MP75 Polyurethane Hot Melt

Great adhesion, zero failure potential. For use in critical woodworking joints. My go to for interior and exterior.

Tube of glue works perfectly, unlike the original tubes from Franklin that got stuck or were hard to get a second use out of them. But this one works perfectly from beginning to end of tube.

Not sure if I got a bad bad batch, as this is the first time I’ve tried MP75, but it would not adhere well to wood, I was gluing together Fir casing, and the bonds kept separating under very light stress,. I’m not sure if this formula requires an inordinately long bond time, but I have used both Ww30 and WW60, and they bond very well after only 5 minutes. With MP75, my joints were falling apart after an hour.On the flip side I do like the thinner viscosity compared to WW60, although ww30 is definitely thinner.Perhaps this MP=multipurpose formula is not meant for wood, but they should remove it from the marketing label if that is the case.

I've been using these products for quite a few years now (over 10?) and they do work well.Pros: Hi bond strength and working time pretty much as advertised. They are expensive so I don't use them for everything but they have worked well for what I have used them for.Cons: Shelf life is short (under a year), so don't "Stock up and save".Overall, when used appropriately, they work well but they are definitely NOT for everyday use or all types of projects.

What a great glue and product

The media could not be loaded. I bought 2 of these tubes to have on hand as needed. I had a project that required an adhesive so I opened up one bag, removed the cartridge and placed it in the hot melt gun. Initially I set it on the low setting and waited for 25-30 minutes. Nothing. So I tried the HI setting for another 30 minutes. Still nothing…no drips, impossible to squeeze out. See video!

great value

Great stuff