SVS SoundPath Tri-Band Wireless Audio Adapter

Was unsure if this would work for me, given the mixed reviews floating around when using without line of sight. Went for this triband version to hopefully avoid the issues mentioned on the lower down older dual band, not tri model. Had to fit this after our electrician and builder forgot to fit a LFE cable from our central comms cupboard to the lounge. Couldn't easily run a cable. Needed wireless Setup dead easy, plug and play. installed transmitter into amp behind a block/concrete wall . The receiver on the other side. 0 issues, great connection, great sound (using for subwoofer), no lag or delay or sync issues. This is expensive, but better to buy once than buy those cheaper Chinese ones. Unboxing experience also good. Defiantly has a quality feel to it. I cant guarantee it will work for your scenario, but it certainly does not need line of sight to work, and for me works well through a solid wall, and numerous other wifi boosters, and wifi devices in the area.

Signal from transmitter to receiver is faultless so far, very pleased with it. Only issue is that the power & RCA cables are very short. Particularly the power cables. Not much use unless you are right next to a socket or using an extension lead, so I had to use longer one that I had from another gadget. Also RCA Lead was ok for me as I only have a small subwoofer, but if you have a larger woofer & the connection is not near the top, the cable isn’t long enough to sit the receiver on top of the subwoofer. Has to lose a star for the length of the cables, but other than that works perfectly 👍🏻

This product is absurdly priced. Truly it is one of the cheapest looking pieces of kit I own. But it gets good reviews and looked like a good choice for reliability and performance. I haven't been dissapointed yet. Set up is simplicity itself and so far (2 days) it's been flawless listening. The device will power off the USB on my AMP so it comes on and off with it and the paired unit uses th eplug USB adapter which Alexa controls through a Wifi 4 gang. I just wanted to move my Sub from a cabinet that vibrated to a newly built wall recess behind our sofa and this has enabled me to do it without any cable runs. But seriously? £200?

This wireless adapter works very well to transmit audio signals from pre-out of receiver to other side of room. I experimented with the range. Found that it works flawlessly in same room. From different rooms there were some dropouts of sound. Used for full range signal to rear surround amplified via an older but functional Crown xls amp. Frequency response on Polk surround speakers as good or better than from direct wired connection to RZ-50. Provided a stronger more present surround experience. Obviously works flawlessly for SB 1000 pro's as well, but decided not to place subs on rear wall of room.

Works perfectly

Macht das was er soll. Perfekt wegen Tri-Band. Keine Aussetzer. Preis ist etwas teurer aber die Qualität ist sehr gut.

If you’ve used other wireless speaker adapters you may have experienced wifi issues once they’re plugged in. I have been struggling for years with my subwoofer since it always killed wifi in the general area for all my IOT devices. This completely fixes that issue. Pricey but definitely worth it.

Niet iedereen heeft de mogelijkheid om een subwoofer te bekabelen en in zo'n geval biedt de SVS Soundpath een draadloze oplossing die feilloos werkt en eenvoudig te installeren is. De transmitter aan de AV receiver zijde installeren op de LFE uitgang (bestaande of bijgeleverde RCA naar de Soundpath transmitter) en op de sub het bijgeleverde RCA'tje van deSoundpath receiver met een van de 4 inputs verbinden. Heb je een recente SVS sub dan zit daar een powered USB type A poort op waarmee je de Soundpath receiver van stroom kan voorzien, zo niet gebruik je een van de twee bijgeleverde power adapters. Bijkomend voordeel van de Soundpath is dat dit een triband oplossing is waardoor je steeds de meest optimale verbinding hebt en storingen met andere bestaande draadloze oplossingen vermijdt of in het allerslechtste geval minimaliseert. De 3 banden bevinden zich in het volgende frequentie spectrum: Band 1: 2400-2483.5MHz Band 2: 5150-5250MHz Band 3: 5725-5875MHz Dankzij de bijgeleverde velcro pads kan je Soundpath receiver en transmitter makkelijk bevestigen en/of wegwerken. De volledige installatie nam niet meer dan een paar minuutjews in beslag.