Late 2013-2019 Magneride Bypass Kit

This Magnaride strut bypass kit works exactly like it should. After replacing badly worn struts with some aftermarket struts, I got a "service suspension" light. The replacement struts had plug in sockets that connected to my original harness, but it still coded. I recalibrated ride height, and reset codes several times with the solution not lasting more than two drive cycles. (My old struts did not throw a message). I installed just one set in just the front. So two sets to completely eliminate Magnaride system. I did not do the rear, just the fronts. Instructions were very detailed, and the bypass installed easily, plug and play. It took me about a half hour, but I did not take the tires off.

I had the magnetic suspension removed and the shop added a bypass that was supposed to do the same thing that these do. I purchased these when I was getting a constant warning light about the suspension not working properly. I replaced one at a time and it fixed the problem after the second try. Worked great no issues and easy to install.

Worked great. No lights or issues with deleting the magnaride on my escalade

Pleased to see that these were made by hands of American vets. Plug and play, very straightforward

I URGENTLY NEED IT TO REPLACE THIS PART AND I WAS SENT ONE THAT DOES NOT FIT THE PLUG. IT CLEARLY NOTED THAT IT WOULD FIT A 2013 EXT AND IT COST MORE THAN THE 2012 OR LOWER MODEL, SO I PAID FOR THE 2013 AND IT DDIDNT FIT, MY CUSTOMER TOOK A PLANE FROM NEW YORK AND PLANNED ON DRIVING HOME. I HAD TO DISCOUNT THE VEHICLE 600 DOLLARS AND PAID FOR AN EXTRA HOTEL DAY.

Have a 2018 GMC Sierra Denali 1500. The longer “dumby” fuses worked perfect. I bought cheaper shocks that weren’t magneride and bypassed the computer. No lights on dash. A wire to a shock is so stupid. For anyone reading this that has a vehicle similar to mine you don’t need the ride height sensor part of this (the smaller ones). You just need the longer ones and you can buy just those for like 55 bucks.

For some reason I get a code for rear shocks from time to time . The did fit well and look well made . I have not called the company to try to resolve issue .

Worked perfect on my 2018 GMC Sierra Denali. Easy install and was compatible. Plugged in my scan tool after the install, cleared the codes and everything works as intended. No more service suspension alarm and truck goes over 85 MPH again.

I installed this MagneRide delete kit on my 2018 Camaro SS after switching to standard shocks, and it worked exactly as promised. The front and rear plugs fit perfectly once I located the correct connectors, and all the suspension errors cleared immediately. The car now drives smooth, no more limiter issues, and everything feels stock again. Great quality build, easy installation, and a real lifesaver for anyone deleting MagRide. Highly recommended!

Installed on 2018 gmc Sierra Denali 1500 with no issues besides having a hard time disconnecting the plugs from the sensors. Installed bilstein 4200s on the rear and purchased complete kyb shock assembly for the front. Performed suspension zero trim after and milliamp reading for each bypass module fluctuated from 10 to -10. Truck is very smooth now.

Not compatible with the 2016 Sierra Denali...it is compatible with the air ride system, not the MagnaRide system.

Worked perfect with Yukon to delete the check engine light and get suspension light out.

Followed instructions and the service suspension message is gone.