Chanzon Tact Switch Tactile Push Button Micro Momentary Switch 6x6 mm x 6mm 2 pin 20 pcs Pushbutton Switches Breadboard Electronic Circuit Arduino PCB Dip Touch Switch Mini Buttons Electronics Board

I’m love making small electronic projects. This small product worked very well in a few of my experimental projects.

I thought I was going to have to replace my 23 year old whirlpool duet washer. I thought that the control board was going out since we could no longer get the washer to start with out pushing start button several times. You can not get replacement parts like the control panel. I thought I would try to figure out what was wrong with the washer. After inspecting the control panel I did not see any physical damage to the panels. I decided to jumping across the push button switches on the control panel. The panel responded like normal when jumping across the switches So I bought these little jewels and replaced nine push buttons on the washer and the washer works like new again. Total saving probably $1992.00. Only down fall was I bought the taller buttons but I was able to take my drimmal and shave the plastic button down to a height that worked.

These buttons have a nice click, no bouncing issues I can detect, and they seem durable. I have been using it in a homemade CW (Morse code) keyer and it's held up so far. I like that these have 2 pins instead of 4 because it is slightly more compact and 4 is unnecessary. The leads are long enough for most half decent breadboards.

I have a Westpoint Stevens Restwarmer Electric Blanket were the controllers have failed. The failure started with one controller and after thee months the second controller failed. I googled the 100R E226070 from the product label but Westpoint Stevens has closed and the only 100R controllers I can find are ones per-owned on eBay. Since the second controller to fail had become hard to turn on with the momentary push-button rocker switch requiring multiple presses before it would turn on, I decided to open the controller and see if I can identify the problem. After finding the hidden screw beneath the product label, I removed the screw and was able to open the controller case. Using my Ohm meter, I found that both switches were open. I de-soldered both switches and measured their dimensions then searched Amazon and found the Chanzon Tactile Tact Push Button Switch 6x6 x4.3mm to be nearly identical to the buttons in the 100R controller. I ordered the 20 pc pack and when they arrived, I installed two of the switches in the 100R controller. Problem fixed.

1999 Lexus LX 470 Climate Control panel switch replacement. Replaced the old nonfunctional or worn-out switches with these once. Work like a charm. Sure, it does not feel rubbery or elegant to the touch as the original rubber cover will not fit but it works now. Excellent replacement. Good luck finding or getting the original parts. This is a bargain fix and replacement.

I like the fact that is small enough for small units, I also like the delivery time frame, very fast, I use some on flash light and on a self defence item

Bought an old Sega Pico for my son off of eBay. It was untested but looked good, and I felt confident I could troubleshoot any issues. Sure enough, the pen, which is integral to the device didn't work. The issue was a microswitch, which after 25+ years, called it quits. Problem was, it was a semi-unique design with longer legs than I was finding on most replacement microswitches. I bought and returned a couple microswitches until I finally landed on these. I was able to trim the legs and solder them in, and the unit works great! Plus I have a bunch of extras when my kid breaks it again.

I use these for small projects I repair or build. They were the perfect size and seem to function well. I have used these for several projects now and none have failed yet.

The buttons took around a month to come in, which was longer than advertised. When they did come in, they were exactly as advertised and worked as expected.

Beau, bon, pas chère

Muy buen producto recomendable al 100%

EXCELLENT MERCI

Great little switches for diecast car hobbyist.