SuperFlex 3D Printer Resin, Softness 80A Simulating Flexible Rubber, Made in Korea by 3DMaterials (500g, Clear)

The resin is flexible and durable. This is a good quality resin for the paid price. The material is flexible and durable, I have used it in a conventional UV LCD screen 3d printer and I have had good results. The printed Orta have a good quality, with a white bluish finish. The best part is that is flexible, it is not stretchable as a silicone or rubber, but is great for the application and to prototype rubber like parts. The resin viscosity is low and very oily, not sticky, and after printing, only cleaned the part with ipA and no post curing required. The quality of the resin and the parts are great , with a nice surface finish and great detail.

This resin is perfect for printing flexible, rubber-like parts. The 80A softness gives just the right amount of flexibility without being too soft or brittle. Prints come out with great detail and durability. Cures well and is easy to work with. Highly recommend for anyone needing high-quality flexible resin!

Brilliant, BRILLIANT resin. It's a tad more flexible than TPU - and works really well as an additive to other resin types to change attributes. I was worried being a flex that it'd simply pull off the plate, but with the supplied settings my designs stick gas, velaned up really well and only needed a short sesh of post cure.

Highly flexible prints like rubber and half the price of its rivals

Good hard rubber like material. Quite stiff, but definitely a rubber like flex. If you clean in IPA and cure it does go very frosty. I found that if I dipped the part in the vat after removing from the tray, then blow off the excess with an air gun, then put in a glass jar full of water and cured in the UV chamber it retained a good transparency. I may give the 60a version a try to see if it is more silicone-like.

Interesting material. First tested a bit by pouring a thin layer into a paper cup and stuck it under the curing light - the result was pretty firm, much like an old souvenir-type pencil eraser. Held its bent shape for a few seconds before slowly returning to original. It also took on a yellowish colouration. After printing and post-curing however, the result has significantly more flex. It’s more like a rubber pencil eraser. Any section less than about 5mm thick will be very flexible. Not floppy, it holds its shape, but it deforms very easily. The result is clear with a very slight white/blue haze. The uncured resin is very thin so it’s easy to work with and clean up. It runs right off the FEP sheet like water on hydrophobic glass! Wish all resins did that. The low viscosity also makes it quick to wash in alcohol. Beware of thin film forming where the LCD was dark, as the tiny bit of light that does leak through is enough to gel the resin and this leaves some snot-like dangly bits especially on overhangs. I think I’ll save this for when I need a compliant part, like say a replacement for a silicone/rubber seal.

Harz in gewohnter Qualität, wie in den 1kg Flaschen , aber nur 500gr Auf dem elegoo mars2 und dem anycubic Photon Mono x....und nachdem testen und Zeit Anpassen keinerlei Probleme.... Auf dem Mars2 waren die bodenbelichtungs Zeiten wie empfohlen zu lang...2 den weniger min.! Hält wie der der 😈...lediglich genügend Supports sollten gesetzt werden 🤣

Me ha gustado no es tanto el olor como lo pensaba y cumple en calidda

I recently had the opportunity to use the Superflex 3D Printer Resin, and I must say, it has been an absolute game-changer for my 3D printing projects. Before discovering Superflex, I was struggling with issues related to the AnyCubic water wash resin. My prints were frequently breaking apart, leading to frustration and wasted materials. The introduction of Superflex 3D Printer Resin into my workflow marked a significant turning point. This resin, boasting a softness of 80A simulating flexible rubber, provided the durability and flexibility I desperately needed. The difference was noticeable right from the first print. The prints were not only more resilient but also maintained excellent detail and accuracy. One of the standout features of this resin is its remarkable flexibility. It simulates rubber-like properties, which is perfect for applications where elasticity and bendability are crucial. This feature opened up new possibilities for my projects, allowing me to experiment with designs that I previously thought were out of reach due to material limitations. Moreover, the compatibility and ease of use of the Superflex resin are commendable. It seamlessly integrated into my existing setup without requiring any significant adjustments. This was particularly important for me, as it saved time and allowed me to focus more on creativity and less on troubleshooting. I also appreciate that this resin is made in Korea, which assures a certain level of quality and consistency. The prints come out looking professional, with a smooth finish and a robust structure that withstands handling and usage. In conclusion, the Superflex 3D Printer Resin is a superior product, especially for those looking to enhance the flexibility and durability of their prints. It not only solved my issues with the AnyCubic water wash resin but also elevated the quality of my work. Whether you are a hobbyist or a professional, I highly recommend this resin for anyone looking to expand their 3D printing capabilities.

Es bastante flexible, con una flexibilidad parecida a la del filamento de TPU, aunque no regresa tan rápido a su forma original como el TPU. No soporta mucho la temperatura y se quiebra, pero a temperatura normal funciona muy bien. El precio estaba excelente para una resina flexible, pero ya lo elevaron bastante, al menos en México, así que no se si la vuelva a comprar

La prima resina flessibile che provo. Il prodotto senza dubbio mi ha stupito per la semplicità d'uso e l'efficacia dei risultati ottenuti. Ho provato in primis a stampare una forma dove colerò poi altra resina epossidica a riempire. Dettagli fantastici e una morbidezza che non mi aspettavo, ma i pezzi prodotti, anche se compressi tornano sempre alla forma originale. Le istruzioni nella confezione sono complete e ben redatte, divise per stampante in modo da non poter sbagliare i parametri. Seguendole alla lettera tutto va a buon fine. Stampe ok dalla prima all'ultima senza fallimenti dovuti alla resina. Il prodotto ha una consistenza molto fluida e appena uscite dalla stampante le creazioni sono anche piuttosto trasparenti, senza effetto giallino.. non so ancora nel tempo come e se cambieranno ma per ora promette bene. Facile da lavare con il consueto alcol, le stampe si staccano dai supporti facilmente e senza danni. Altra cosa fantastica, la resina una volta finito di stampare cola via dalla vasca della stampante lasciando solo poche gocce (io uso Nfep.. è giusto dirlo), molto meglio rispetto a tutte le altre che ho provato. Tempi di cura bassissimi.. nell'ordine dei 5 secondi per i primi layers e intorno a 1,7 - 2 secondi o poco più per i successivi, a seconda dello spessore scelto (con stampante mono). Che dire. Prezzo nella media, qualità eccellente, istruzioni ben fatte, ottimo packaging. Non potrebbe essere meglio. Penso a questo punto che comprerò anche le altre resine dello stesso brand.. come si dice.. se tanto mi dà tanto!! Consigliatissima per chi ha bisogno di realizzare pezzi in gomma!