LightDims White Dims Dimming/Softening Sheets for Harsh LED Lights 8"x10.5" Size (1 Sheet) Neutral Color & (1 Sheet) of Free Mystery Gift. Packaging May Vary

Works as advertised. My lighting was too bright and this really did the job.

Worked great to dim the LED light that came on our Hampton Bay ceiling fan. It was borderline blinding to look at before the sticker and now it’s a soft white. Easy to apply and the few ripples that remained don’t impact the light.

works really well, Adhesive quality is perfect, sticky enough to get on fixture and rub out air bubbles, but easy enough to remove if a re-due is needed. I put two layers over my painfully bight LED fixture and this seems to do the trick. Will recommend, will buy again as I am forced to add LED fixtures to my space.

One sheet was all we needed for our 29’ travel trailer. Just pop the light covers off your led lights, tape a small piece that covers all the bulbs. You don’t have to worry about wrinkles or cutting straight lines because when you put the covers back on it hides all that. They provided a beautiful ambiance in our TT for 2 years of full-time living while still being bright enough to feel like the room was lit. When we traded our trailer in to upgrade, take the covers off and tue tape peels right off with zero trouble or residue. One of the most impactful yet easiest upgrades we made to our RV and it was completely reversible when we were ready to move on. Highly recommended.

Very disappointed with my purchase. Complete disaster. It arrived with no instructions, not even any cardboard backing to keep the sheets from rolling up. It was literally impossible to apply the sheets without any wrinkles, which could be seen right through the light fixture. This problem was exacerbated by the fact that the light fixture had a curved surface. Completely unusable, just ended up replacing the light fixture with a smaller one that wasn't as bright. Don't waste your money!!!

Overpriced for 2 pieces of 8.5x11 paper that easily rips. Works ok, does dim the bright LED lights somewhat. Not a terrible product, but could be a lot better!

This product does what it says. I have an outdoor fixture that goes on at dusk and off at dawn. After I had it installed I found that it was so bright that - not I couldn't look at it - I couldn't face it! I researched and found this great dimmer. Simple yet so effective. I just cut the sheet to approximately the size of the bulb and peeled the sticker off and applied it to the light. Then I trimmed it with a razor so it was exact. Same as you would use a label - just peel and stick. Now it's bright, but I can look the bulb right in the eye. I would highly recommend this product for a LED fixture.

This sheet is much more translucent than the smaller sheets that I tried. https://www.amazon.com/dp/B0BLSHG6CS?ref=ppx_yo2ov_dt_b_product_details&th=1 On a ceiling LED fixture it dims a good bit and still maintains the warm white color. Not at all yellowish like the small sheets. Would be 5 stars, but really expensive for one 81/2 x 11 sheet.

Bin enttäuscht von dem Ergebnis.

Very easy to use, and install. Didn’t alter the color of the light, but seriously dimmed it : perfect ! Lightning fast shipping, neatly packed ! Would give 10 stars if I could! Thank you so much!

You think for what they are that they are a trifle expensive for a sheet of A4 but not really. There is nothing much like this on the market and they are really important especially when you consider that they will cover an awful lot of LED excess. You find when you use them that they really soften the sharpness that you get from LED lights especially on devices. I used them on my Casio Celviano AP450 piano because the display panel has very sharp red lights and the leds are on the buttons themselves; these did the job. I also used them on my router which had a similar problem in green. They will progressively reduce the light intensity and especially if you apply more than one though in my case one was enough. Be careful of the edging that enables you to separate the backing from the film because if you cut it so the edging is not there you then have to separate the two and don't have an edge to do it, so then you need to separate the two with a couple of pieces of bluetack to pull them apart. We need more products and policies that deal with light pollution and more and more places are getting dark skies policy these days but on a highly local and personal basis it also affects your circadian rhythm - the ability to trigger going to sleep when small lights are on and can't be switched off for one reason or another e.g. if you switch off a router it registers as a fault at the exchange in the UK, if you hide the light of the router you can't see what is happening. I'm glad I bought a couple of sheets though they also do the blackout dots as well and at some point I might go for those though I do want to know whether something is on or not and taking up watts of unreasonable consumption.

It is very useful because my led is not so bright anymore.

Perfecto!!