SHITONGDA 62Pcs Dent Removal Kit Car Dent Puller Auto Paintless Repair Tool Tap Down Slide Hammer Glue Gun Stick Pro Pulling Tabs Kit Line Board With Tool Bag For Car Hail Damage Remover

Description

How to use this paint less dent repair kits? 1. Clean the dent with a clean wet cloth; 2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; 3. Glue a Tab with hot melt glue: - Use Lifter or T-shaped repairer : Glue a Pulling Tab with hot melt glue on it's back by glue gun tool; - Use Bridge Puller: Glue the middle tab of Bridge Puller set with hot melt glue on it's back by glue gun tool; 4. Put the Tab with hot melt glue at the center of dent fast, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes ). 5. Pull out tabs: - Use Lifter: Screw the rotary axis of the Lifter to find a perfect range for the spring which can pull the tab out. Then press the handle to pull out the tabs directly; - Use Bridge Puller: Adjust the three screws' height to find a perfect place for the Bridge Puller, then pull out the tabs directly; - Use T-shaped repairer: Align the T-shaped repairer and press the drawing tabs with hot melt glue, pull the sliding rod backwards to pull up the dent; 6. Check dent still exists, knock it slightly with a flattening hammer or pen; 7. Use the plastic shovel to remove the glue stuck on the machine body. Please use alcohol on hand as well to use to remove the glue that sticks to the vehichle. Product list: 1 pcs 100W Glue Gun 1 pcs Pull Yellow bridge puller 1 pcs Gold Dent Lifter 1 pcs Red Mini T Bar 9 pcs Metal Tap Down with 9 Heads 5 pcs Nylon Tap Down 9 pcs Glue Sticks(white/yellow/black) 1 pcs Rubber hammer 1 pcs Clean Cloth 1 pcs T Slide Hammer Tool1 pcs White Glove 24 pcs Purple Glue Tabs 1 pcs Alcohol Bottle (emptoy) 2 pcs Plastic shovel 1pcs User Manual 1 pcs Blue Tool Bag1 pcs Line Board with black bag