 55 inch LG LED TV on our patio. Installation was very straightforward and took about an hour. The directions and diagrams in the instructions are decent. All hardware and fasteners were included. Anchors for cement walls were even included. The paper template for stud hole placement and leveling is very helpful. As others have mentioned, the wall mount plate does not have left / right adjustment for stud lags; the placement of the wall mount plate is dictated by where your studs are. Don’t guess; use a good stud finder if you are installing into a wall with wooden studs. I have the TV mounted near the ceiling, so two people were required to lift the TV overhead to mate it with the wall mount. The swivel and tilt functions were the deciding factor for me. On my patio, I need a fair range of motion. Extending, swiveling and tilting the TV requires a bit of effort but it stays in place when you get it to where you want it. It does not flex or vibrate when the wind blows or someone is walking past it. If I need to hang another TV in the future, I’ll buy this again. Well done, AmazonBasics.

I’ve had the opportunity to use several different wall mounts over the course of years, and I found this one to be one of the easiest to install and use. As others have said, this is a very heavy duty mounting bracket, not flimsy in any way. Rest assured, this mount is very stable. I do understand that others have had the problem where the mounting plate covers the ports on the panel... thankfully in my case, this wasn’t a problem at all. I purchased this as a recommended item with last month’s great deal on the TCL 55S405 4K Roku TV, and it mates well with that panel. I will say that I was disappointed with the location of the VESA mounting holes on the TV (400x400), but not centerline to the TV, but rather the holes place the mounting bracket about 1/3 up from the bottom of the screen’s frame. (But that’s going to be part of my review of the TV) Lastly, the tilt feature is nice for reducing glare (up to 15 degrees down), and the circular mount ‘post’ allows for minor adjustments in horizontal rotation from side to side. I know my wall mount is level, but I still needed to tweak my panel slightly. I found that it’s best to tighten the locking ‘safety’ screws only as far as it will allow you to ‘nudge’ the panel from side to side.

This is an awesome TV mount. It is properly constructed and feels heavy duty for sure. It took me a while to figure everything out, but the instructions are good enough to get the job done. It would help to have larger illustrations and to keep the English all in one section of the manual rather than breaking it up by language. For my Samsung 46 inch lcd TV, I had to borrow some bolts from a different TV mount kit since the options that came with this mount did not fit perfectly. I think I substituted 2 of them and 2 from this mount did fit. I am thrilled with the quality. The TV is 30 pounds. It swings out very smoothly and angling the TV downward is very easy if you need to do that. The mount was installed perfectly level, but once I got the TV attached, it looked quite crooked. That's where the 2 screws for adjusting the TVs leveling came in handy. Absolutely a great idea to add this feature. With a few adjustments, the TV was level. This was the perfect addition for my "pain cave" in our garage. I use our Schwinn IC4 stationary smart bike with the Zwift app on this TV for fun, challenging workouts. I could not be happier with the finished product!

I bought this on a daily deal in preparation of buying a 65" TV. After getting my 65" LG I set about installing the bracket. I want to point out that this is a well designed and sturdy bracket, a modern TV is much lighter than expected, but I have no doubts this bracket will hold the rated weight with the expected safety margin. I was very surprised to see that my TV had such a small mounting hole pattern, great I won't need adapter "wings", I can use the main plate. I selected the correct screws from the huge selection supplied however while the width matched one of the hole pasterns in the plate, the height did not. This required me to drill extra holes and use a combination of the "wings", spacers and extra hardware. I got there in the end, but honestly looking at the selection of screws, plates and such I found it had to imagine a TV this wouldn't work on. So my advice; if you can investigate the mounting holes prior to using this bracket: It is geared for hole patterns that are wider than tall. Mine were just about square, The "wings' are meant to extend at an angle away from the main plate as well, so they do not work for simply a wider or taller reach, they need to be wider and taller. It's possible the unit sized for 55" max would have worked, both from the mounting set up and due to my TV being light for it's size, but I would never purchase or suggest the purchase of an "undersized" mount. Pros: Built to a very high standard, excellent value for money. Very sturdy, good welds, thick material. Built in bubble level for the wall mount. Excellent array of screws and hardware. Simple to "hang", with the two part system. Easily adjusted for level and angle once the TV is mounted. Cons: Not designed for all TVs, investigate your TV's hole pattern. Mount is designed for rectangular patterns. (knocked a star off for that.)

Great TV mount for the price. I mounted a 43" TV in about 20 minutes. It's solid and the arm is versatile for multiple viewing angles. Everything you need is clearly labeled in the box and labeled with letters. If you can play connect the dots you can install this mount with ease. The instructions include a super handy guide for the drill holes and placement. The rest is just matching up lettered tools with the mount and TV. The most important step is finding those wall studs. This mount is used with studs 16 inches apart. The kit comes with dry wall anchors too but I wouldn't recommend using that for any TV mount. Use the nice lag bolts into solid studs and you are secure. This mount is slim and has nice openings to use for a recessed power outlet install. So far so good and no issues.

