D-333T

I've been using this for a month and am amazed at this set-up. I play on theater-sized stages and needed a mic that could transmit over a large area. This mic does the job well and at a very reasonable price. The mic sounds great and, after running it through multiple soundboards, I am very satisfied with the sound reproduction. I have no need of the EQ and Echo because I run it directly into a Harmonizer pedal with its own EQ, Delay, and Reverb. The receiver always recognizes the mic when turning both on. I actually use the USB cord to plug the receiver into a outlet so it stays charged and I don't have to worry about the battery. Both units have on/off switches. The convenience of not having a stand-alone receiver taking up stage and case space is wonderful as well. All in all, I am very satisfied with this product. ********************************************************************************************************************** TWO YEARS LATER: Two years and many theater shows later, the whole set-up works perfectly.There have been ZERO drop-outs on a large stages and rehearsal rooms. I've even walked out into the audience and up the aisles playing the sax with NO mic problems whatsoever (the mic and the receiver always immediately pair up and I've never once had to change the signal frequency). Ease of use and total reliability of performance have made me extremely satisfied.

This is a great mic! I use it for solo and duo shows playing saxophone. I bought a second one after using the first one for a few years as a backup. The range is also good, guessing a good 60 ' or more.

I bought two of these for our gigs. We play out several times a month in breweries, restaurants, some outdoor events, etc. The first unit is working flawlessly. The second one I bought, the microphone transmitter part all of a sudden stopped working. It wouldn’t turn on. The battery was fully charged. I contacted customer support and the sent me an entire new unit free of charge and told me to keep the other faulty one and dispose of it. I’m glad we kept it because the new one I received, the receiver couldn’t make it through a full 3 hour gig without the battery dying. I was able to pair up the receiver form the faulty transmitter mic with the newest one and they now work perfectly. One is on an alto sax and the other on a soprano sax. I wish the mic arm was a bit longer for the soprano to reach mid horn when clamped to the bell, but that’s the only issue. 5 stars for the awesome customer service. Great sounding system too.

OK ... got a Christmas Eve gig coming up at the church, and I needed two wireless mics, 1 for a saxophone, the other for a mandolin. Cudos to Amazon/SGPRO .. got the mics several days before scheduled delivery. I'm going to echo the one other review on this product ... there is no fricken user manual!! Took both up to the church, plugged one in, tested it ... sounds GREAT! Turned on the other one ... changed the frequency on the receiver .... wha wha wha wha!! Here is where that manual would have come in handy. It's easy enough to change the frequency on the receiver, push the unlock button, then push the adjustment knob to toggle around, change your settings, and then just wait and it relocks itself. HOWEVER ... since the mic/transmitter come already assembled .. a casual glance does not reveal that there is an IR Window for programing on the transmitter that can't be seen until you remove the transmitter from the mic. You clearly see this little IR button on the receiver, and you push it, and the IR light on the front starts flashing ...but I had no idea what it was searching for until I came back to the Amazon page, and found some addition information on the unit at the bottom of the page. SO .. since the SGPRO guys don't seem fit to give us a manual ... you can use this review at the manual. It's all really pretty simple. Assembly: attach the antennas .... they are quick connect. Just line up the slots on the cuff with pegs on the unit, push and turn. ... done. Plug in the AC adapter in the back. Plug in your output line .. it has both 1/4 in and XLR (I bought this unit because it has the XLR balanced output that easily plugs into our digital snake). Turn it on! It will originally be set to GR-6 CH-1. As I said, the Microphone comes preassembled and preprogrammed to 6-1. You are ready to go. If you have multiple units, like I have, you have to change the GR or CH on the receiver. I changed both to give as much spread between signals as I could get. Simply push the "unlock" button. Then push the "adjustment knob" to toggle through the menu. Turn the knob to move inside the menu. For example ... push unlock, you'll have three choices on the main menu ... GR/CH, Scan, Effects. Highlight the one you want by turning the adjustment knob, and then push the adjustment knob to select. That will open up the sub menu. For example ... GR/CH will have GR and CH under it. Select the one you want with the adjustment knob and push again. This will highlight the number on the right side of the screen .. either GR or CH depending on which you selected. Turn the knob to change the GR or CH. You'll notice that as you change them, it will automatically change the frequencies. When you are done, push the button again. In some cases you'll see an "exit" .. turn the knob and select exist and push again. You can do the same with the "effects" menu. After you get things the way you want ..... just wait. The system will automatically relock. AT THIS POINT .. you have to separate the mic from the transmitter. They show you how in pictures on the Amazon Product Page (basically, use your thumb to "slide" the two apart ... kinda like you would slide a lithium batter onto a cordless drill). On the underside of the transmitter (the face that faces the mic), you will see a glass square (this is the IR window). Turn ON the transmitter, then on the receiver, push the IR button. The IR light on the front will start flashing. Hold the window up to it about an inch or so away, and it will program the transmitter to the frequency you selected on the receiver. The IR Light will stop flashing once it has synchronized the transmitter. Slide the receiver back onto the mic, and bam ... your transmitter is now synchronized with the receiver. Now you are ready to play. While I'm at it ... if you are using two units ... and turn on both transmitters and both transmitters are tuned to the same frequency, neither will work!!! It confuses the receiver. Don't freak out ... just turn both receivers and transmitters off. Turn on the one receiver, and it's matching transmitter and leave the other transmitter OFF until you reprogram it and change the transmitter frequency. I hope this helps people. All the other wireless instrument mics I saw that had an XLR output were over $600!!!! .. and most of them didn't even include the mic .. just the transmitter. These little guys really are a good buy. And the sound is full with really good low responses.

