Performance Tool W41023 6 Ton Ratchet Jack Stands, Yellow, Pair

These stands are tough and will last a lifetime. I use them on a 3/4 ton Dodge Ram Diesel and they do the job. As previously mentioned make sure you don't get them for the average car or small truck cause they are very tall in the closed position. I have a 4" lift kit on my truck and have to jack up the truck and get the wheel off the ground before I can slide the stand under the axle. Once there though the truck if never coming down. A question came up if they were made in the USA.... they are not... made in China.

Used these to support my 30' gooseneck trailer and other vehicles. Holds up very well and have had no issues to date.

These jack stands are super strong and I feel very safe under my car with these , they are very tall even on the lowest setting I have tons of room under the car .... you will need a jack that can go to 24” to get full use of these bad boys .

great for the price, yes chinese made but no messed up welds or anything like similarly priced jack stands on amazon which have been reviewed if you look around, as mentioned they are pretty tall, thats what else was hard to find, jack stands to use on my moderately (3") lifted fj62...one review said something about a 4 inch lift on a truck and he still had to jack it up to put the lowest setting under the frame, i forget what truck he said he had but no, he is either wrong about the height of his lift or the truck has the lowest frame ever. these fit under my truck on the lowest setting without being jacked by about 2". which gives plenty of room to work with on clicks up. moral of the story is these are great for a lifted truck and yes as everyone else said not a stock car. probably plenty of stock suvs and trucks as well though.

Just right. Worked great for me. Just be safe when you do anything under a car. I bought these to put a lift kit on my jeep. I needed something strong and tall enough to drop the axels to get those large springs in and out. These stands worked great. I was careful and felt very safe. I recommend this product. Hard to beat the price for 6 ton stands

It’s a very sturdy jack. I got two pair to put under my van while I changed the oil and transmission fluid. Good purchase and tool to have for years to come.

Reviewed — 6 ton I needed some heavy duty jack stands for a Ford E350 work van that is typically fully loaded with tools. Based upon one of my buddy's recommendation, I picked up a pair of these. PACKAGING: Other reviewers have knocked a couple of stars off for the packaging. Well, its true that they come in a pretty flimsy box that is packed inside an Amazon box. The inner box had a few small holes but was still intact. And really, these brutes weigh in over 30 lbs — you have to expect that the loading monkeys aren't going to be using kid gloves on them... Mine also had a few paint scratches on them. Who cares? Its a brute tool. The first time I used them I put more scratches on them. Four stars - if the manufacturer cared if they come in all bright and shiny they should use a package that is more substantial. FIT AND FINISH: They are jack stands not aerospace widgits and they are built as such. The welds are well, welds. They aren't beautiful stacks of dimes and the manufacturer didn't spend 2 hours grinding each weld down to a pretty filet. I also haven't X-rayed them to see if there are inclusions and voids. But I don't have to. Its a brute tool. The welds look sturdy and they have held up my van and friends trucks, without even a groan. The paint, again, I wasn't looking for a Ferrari candy apple paint job with 17 clear coats, buffed and polished. They are painted, a few dings out of the box but nothing I haven't done worse through my use. 4.5 Stars. USE: If you are looking for jack stands for your car go for the 2 or 3 ton versions. The 6 ton versions are for holding up big heavy vehicles like trucks, vans, and buses not cars. Although they will easily hold up your car, you will be jacking them up 2-3 times higher than necessary. These guys have some weight to them, something in the 30 lbs range for the two of them. The ratchet gears are smooth and beefy. When lifting the post, they go up with ease and the ratchets engage with the lock/release arm without a problem. When you lift up on the release arm, the posts drop down as they should. I imagine that if I take care of them they will last me the rest of my life. 5 Stars Overall I give them a 4.5 out of 5 stars. I liked them so much, I bought a pair of the 2 ton version to use on my car.

This is a good jack stand for any purpose. I use it when I level my RV while out camping. It is the right height for my RV. and easily goes up and down. Its a little heavy but that is to be expected given that fact it will hold 6 tons.

These are the same as the picture shown. Welds are very well made and the product feels strongs.

Description of product says 2 stands are included as a set. Ordered these 3 times with a replacement, package only comes with 1 stand. Please change this.