VCELINK Banana Plugs for Speaker Wire 6 Pairs/12 Pcs, 24K Gold Plated Dual-Screw Type Speaker Connector for Home Theater, Wall Plate, Audio/Video Receiver and Sound Systems (Red+Black)

These do just what they are supposed to: securely connect speakers to amp neatly and cleanly. With two setscrews to hold the wire they work with the advertised gauges easily. Just strip about 5/8” insulation, secure the set screws and slip the desired collar over the assembly. Done!!

These are so much better than the economy banana plugs I was using before. I got these mainly because I was a few units short of my needs, but also because in my new home, with a built-in set of theater speakers, my old plugs were very loose in the wall plug panel, but I hadn't had enough experience with banana plugs to know if this was normal or not. I chose this set because the plug appeared to be significantly fatter than the ones I had... of boy, was that true! Almost too snug. The only reason I give them a 4-star "very good" instead of a 5-star is because they were so tight that I almost felt like I was going to break the patch panel cover trying to get these in! But, thankfully, they didn't break anything and are now much more secure than I had before. These are also very easy to install. I like double-screw design that holds your speaker wire in two places, and the plug shroud appears very professional. I like them enough that I'm going to order some more so I can replace all of my original plugs with these, just surprised by how much effort they take to insert. [UPDATE: After buying my second pack of these, I've decided to upgrade my rating to the full 5-stars. These are great plugs, but yes, they are stiff, so insert with a little extra care.]

the 'operational video' is what convinced me that these plugs were a MUST. after stripping the cable to the specification & loosening the screws, fastening each plug to the cable was simple. the design of this product was carefully considered for the best product for the end user - me and you.

These work as expected. My only issue is the screw-on cover for the electrical connections tends to unscrew easily when plugging/unplugging the connector.

These are the best banana plugs I’ve bought yet. They fit perfectly into the speaker connections. Unlike the ones I purchased in the past these have not oxidized or gotten loose. These are easy to use and create a solid connection to the wire. Lastly, the price of these is very reasonable for the quality of the plugs.

Excellent quality, easy to work with. It’s never been an issue with me, but it is important to note that the outer collar Is conductive so you don’t want to let them touch, red and black together. This is the way that just about all these banana plugs are designed.

I have had this style of dual screw banana plug before and they're better than soldering. Usually the silver sleeves on these unscrew easily and come off to access the gold plug. These gold plugs didn't slide out from the sleeve. I finally discovered I needed to give a little push to pop the brass plug out. The plug being tight is a good thing as it ensures the cover is going to protect the ends of the plug where wires are inserted.

I had normally just run speaker wires directly into the back of my amplifier but my wife wanted me to clean up the mess. I installed a speaker wire wall plate into the wall and purchased these plugs to attach the speaker wires to the wall plate. Extremely easy to attach the speaker wires into the plug. Just need a standard wire stripper and a small screwdriver. Each Banana plug is color coded black or red for the positive/negative wire and each set can be stripped and attached in less than 5 minutes. Very sturdy and secure. Great value and great purchase.

I didn't need or want top shelf expensive plugs, neither did I want low quality cheap ones. These are what I consider to be mid - range and they work for me. I really like the double screw fastening, nice and secure.

QUALITY BANANA PLUGS AND EASY TO USE.

otimo

Poor quality and several broke when inserting speaker wires.

I was using bear wires before hand. These made resetting my speakers up after a move so much easier. They were easy to install with two grub screws fastening the end of the wire and a screw on collar to cover the screws.