LARGE PVC PIPE CUTTER (IMPROVED BLADE)

Will never saw less than 2-1/2 in pvc pipe again. This saved me so much effort & time. Worth every penny. Looks & feels of great quality & worked flawlessly. Highly recommend. I used it on 1-1/2 in pipe.

I received my PVC cutter today and immediately put it to use in repairing some PVC plumbing for my pool pump. It works really well and has no problem cutting through 1 1/2" Sch. 40 PVC. It's made from nicely finished, sturdy metal and the blade is razor sharp. 5 stars from me on this. I practiced using it on some scrap pipe before I began the real work and have a couple of tips to pass along. First, don't get in a hurry. If you go cranking down on a cut, there's a chance you will crack at least some of the pipe in doing so (even at a balmy 78 degrees at my home). Go slowly, take your time and it will slice through the PVC easily. Second, when you have begun your cut and the blade is barely into the PVC, hold the cutter in place and spin it around the circumference of the pipe as far as you can while trying to keep a straight line all the way around. This will establish a small starter cut around the pipe that weakens it slightly in that area so that if the pipe does crack during the cut, it will likely crack along that small starter cut instead of at whatever point happens to be weakest in the pipe at the time.

Like the pipe cutter and would get 5 stars but the pin kept falling out. Replaced with a bolt and nut and now no issues.

This is an AWESOME tool!! If you've ever worked with PVC pipe, no more cutting with a saw! No more burred or uneven ends! I did a DIY project to make a swim platform for the pool (see photo) this made it so easy. Straight, even cuts in no time at all. Even cutting PVC at one inch was not a problem.

It was good and working as intended

I have used this cutter least a dozen times on 2" PVC and it has yet to cut at a right angle to the pipe. There is a lot of play in the cutting blade that allows the it to drift off center when about 1/8 of the way through. Once the cut is off, there's no correcting it. I have tried using the tool in a few different ways with no improvement in accuracy. The cut is clean, there are no burrs to clean up afterwards but what good is it when the result isn't a square cut?

This thing cuts 1 and 1.5 schedule 40 pretty effortlessly. It’s easy to make a nice straight cut with no burrs or cracks. The blade is fully replaceable so I expect to have this thing for some time.

I bought this because I needed a a pipe cutter for 2 inch Schedule 40 PVC pipe and I wanted a blade that was beveled on both sides (thinking that would help make square cuts. Unfortunately, the blade is not flat and the bevel is not ground symmetrically. The combination puts the center of the blade off to one side and it’s impossible to make a square cut. The extra rim around the outside edge of the jaws makes it difficult to check if the jaws are square. I suspect they’re not. I’ll have to flatten and fix the bevel of the blade to make this thing usable. I wish I had bought a higher quality tool.

Premesso che, a causa del mio lavoro da manutentore, ero alla ricerca di una pinza taglia tubi in PVC e plastica da 63 mm; Vista la premessa e dopo diversi giorni di ricerca, di confronto con diversi prodotti e convinto dalle recensioni positive ho acquistato il taglia tubi LIBRATON (diametro (63 mm) 2-1/2” ; PACKING Il taglia tubi è arrivato nella sua confezione originale in cartone e minimal; Una volta aperto il pacco, la sensazione è stata quella di avere un prodotto di qualità, robusto e ben fatto; All'interno del pacco erano presenti solamente le pinze con l'imballaggio per non danneggiare il prodotto; CARATTERISTICHE • Produttore: LIBRATON • Dimensioni della confezione: 27.5 x 11.8 x 3.7 cm; 730 grammi • Peso articolo 730 g Prima di tutto parliamo dell'estetica: il taglia tubi si presentano con un design minimale ma funzionale, di colore blu e la lama di colore nero; All’estremità è presente una impugnazione rivestita con della resina sintetica che consente una presa migliore durante il loro utilizzo, inoltre il taglia tubi si presenta con un ampio raggio in quanto può tagliare tubi con un raggio di 63 mm esterno; Oltre a ciò lo strumento è dotato di un sistema a cricchetto che consente di eseguire facilmente il lavoro di taglio con una mano Dopo la vendita la casa viene offerta una garanzia di 12 mesi ed inoltre la casa produttrice offre un servizio di assistenza per rispondere alle eventuali domanda nel giro di 1 giorno; CONCLUSIONI Il prezzo è di 25,99 € on la possibilità di usufruire di uno sconto del 10 % tramite COUPON al momento dell’aggiunta al carrello; Per l'esperienza personale la consiglio vivamente in quanto permette di tagliare i tubi in maniera veloce ed inoltre è molto semplice da usare;

Schnelle Lieferung perfektes Werkzeug

Does not cut straight. All these tools are useless, just use the grinding tool!

Bon matériel, je recommande

Para el precio y la funcionalidad, yo diría que es la mejor herramienta de fontanería que he comprado hasta ahora en Amazon, es versátil ocupa poco espacio, y es capaz de cortar tubería de pvc rígida de hasta 10 bares, (cosa que no recomiendo hacer muy frecuentemente, porque no están preparadas para eso) y tienen unos ligeros defectos, a veces la apertura se encasquilla y la hoja se puede llegar a combar un poco si cortas a lo loco, pero quitando todo eso yo sigo manteniendo que son perfectas, (rápidas, cómodas, con un tamaño perfecto, y capaces de cortar el 90% por ciento de todas las tuberias de la industria hoy en día sin problema alguno, Pex, multicapa, niron o ppr, PE, Plastico, mepla, pvc rígido e hidrotubo, etc en definitiva, por el precio y comodidad yo le doy un 5 y muy muy merecido