Tiger X-Frame Keyboard Stand - Height Adjustable Single Braced

Very good basic rack. Very stable and cost effective. The item is also simple to construct, the instruction manual is probably superfluous at this point.

Arrives in a narrow box, parts wrapped in polythene bags inside. Assembly is easy. Open the X frame part and click into first hight position as it is easier to assemble that way. The bolts are supplied screwed in to each end so remove with supplied allen key. There are two feet pieces: they are asymmetric so before bolting in check which one goes on which side by resting in place first There are two top stand pieces: they are again asymmetric so before bolting in check which one goes on which side by resting in place first Very easy to adjust height/fold The feet end caps can be rotated to change height to prevent wobbles on uneven floors Mine nicely holds an 88key midi keyboard. Stable, firm stand.

Easy to assemble, height adjustable, fairly sturdy. Keyboard sits well on it. Good product.

I bought this for home use with my Alesis Q49 MIDI controller keyboard and it's pretty much the perfect size. You can move the four rubber grips on the top bars in towards the centre. The keyboard can sit between the grips, preventing it from moving, or on top of them, preventing it from sliding. With a little thought, the stand is simple to put together, though if you suffer from arthritis it might take several goes to unscrew the bolts then screw them back in once the feet and top bars are in place. When I first put it together the stand did sway around a little but I upended it and made sure the feet were as tight as possible, wiggling them as I used the allen key to make sure they bedded in as far as possible. Now it's as solid as you can expect on a living room carpet. With the height set midway (the third of 5 holes) it seems to be ideal for playing standing up, with the keys at 35" from the ground. On the lowest setting, it feels ideal for playing sitting on my rotary office chair, with the keys at 27" from the ground. The stand has only just arrived, though, so if it does get uncomfortable I'll come back and edit this review. The Q49 keyboard is 32" wide and it fits on the stand with about 1/2" to spare at either end. This could be useful information if you're thinking of using it with a different 49-key keyboard - one with less than full-sized keys, for example. The depth of the Q49 is a little under 7.5" and the stand is 13" deep, so this leaves about 3" in front of and behind the Q49. The next model up, the QX49, is 9" deep so, again, there's plenty of room. This is a very good stand for the price, in my opinion. But there is one drawback. As I understand it, if you want to fit an extension stand for a second keyboard you would need to remove the ends of the top bars in order to push the bottom of the extension into the holes. But the top bars of this stand seem to be solidly plugged with non-removable plastic caps. The rubber feet on the stand, however, are removable, so it might be possible to place the stand upside down, remove the two feet at the back and fit the extention that way. But then you'd lose some of the stability of the stand, and the rubber grips would no longer hold the keyboard in place as the feet don't slide in and out and can't substitute as grips. And, yes, I did check that I put the stand together the right way up with the long feet at the bottom and the shorter arms with the grips at the top. To be fair, it does say, "Keyboard extension arms cannot be added to this stands" [sic] on the product page, but I've only just seen this after a closer look. I wish that it had been in a more prominent place. However, as the stand is good value for the price, I've given it the full 5 stars.

Was really surprised by how good this stand was for the price. Easy to put together, sturdy, lightweight. Takes a full size 88 key digital piano effortlessly.

Sturdy stand that has a range of heights adjusted by a spring loaded knob. Easy to set the correct height. Adjustable rubber cushion pads to fit your keyboard. Made to last, great price and speedy delivery. No instructions (but it's pretty self explanatory) and I had the "little beads" issue too as reported by another buyer so keep the hoover handy when you open the box.... :)

The spring keeping the pressure on the screw failed and disappeared down the hollow leg ! No response when I sent a message very disappointing

Bought this stand for my daughter so was very excited to get it assembled. However, the instructions were absolutely useless. I ended up having to fiddle around and using logic sense. What should have taken 5 mins actually took me about 15 minutes. Then I realised that the screw hole in one of the stand is actually a little bigger than the others - the screw couldn’t tightened properly and thus, after a short while, the leg that is screwed to that stand becomes loose and starts to wobble. It’s such an utter drag having to return it, as I need a printer (which I don’t have) to print the label but there doesn’t seem to be an alternative option, so I’m now having to seek another solution to fix this big screw hole. The company ought to be more stringent with their quality control and Amazon should have an easier “return” process for customers who do not have a printer.