what the difference between this and the polycrylic??

I use both for different reasons. This oil base is more durable against wear and water rings than polycrylic for things like table tops and countertops. It is easier to get a smooth finish when brushing because it dries slower and flows out flatter. It WILL impart a warm, yellowish finish that is visible on lighter woods, and it will create a darker patina with age. It gives a warm, amber glow to medium or dark wood finishes. This quality may or may not be desirable. It usually only requires two coats. Use it for durability, a warm, aged patina, and ease of application towards a smooth finish. Polycrylic is not as durable and can show "elbow wear" on table tops after a few year. It will stay crystal clear on white woods, but can impart a milky sheen on darker woods. It dries fast, so you can sand between coats much quicker than oil. However, that can make it tricky to brush it on and get a smooth finish, especially if you brush back over it when it gets tacky. It requires minimum of 3 coats, 4 for long durability. on wearable surfaces Use it when you need a crystal clear finish on light colored woods, and fast drying between coats is desired.

Will it be very shine and smooth for the surface after I use? thanks

Yes. I recommend first using a 600 grit sandpaper to lightly remove old finish. Remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Wait 24 hours to dry. Next lightly sand using a 1500 grit sandpaper, remove all dust with a damp cloth, and then lightly spray on first coat (Thin coat best). Repeat this step two more times. Glass feel may require additional applications. Remember thin coats. PS: If you choose the brush method, do not use sponge brushes since it is more likely to leave bubbles, use a good quality sable hair brush. I did a bar top decades ago applying clear polyurethane with about 20 thin coats in the first year about once every other week and I left a penny at the end of the top and coated over it until it disappeared ant the bar top was so smooth. The top was red mahogany that is probably still a luster for the new owner. I could slide a bear from one end to the other end.

Can this be used on floors?

Yes, this oil based polyurethane fast drying is absolutely engineered for hardwood floor and definitely in high traffic areas. I used the water based polyurethane in the dining room and this is the hallways, this looks so good and is holding up better than expected.

what is the best way to apply this

Use a bristled brush. Those sponge brushes leave bubbles in it.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan

Customer Services

About Us

Customer Support

Our Other Brands:Hewyn|Selfship

Reviews

M**E

Reliable Polyurethane Finish for Long-Lasting Wood Protection

I’ve been using Minwax Fast Drying Polyurethane Protective Wood Finish, and it provides excellent protection for wood surfaces. The finish dries quickly and builds a durable, resilient layer that shields wood from scratches, moisture, and wear. For the best results, multiple coats with light sanding between each layer are recommended, as this helps create a smooth, even, long-lasting finish. Overall, this product is dependable, effective, and a must-have for woodworking or finishing projects where lasting protection is a priority.

6.01.2026

C**N

Lo mejor del producto es su fácil aplicación y lo bonito que resalta la madera.

El mejor barniz que he usado es Minwax. Muy fácil y de aplicar con brocha de pelo de camello. Deja un acabado que resalta la veta de la madera como ningún otro barniz que he usado.

22.08.2025

O**D

Great product

Used this on a solid oak table. Looks lovely. And the seller ships fast and packs very well

26.11.2023

J**O

MUY BUENO, SECA RAPIDO

22.05.2025

M**E

Excellent Protection with a Beautiful Low-Sheen Finish

The Minwax Fast-Drying Polyurethane in Warm Satin is one of the best protective finishes I’ve used for wood projects and furniture. It builds a durable, long-lasting layer of protection while maintaining a soft, natural look that doesn’t appear overly glossy. I especially prefer the satin sheen over semi-gloss, as it highlights the wood grain without adding unwanted shine. The finish applies smoothly, dries predictably, and delivers professional-looking results when built up with multiple coats. Overall, this is a reliable, high-quality polyurethane that offers excellent protection while preserving the character of the wood. Highly recommended for furniture and fine woodworking projects.

6.01.2026

ASIN	B000VZLF58
Best Sellers Rank	415,651 in DIY & Tools ( See Top 100 in DIY & Tools ) 1,116 in Stain
Brand	MINWAX
Compatible Material	Wood
Coverage	250 sq ft/quart
Customer Reviews	4.7 out of 5 stars 4,982 Reviews
Finish	Satin
Finish type	Satin
Global Trade Identification Number	00027426630109
Included Components	Minwax 63010444 Fast Drying Polyurethane Clear Finish, quart, Satin
Item Form	Liquid
Item Type Name	Minwax 63010444 Fast Drying Polyurethane Clear Finish, quart, Satin
Item Weight	454 g
Item weight	454 g
Liquid Volume	32 Fluid Ounces
Liquid volume	32 Fluid Ounces
Manufacturer	Paint Sundries Solutions
Material	Polyurethane (PU)
Recommended Uses For Product	finishing interior wood surfaces, protecting wooden furniture, sealing wooden doors and cabinets, enhancing the durability of wooden floors
Recommended uses for product	finishing interior wood surfaces, protecting wooden furniture, sealing wooden doors and cabinets, enhancing the durability of wooden floors Recommended uses for product finishing interior wood surfaces, protecting wooden furniture, sealing wooden doors and cabinets, enhancing the durability of wooden floors See more
UPC	027426630109
Unit Count	946.3529 millilitre

63010444 Fast Drying Polyurethane Clear Finish, quart, Satin

Details

Description

Specifications

Reviews

Common Questions