Mini Tower Kit for Raspberry Pi, Pi 4 Case with ICE Tower Cooler, 0.96'' OLED Module, RGB Cooling Fan, Heatsink,GPIO 1 to 2 Expansion Boardfor Raspberry Pi 4B

It's a good raspberry pi case. Keeps the little thing nice and cool, and it looks good too.

Good solid enclosure with cooling. I've used it about 2 years now in a development environment. Protects the rPi from the mess which often occurs on my work bench.

great case easy to assemble, but one sort of issue, so they include a gpio splitter and thats great it allows you to right angle the gpio out of the case so you can still use it, the one thing they didnt account for is the extra length of the cord when using the splitter so if you decide to use it the wire no longer fits in the guides along side the case causing you to have to leave it hanging though the case right above the fan and makes it look sloppy, also with their included screw driver your just as likely to strip a screw as you are to drive it in, my advise use a different one

I've been running Octoprint on a Raspberry Pi 4b. It worked, but my pi, which was in a simple plastic case without any cooling, would overheat hitting temps like 160f(~72c). This impacted performance and a whole slew of other issues. I grabbed one of of these mini cooler towers and my temps drops dramatically, now sitting around 95f(~35c). So yeah, this cooling tower is worth it, but if you want to leverage the Oled Display it's a bit more complicated, but don't be intimidated. One thing to note (at least with the unit I purchased); Some of the commands in the printed doc are out of date. This is easily resolved by navigating to the github repo you clone and following the new directions though, so don't give up.

LED screen and FAN RGB does not work on Kali, also never worked on Pi as well, LCD screen is so hot you can't even tough it

pretty cool case for an rpi, looks awesome, and works as advertised, a little bit of a technical setup, wiring looks fine and can fit into at least 1 of the clasps with 90 pin header adapter installed, instructions link to github repo w/ lots of pre-made displays such as sysinfo, space invaders, clock, and many more which is really cool, the display is not hot as someone previously mentioned

This case was great fun to put together and works great with my Raspberry Pi 4B. The cooling tower that comes with it does an awesome job, I have my Pi overclocked to 2 Ghz and it still idles at 28C and reaches 44C when running an all-cores 10 minute load test.

Missing pieces, no instructions - was already partially assembled so it must have been a return. This is my first pi, the instructional video seems like its on 2x and is hard to follow with many command lines entered without any voice or written instruction on screen to follow along. It didn't come with any screws that work for connecting the heatsink to the Pi or the Pi to the case either. It seems like it would be cool if I can get a new one. I ordered a replacement, will update review.

Kasa güzel ve pratik. Tek sorun üstündeki ekran ve ışıkları çalıştırabilmek için baya bir linux komut kullanmayı öğrenmek zorunda kalmanız. Bu iyi mi kötü mü, kişiye göre değişir. bence iyi :) Ayrıca internette aradığınızda fazlasıyla destek mevcut. Kendi siteleri de gayet açıklayıcı özellikle wiki sitesi. Genel anlamda tüm bu işlemleri başarıyla bitirince buraya yeni düzenleme yaparım. (halen tüm driverları indirmek ve kurmakla uğraşıyorum) kasanın dizaynı ile ilgili tek kusur bence SD kart takmanın zor oluşu. arkasında bırakılan boşluk kartı takmak için baya bir içerde kalıyor ve nedense bu boşluk fazlasıyla büyük bırakılmış.

Tengo mi respberry más fresca que nunca. Lo uso como servidor home assistant, y no suele pasar de 40 grados.

Eu un peu de misère à programmer la fonction lcd mais j'ai réussi malgré tout.

Einbau etwas fummelig! Display Einstellungen sowie Setup gehen aber dank guter Documentation (Manual) gut von Hand!!! Gut Verarbeitet und macht den RPI zum echten Mini-Tower!

Unit works well, instructions are not the best but you can work it out with a bit of IT knowledge. My only gripe is I have 2 of these and both fans have got really noisy within a year of use.