Never Fall Complete Sink Repair System ™

Our under-granite sink was slowly pulling away on one side because it was installed with these stupid flimsy steel clips that push against a routed slot in the granite itself. They're not only a complete PITA to tighten, the granite has terrible tensile strength meaning those routed slots break and the clips have no purchase.I was trying to brainstorm a bracket to fix things when I did a search and found these. These are a bargain. They're very sturdy, very simple and much better than the competing products. They are not only stronger, they have many degrees of freedom, swiveling a bit at the top so that if you are stuck pushing up against a clip (rather than flat between them, for instance) that's no problem. You can also mount these without having to have them perfectly vertical because of the swivel. Once tight they will press evenly and firm up just fine. They're easier to remove if necessary because of the pins, easy to tighten by hand, easy to lock with the jam nut, and easy to mount because of the adhesive. Now I don't have to worry that a heavy pot of water or overzealous cleaning lady is going to collapse the sink into the cabinet.

Excellent product. Installation was straight-forward and the adjustability makes the extra expense worth it. Our sinks are very secure and have no concerns of them coming loose.

We just installed these on our under-mounted, stainless steel, double kitchen sink yesterday and I am impressed.Our home is 12 years old and the sink has been dropping in front for some time now. We tried tightening the existing clips but it didn't last, which brought me to research solutions when I found these. Before fixing it, there was a 3/8-1/2 inch gap in the front of the sink, for reference. I'm not sure of the limits of the brackets, but they were able to close our gap.Our sink was mounted with 4 clips held up with screws that are placed in slots milled into the underside of the granite countertop, and a glue/sealer between the sink and granite. This may have been adequate if not for a garbage disposal and the fact that the cabinet has a little hinged utility drawer in front of the sink making it impossible to support it in that entire area. That noted, we couldn't use the center mount that was included with this kit either, but the two side supports seem to be doing a great job by themselves.These parts are very sturdy and made well, IMHO. I was impressed with the weight and heft when I unpacked them. There is "peel and stick" glue-tape on the mounting brackets to hold them to the cabinet wall after you place them and before you screw them in, which is a huge help in installation. It's still a task with many frustrations, mainly from lack of accessibility under a sink with existing pipes and a garbage disposal, but we managed to mount them and tighten everything together after the caulk/sealer was applied. Hooray! It looks like a successful project completed!Fortunately, our double sink was a tight fit in the cabinet and the walls were close to the edges so the angle for mounting these was pretty ideal. We were able to fit the braces between the original clips and tighten them up as well so, hopefully, the combination will be adequate to support the weight even without the front sink support. There are other options that I've seen in my research, if needed, that could be added, like a brace under the disposal or sink basins.I will update my review if there are any changes or failures with this kit. I would strongly recommend it at this point and, if you're a DIY-type person, that you would be able to install it yourself. Otherwise, I'd advise a handyman's assistance.5 stars at this point!

### Five-Star Review for the Never Fall Undermount Sink BracketsI recently installed the Never Fall undermount sink brackets, and I couldn't be happier with my decision! Initially, I was just looking to prevent a potential sink disaster after hearing about a friend's mishap, but this product truly exceeded my expectations.The design is incredibly user-friendly. Simply turning the shaft of the turnbuckle pushed my sink back into place with ease, without the need for any drilling into my countertop or removing plumbing—an absolute game changer! It’s perfect for tight clearance situations, making the installation process stress-free and straightforward.Professionally made by a granite fabricator, these heavy-duty brackets boast an impressive capacity of 680 lbs. Patented and built to last, they provide unparalleled support for all types of sinks, from cast iron to stainless steel. The fact that one kit is usually sufficient for an average fallen sink is just icing on the cake. Each turnbuckle effectively replaces two supports, so you end up with five solid points of reinforcement—talk about peace of mind!The installation was a breeze. I simply inserted the double-headed sink bracket, peeled the double-sided tape off the wall bracket, and pressed it into place. The temporary adhesive allowed for hands-free operation, making it easy to secure everything with the included screws. I loved how quickly I could raise my sink into position by just turning the turnbuckle—no more awkward contortions under the sink!One tip: if your cabinet wall is exposed, make sure to measure the thickness before using the provided screws. I found that matching them with slightly shorter screws from my local hardware store worked perfectly, ensuring I didn’t break through the other side. It’s these little details that make the difference!With the Never Fall system, I now have the reassurance that my beautiful new sink is securely supported. It comes with a comprehensive instructional manual and a helpful video link, which made everything even simpler. Plus, the lifetime warranty adds an extra layer of confidence.If you’re considering enhancing your sink’s stability, look no further! The Never Fall undermount sink brackets are a must-have. Trust me, this system will never fail you! Highly recommended!