Protable Bench Multimeter with 3.5 Inch 55,000 Counts True RMS Ultra-light Digital Multi Tester for Labs, Factories (XMD1041)

Works really well. Sturdy build.

This is a nice edition to my home electronic workshop. Easy to read with a large display. It has an option for reaction speed to testing. Worth the money

For a budget introductory multimeter this meter is very accurate and has many useful functions. Using the meter is a pleasure with the very clear display and intuitive layout of the buttons, It is well built and has proven to be a valuable piece of kit and I would recommend it to any one getting started in electronics or indeed been in the trade for a very long time.

The power on switch apppears to be software recognised and one needs to hold the switch in at least five seconds to power device. A quick on off push will not power the device And it will be assumed faulty.

Been looking for a 50,000+ count benchtop DMM for a while - this one filled my needs perfectly. Very compact - it reads very accurately against met Brymen BM867S, and the downloaded interface software works fine (although you need to cocnnect via the RS232 over USB option rather than just USB) . So impressed thet I have also bought an XDM1241 as well (the battery powered version - which you can run from ant USB power source) just for variety

Not the fastest meter and did not have a temperature probe does not do Pico farad range capacitor but overall a good meter

It’s looks really cute, the display’s good, the interface intuitive, and it works well. I’m actually quite smitten, I like it so much. But there’s some flaws… Unless you are a god of the laboratory, occasionally, you might accidentally blow one of the fuses on the current-range inputs. On a well designed instrument these fuses are easily accessible but not here, you have to undo all the screws and split the whole cabinet open to reach the fuses. Still on the subject of current range protection fuses, as on any DMM, these need to meet high specs and are never cheap to replace. Don’t be misled by the ‘spare fuse’ that ships with the device. It’s not the generous gift that’s enclosed with some other brands, it’s just a spare for the mains input fuse. The probes that come with it are pretty basic. Functional and probably safe, but think ‘pound shop’. I’ve other (spare) probes I can use but otherwise, I’d be wanting to upgrade. The mains lead IEC connector is straight so when attached, the stiff cable more than doubles the overall depth required on a workbench. I’ll probably be replacing it with a right angled lead but that’ll add a significant few ££ to the initial cost.

It's good value for money as a bench multimeter and testing against other known sources is accurate. It could do with some better rubber feet to stop it sliding about when operating the buttons. I have to hold it in place with my other hand when changing settings which is a bit irritating when in the middle of working on a complex circuit on the bench. That said, it has been a really useful addition to my electronics lab.

Me gusta. Bien presentado y funciona según especificado. El manual (Creo que lo bajé de la red) es muy claro y en español.

Messo subito in uso nel mio laboratorio. Ottimo multimetro in grado di misurare tensione, corrente, capacità, trigger abbastanza veloce. Confrontato con uno strumento più performante, non ha affatto sfigurato. Consigliato.

Je l'ai fixé sous une étagère via des flasques imprimées 3d trouvées sur thingiverse. Faire parfaitement le job attendu. La sonde de température n'est pas fourni et c'est dommage. Je galère un peu pour trouver le modèle adaptée. Le capacimètre est un peu lent mais fonctionne parfaitement.

Top ich kann es wirklich empfehlen, super um Fehler bei der PS5 einzugrenzen bzw. zu finden es ich einfach zu bedienen

Para el precio que tiene va muy bien para su uso en casa con pequeños de electrónica y reparación.