Needed a second wireless and did not want to kick out $450 for another Shure BLX set. I saw the positive reviews of the SGPRO and figured it would be at least worth checking out. Upon receiving I was impressed with the build quality, metal housing was not expected. The mic/transmitter has more plastic parts but still well built. Have used it on 3 shows ( 1 was actually on trpt ) and sound quality, no noise, plenty of gain, all excellent. Battery life on the transmitter lasts the entire gig and love that there is a USB port on the back of the receiver so you always have a place to recharge mic in between sets if needed and I even use it to charge my ph/ipad. I have not dug into the settings for echo/delay or the adjustable EQ as the sound man handles that but in smaller settings doing our own sound this would be a nice feature. Give SGPRO a shot I think you will be pleasantly surprised as I was.

Ich nutze das Mikro als Wireless-System an meiner Nykelharpa. Ich hatte damit noch nie Probleme und der Sound ist fantastisch. Die Akkus laden auch schnell und halten für mehrere halbstündige Auftritte an einem Marktwochenende. Zudem sitzt der Sender fest ohne das Holz des Instrumentes zu beschädigen. Dafür war mir auch der etwas höhere Preis was wert.

Los materiales, a pesar de ser plasticos, se sie ten de buena calidad. La fidelidad del sonido es bueno, el alcance me ha resultado suficiente. Es un poco complejo al principio aprender a aplicar los efectos, pero una vez que lo entiendes, mejoran mucho el sonido. Viene en un maletin que se ve muy pro. Aun no lo uso lo suficiente para saber cuanto dura la bateria del transmisor, pero le tengo fe.

muy buen micrófono, cumplió todas las expectativas que tenía con respecto a él.

Perfect mic ever thank you Easy and comfortable to use, clear and high quality sound

No me funcionó, se entrecortaba mucho, no sé si el producto venía defectuoso o en los lugares donde son mis presentaciones hay mucha interferencia, terminé por devolver y el proveedor me regresó íntegro el dinero así que no puedo poner mala calificación, tal vez solo tuve mala suerte, pero todo llegó bien en cuanto al producto solo que a mí no me funcionó!