3DMakerWorld Flexion Retrofit Kit for Dual Extruder

Description

Developed by the inventor of NinjaflexFlexible filament extruder retrofit kit for both left and right sides of a dual-extruder printer. Print fast with flexible materials, higher resolution, and fewer failures. Also prints ABS and PLA better than your stock extruder.3D printer extruderRetrofit kit for dual-extruder direct-drive machines, such as the Flashforge Creator Pro, QiDi Tech, Powerspec Ultra, CTC Dual Extruder, and Makerbot Replicator 2X. The Flexion extruder will allow full-speed printing of flexible filaments and improved accuracy printing with PLA and ABS. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control of feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works will with Ninjaflex, Filaflex, flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA.The Flexion Extruder uses a high-stiffness lever to compress the filament. The compression is controlled with a cam and an adjust screw, rather than the traditional spring. This allows more tension and more precise control of the tension. To learn more about the benefits and drawbacks of this system.This kit requires you to disassemble your printer’s extruder and reinstall this upgrade.Additional informationWeight : - 1 ozWorks with : - Flashforge Creator, Monoprice Dual, Dremel, Wanhao 4S, Powerspec Ultra, CTC Dual Extruder, and many othersIncludes Mounting block 2x Tensioning arm with idler and cleaning brush (one right and one left) 2x Adjustment cam 2x Drive gear 2x Feed barrel 2x Heater block 2x Insulation for heater block