VONFORN Paint Sprayer, 700W HVLP Spray Gun with Cleaning & Blowing Joints, 4 Nozzles and 3 Patterns, Easy to Clean, for Furniture, Cabinets, Fence, Walls, Door, Garden Chairs etc. VF803 Yellow

I’m really impressed with this paint sprayer. It was easy to assemble right out of the box and very user-friendly, even for someone who isn’t a professional painter. The spray patterns are adjustable, which made it simple to get an even, smooth finish on different surfaces. The motor is powerful and consistent, and it handled paint well without clogging as long as it was properly thinned. Cleanup was also much easier than I expected, which is a huge plus. It saved me a lot of time compared to using brushes or rollers and gave my project a more professional-looking result. Overall, this is an excellent value for the price and a great tool for home improvement or DIY projects. I would definitely recommend it to anyone looking for a reliable paint sprayer.

I was a little intimidated to use a paint sprayer at first, but this one is actually very beginner-friendly. Once you get the hang of it, it makes painting so much faster compared to brushes or rollers. The finish came out smooth and even, especially on larger surfaces. I liked that it comes with different nozzle options depending on what you’re working on. Cleaning does take a bit of time, so be prepared for that, but it’s worth it for the results. Great option if you’re doing DIY projects and want a more professional-looking finish.

I've used and owned other hvlp and airless sprayers before, and I am surprisingly impressed with this one, for the price. I was concerned that you can't adjust the airflow, only the fluid amount but after using it, I found that this wasn't an issue anyway. I sprayed 30 year old, painted, kitchen cabinets that had been lightly sanded and it came out as smooth as you can expect for older cabinet doors that weren't in great shape. At first, I sprayed the primer (Behr cabinet and trim primer) a little too thin. I was worried about going to heavy and getting drips and runs. but it turns out that I could have gone heavier. Then I did two coats of Sherwin Williams Emerald trim paint, alkyd enamel water-based paint. Again, the first coat was probably a little lighter than necessary but by time I put on the second coat, I did go slower to get a heavier spray and it covered very well with no runs. I did have the cabinet doors laying flat, not hanging though so that might have helped the pain level out. The paint does need to be thinned considerably. The manufacturer recommends no more than 1/2 pint of water per gallon -- I'm not sure what I used but it was closer to a 1/2 pint per quart, in order to get it thin enough. You must use the thinning funnel to test how long it takes for the paint to drain from it to make sure you have it thinned enough. I thinned it to about 50 seconds until the cup was empty. However, on the primer, I didn't thin it quite as much and the tip clogged up a couple of times and it spat out large drops of primer so had to thin it a little more. Be sure to practice if you've never used and hvlp sprayer before. Do some nice, even passes, overlapping the previous pass by 50%. Start the sprayer when it's pointed just OFF of the piece your painting and continue across and end off the other side of the piece. Do not start and stop it on the thing you're painting itself (unless it's very large, like a house or fence) otherwise it will get too heavy where you do the turn around. I'd recommend this for smaller projects: shutters, doors, garage door, cabinets, furniture, maybe a deck -- but I'd go with a much faster Airless sprayer for larger things, like a wood fence, house, shed etc. This goes slower than an airless and you'd constantly need to be filling the cup with paint to finish the project. I definitely would NOT use it to paint walls in a room, it's way slower than a roller. I'd recommend using it for a closet though, since it's more difficult to manuever a roller in a small space. It uses surprisingly little paint to get good coverage though. I used under 1 gallon to cover both sides of 27 cabinet doors, 9 drawer faces and all the cabinet faces. I was surprised that's all it used. Overall, it works great for the price but, as with anything, a lot depends on the user's experience, comfort level and willingness to learn and practice.

Use this paint sprayer for the first time today. Didn't really have any problems with it, except it uses. More paint than I thought. But that could be because I was painting 4 sections of lattice, 36 inches. Wide by 8 feet long. And there's no way to stop the spray from going through the holes of the lattice, which is wasteful. I get that. But so far it seemed to paint well, I didn't thin out the paint I use latex paint with primer .used the 2.0 tip because of being roughwood.

I bought this sprayer to treat a new fence. It turned out to be the right tool for the job. It works like a carburetor attached to blow dryer. The smaller the nozzle, the finer the mist. The trigger turns on the blow dryer, while it also regulates the fluid flow. There is and adjustable stop for setting the maximum flow. I sprayed undiluted BLO onto cedar pickets. The smallest nozzle with the flow valve 2/3 open provide the best result. I treated both sides of an 80 ft fence in four hours. Only had to brush the tops of the boards. Clean up was an easy five minutes job. I am happy with the results.

Repainting 12 (72in) shutters for the house yesterday. The new spray painter I had clogged/quit working about a third of the way through-so frustrating. Got on Amazon and ordered this paint sprayer and it was delivered last night. Went out this morning and finished the shutters and then started on the fence. Worked like a champ—no clogging, even coat. Clean up was very easy. Going to get more paint and finish the fence. I was applying a high sheen enamel finish acrylic.

for the money, this is pretty good. Still have to keep eye on paint tip build up, and the air holes on either side of the tip to be free of paint. Spraying at different angles is a challenge, due to the pick up tube, and there is no particular hose adapter for the garden hose. The adapter included is just for the paint sprayer. how you get the hose to it? The container does hold enough to keep spraying and give your arm a work out vs airless. But, for small jobs, this is what the doctor ordered vs paint spray cans. Cheaper in the long run. This is not for industrial spraying of huge projects for sure.

I picked this up for a fence staining project and honestly wasn't expecting much from a budget sprayer. Figured I'd use it once and throw it in the garage to collect dust. That's not what happened. Out of the box it's well-stocked: four nozzles (1mm, 1.5mm, 2mm, 3mm), a viscosity cup, cleaning brush, needle, filters, and a couple of adapter joints for blowing dust off the surface before you spray and for rinsing the line with a hose afterward. That flushing feature is genuinely useful. Cleaning is usually the reason I hate painting projects and this makes it much less painful. The motor is loud but powerful. On large flat surfaces like fence boards or cabinet faces, the finish comes out smooth with no obvious lap marks. The three spray patterns (horizontal, vertical, circular) actually make a difference depending on what you're covering. Circular works fine for most stuff; horizontal is better if you're doing long vertical boards. A few things to know before you buy: ignore the viscosity cup guidance for latex paint. It'll tell you to thin way too much. A small amount of water, maybe half a cup per gallon at most, is all you need for most exterior latex. If you follow the cup numbers you'll end up with paint so thin it won't build any coverage. Also, this thing goes through paint. It's efficient in the sense that you cover ground fast, but the paint consumption surprised me on a lattice section job where a lot of material passes through the gaps. The blowing joint for pre-cleaning surfaces is a nice touch that most cheap sprayers skip. Small thing, but it shows some actual thought went into the design. It's not going to replace a professional airless rig for a whole house, and the cup capacity means you're refilling more than you might want on a big project. But for furniture, cabinets, decks, and fences? It more than earns its price. If you've been putting off a project because you didn't want to deal with a brush and roller, this is a low-risk way to get it done.

The rating is not really about the product. It could be great for all I know. It was advertised on Amazon UK but the device is for US users with US voltage and US plug so a non-starter in the UK.

The device burned in my hand after three minutes or less of the first use

Its not the same brand in the adver، returned ✋🏽. تم استلام قطعة غير مطابقة للصورة، تم ارجاع المنتج.