I bought one of these and installed it and bought a second one minutes after because it works so well. I am using them to "corner" mount two tvs above/below each other in my garage. The arm being able to extend out 19" from the wall and the full swivel allows you to mount them flat near a corner and then pivot the TV out to make a perfect 45 degree angle in a corner. Installation was very simple. Mark where you want the mount to go, drill pilot holes, screw in lag bolts to bolt the mount to the wall, and verify it is level. You don't even have to level the mount perfectly as the mount allows for tilting the TV +-10 degrees or so to make sure you can level the TV out perfectly. Attach the mounting plate to the TV and hang it on the mount. I will be buying more of these whenever I need to wall mount any TV's in the future.

Extremely easy to swivel, but it's also very sturdy and reassures you how safe it is with the built-in leveler. I think a lot of people don't realize how badly they need a swivel mount until they get one. It's practically impossible to ever change your HDMI, audio, or Roku/Streaming devices. After ten years of having one of the older ones that isn't this, we're painstakingly pulling it off the wall and throwing it in the trash after assembling 2 of these already. A third one (the 32-to-80-inch) is on the way. We had the "top seller" one to save a few bucks but that doesn't have motion. It's awful. You need a specific screwdriver to swap out a new television (or repair it), it's burdensome, and you can't reach any of the HDMI or ports. You're also terrified if your wall is going to fall off. You're going to be swearing up and down with your phone's flashlight trying to figure out where the hell any of the parts are in a half inch of space. Seriously, at least 100 times of trying to get back there and using every colorful word I could imagine with those non-swivel things. This one has extremely fluid motion, but stays still. The TV only moves when you want it to move, and stays perfectly still when you leave it alone for 15 months. Assembly is always scary at first for every wall mount (you're drilling holes into your building's structure for a 100lb television to not crack anything), but this is easily the cleanest install. After owning the other one for 2 years, I had forgotten how to do it again. But it was hanging up within the hour. If you're a first-time wall mount installer, read every direction extremely carefully. I think a lot of the 1-stars here got a little too gungho and just started drilling without actually mapping where it was going to go and how much space they needed.

Super article. J'avais besoin de ce support articulé car j'ai mis cette TV dans un espace de travail avec plusieurs bureaux. Le bras articulé, avec un déport important permet en un geste de passer d'un bureau à l'autre et d'avoir toujours une excellente vision de la TV.On peut écarter la TV du mur de façon importante d'une part et on peut aussi passer d'un angle important à un autre, avec possibilité tout en ayant la TV en hauteur , même si on est assis à un bureau, grâce à l'inclinaison réglable, de toujours jouir d'une vision parfaite sur la TV. Je je parle même pas du montage de la fixation au mur tant c'est enfantin. Je n'ai même pas lu la notice. Le support est monté avec plus de 50 vis, rondelles et autres accessoires qui permettent de s'adapter à toutes les configurations possibles. Perso, parmi les 50 accessoires fournis dans une pochette, j'ai utilisé 4 chevilles, 4 tire-fonds pour fixer au mur et 4 vis pour fixer la TV sur le support !

Wow, now this is a wall mount. This is exactly what I wanted, it's heavy (about 10kg) and with the right fixings will hold any tv you give it. I bought for my kids 32" TV's in their bedroom and this is probably overkill for that but I wanted strong for them. It comes with 10mm Fischer wall plugs which are superb and strong washers and hex screws for the plugs (requires 13mm socket). Would highly recommend, this feels like it's worth £50!

This is really awesome product, we love it. Pros: 1. It's heavy duty item with good build quality 2. Comes with template to drill the holes 3. Supplied with lot of screws, washers, bolts (VESA compliant) 4. Easy to install: It tool me around 2 hours to finish the work 5. Can take electrician/professional help if you don't have electric drill machine, hammer etc. 6. Has option of vertical tilt 7. Has option to change the horizontal angle: rotate TV for comfortable viewing Con: 1. The supplied spanner does not fit wall mount screws. I could use wrench to tighten the screws. 2. For Samsung curved TV (55"), the supplied bolt were either short or longer than required. However, you can easily find suitable bolt at local hardware shop. I had some and hence could finish the work. Others: 10mm drill bit may be bit lose, so use 8mm bit with some extra clearing on the periphery. (could not find exact technical word, but by hand movement, one can drill wider hole). At the time of drilling, precise marking will help. Better use the supplied template. Overall: 1. Good product, must go.

Superb mount. I have three of them and they're all outstanding. Installation very easy, and supremely adjustable. I'm using them to support 75", 70" and 65" TV's and they're rock solid, yet make each TV feather light to adjust positions. Incredible value for what they do, HIGHLY recommended!

PRO: Staffa decisamente robusta e di ottima costruzione. E' dotata di ogni possibile regolazione e il sistema di aggancio è molto ben congegnato. CONTRO: Attenzione: non è detto che sia adatta a tutti i TV perché la disposizione dei fori non è universale (per usarla con un LG 60UJ634V 60" UHD abbiamo dovuto modificarla con un flessibile) La piastra a muro è molto larga e un TV piccolo (32") potrebbe non riuscire a nasconderla completamente. Noi siamo un po' al limite con il 60"...