Edward Tools Paddle Mixer 27” for 1/2” Power Drill - Industrial Paddle Mixer for Paint, Concrete, Drywall Compound and More - Speed Mixer Concrete Tool is Ideal Mixing Tool for 5 Gallon Bucket

This is an excellent quality tool for mixing thinset. Has a hex shaft of sturdy construction. Tool displays solid substantial welds and heavy gauge steel with a quality plating job. Tool runs true at speed and is well sized for use in a typical 5 Gal. plastic pickle bucket. Tool length puts an average man at a comfortable standing height when mixing with bucket on the ground. An ideal match for your typical 1/2" chuck 120vac powered 500-600ish RPM handheld drill from HF, this tool and that drill easily and quickly mixes a 50lb bag of thinset in the aforementioned 5 gallon bucket. It easily mixes a 50lb. batch in the 5/10/5 mixing window usually recommended by thinset manufacturers. Tool shape is formed so that it does not tear up the bucket either...a big plus IMO. Be smart and clean it off after each use. This will be a keeper tool, not one you use and toss.

I bought over 30 pieces of this mixer from time to time very good mixer love the product. Highly recommend recommended.

Paddle Mixer worked great for mixing drywall joint compound in 5 gallon bucket. I used a 6 amp 0-900 rpm maximum 1/2" power drill. You will have to "clamp" the 5 gallon bucket with your feet to prevent it from turning with the paddle. I looked at similar mixing paddles at Amazon and Home Depot, and all recommended a 1/2 power drill. One manufacturer recommended a 1/2" drill 6 Amp minimum and an 800 RPM maximum, and another recommended using a 1/2" power drill at Use at low speed 450-500 rpm. Notice in the product picture where the craftsman is mixing mud (drywall joint compound), he is using a 1/2" power drill. So do not buy this for mixing mud, if you only have a 3/8" power drill, as they are typically single gear reduction (higher RPM output), and will likely not have enough torque for mixing mud or concrete. For 3/8" power drills, a better choice is this Edward Tools Paint and Mud Mixer for drill in 1 to 5 gallon buckets - Fits all standard drills - Zinc plated steel - Reinforced weld - Hex head for non slip - Easy to clean - Paint mixer attachment for 1-5 gallons. I have seen these mix mud with a 3/8" power drill without straining the drill. Lastly I also took of one star as I got a cut on my thumb (which later got infected) :-( when cleaning the paddle mixer the first time, as it had some fairly sharp burrs. I would recommended inspecting the tool upon arrival, and round any sharp edges with a file. Overall, very satisfied with this paddle mixer for mixing joint compound with a 1/2" drill.

Loaned out my drill with my 20 year old paddle mixer. Guy broke and threw it away. This was a close copy and am pleased with its construction. Cut off about six inches of the shaft just as I had with the other to get the drill lower when mixing concrete in a five gallon bucket. Will work perfect as my previous on had for years. Used on thin set, mortar, concrete , paint. Need about a 450 rpm drill or less. AAA+++

I used this to mix concrete patching material (NewCrete) in a 5-gallon bucket. It did a great job mixing a even cleaning material off of the side of the bucket. It is very heavy duty and requires a powerful drill to spin it in concrete mix. Paint may be easier. I used my 1/2" Bosch Hammer Drill and it worked fine.

So far, I've used this paddle mixer to mix up about 20 buckets of mortar. Very impressed. Perfect size for 5 gallon bucket. Length of mixer is just right to allow average sized individual to stand fairly straight while mixing in a bucket. Using with a standard spade style drill and redi-mix mortar. Mixes batch as good as any paddle mixer I've used in past. Very sturdy construction, expect to last for years to come. Plating or finish is excellent, no signs of chipping or wear yet, and mortar rinses right off with hose during cleanup. Appears to be good value for the price.

This mixer fits very well into my 1/2" drill and worked great mixing various paints and sealants for my concrete pad. We used acryllic paints and sealants and it made my life so much easier than trying to stir by hand! If you have a big or small job to handle with a 5 gallon bucket, this is a beast. Clean up was easy with a garden hose while the paint was still wet. Great time saver and value.

Great, paddle mixer. Used it right away for a DIY custom concrete counter top install and it had no problems. Mixed up our concrete in 5 gallon buckets using the paddle with a heavy duty drill. The paddle is really sturdy and I am super pleased with it!

Very well built and good price. Perfect for 5 gallon pails of anything needing to be mixed like grout, pavement sealer etc. Have used multiple times now and very happy with the ruggedness of this paddle.

This is a great tool. Nice and solid. Will get the job done and won’t break. Highly recommend

Good length. Easy to clean. This is the second type/brand I tried and wow this is much better than the Dewalt one I had prior. Mixes super well and consistently and quick too.

GOOD PRICE. DID NOT TRY IT IT'S FOR A PRESENT.

Used for tile work, grout