UV Resin Kit for Bonding

Great value for the amount of resin and the ability to recharge the UV pen. Works great! Seals well. There is a little of odor but that’s expected working with a small amount of resin. No mixing needed. Wonderful to have on hand to seal fraying iPhone cords and many other things! Very easy to use.

The USB Penlight pumps out enough UV light to harden the included resin, within the specified 5 seconds. I use it to assemble wargaming miniatures. I also bought a UV Nail Hardener, which is nice because it has multiple UV LED's, which bathe a miniature in a flood of UV light. I use the penlight to harden the resin, then I put the figure within the UV Nail Hardener, turning it over every 15 seconds or so, to ensure the resin is fully hardened. Overkill, but it gives me more confidence.I had a large, 65mm, metal miniature which had its hand, holding a weapon, fall off. I applied a sparse amount of resin to the joint, held it in place, then I applied the UV Penlight: it hardened, the hand and weapon are still holding, two weeks later, without issue. I applied gentle pressure to see if it would hold, and it is. This is incredibly useful for miniatures gamers who need on-the-spot repairs, quick and easy. Figures break during game play, quite often, and this will allow quick, easy repairs to be made with minimal interruption of the game!I tried to repair a broken plastic tab with the resin, yesterday. It cured, nicely, but the resin bond with the clear, hard plastic, was extremely weak, and it broke off within minutes. It is not a cure-all for every material, so experimentation will be necessary. Cheers!

This works very well and fast too. I needed to repair a porcelain collectable figurine as I had nothing else to use. So I decided to try this. It's easy to use and the UV light included was great. I checked carefully just how the pieces of this broken girl fit together. So I started with the base and it worked well and looks very nice. Long story short, be certain just how you want things placed, hold them tightly together in the right place before you use the light. The light works fast and bonds the pieces very tightly. You can't move it to adjust the position after you have the UV light on it. Works great, read the directions carefully and put the item together very carefully. I didn't notice an odor, it wasn't too thick and it dried clear. Good product for a very good price.

Ordered this as a larger quantity to another brand of UV resin on the market. It seems to work quite well; bonding in mere seconds once the UV light hits the adhesive. The actual resin appears to be quite sticky and adheres to the materials well. It does flow nicely into the material before you hit it with the UV. However that can be slightly detrimental, as the bond may not be as strong if you can't expose it to the UV light from the other side. One other quirk is that the adhesive, once cured with the UV light, seems to be "wet" still if you run your finger over it. It does not appear to fully harden as the other brand. I thought perhaps I didn't cure it long enough, so I left the UV lamp on it for a considerably longer time then was recommended.....still feels a bit wet. Fast forward a week or so, and the resin still feels wet, though it isn't, and the parts are holding well. This was used on the dashboard of my vehicle, and it definately gets exposed to heat and UV light through the windows, so not sure what the resin propertys are that keep it that stick wet feeling. Still, a good product that I would recommend.

Worked like a dream. I needed to fill in a piece of glass that was chipped. This did the trick. After curing, it is completely clear.

Seller is good. The product was shipped to me quickly. The only issue I have is the resin works great but the black light that it came with it doesn't work so well. I guess it's what to expect based on the price. If you pick this up, youll want to invest in a better black light flashlight

I absolutly love this stuff. It was my 1st time using it and it was so easy. It's held everything I've tried it on. Metal, glass, Crystal, even an set of darts (the aluminum shafts) and its held strong. Before writing my review i read some of the other ones regarding this uv resin. I was shocked at some of the negative reviews. But I think I may be able to clear up something. Some people wrote about the resin not gluing things together. Thus resin works by activating to uv light. ONLY the resin that the light can reach will be cured and set. If the uv light can reach the resin , the resin won't cure. So if you're trying to bond items that are solid and the light can't shine through, this item will not work.

This resin has been a lifesaver as an architecture student! Sometimes I just need a model to be assembled quickly and the 5-second cure time is consistently accurate. The light pen is lightweight, portable, and RECHARGEABLE (so no more tossing dead black lights)! It recharges via USB-C fairly quickly and dries clear and strong. It's a little iffy on metal, but that's because smooth metal doesn't have much for the (any) glue to grab onto.The only con I have to this product is that the packaging isn't the greatest. I'm constantly having to deal with sticky residue left on the outside of the bottle or in my bag because the lid does not secure and therefore is prone to leakage.