High performance combination pliers

Had a computer table where the camlocks had sheared where the keyboard tray attaches to the top. I didn't really want to have to break down the table of try to drill the broken screws out I decided to get this. Having purchased these pliers I tried to remove these broken screws. The pliers gripped the screws very well on very thin edged heads, allowing me to remove them with ease and I couldn't believe how well it worked! ;-) The pliers themselves are a lovely bit of engineering too - nicely hardened steel, sharp teeth, precise jaw mating and the pivot is free moving with stickiness. N.B. I even purchased a mini version of these just in case I have the same problem with a smaller screw in the future. It's worth every penny in my opinion!

These pliers are quite simply a must-have for any toolbox worth its weight. I cannot count the number of times over the years when I have wasted time and effort to try to remove damaged screws (especially philips type) with ordinary pliers and vice grips et cetera, usually ending up having to drill or cut the screw head. If only I had of had these! The Neji-saurus (love the name btw:-) is a quality Japanese made product designed specifically to help remove damaged screws. Fit, finish and machining is excellent. And it really works well I have to say. I tried it on several screws and had no difficulty gripping and removing the screw (naturally this only works with protruding screw hears). But it is also a great pair of pliers in of itself. The grip threads on the pliers have been machined both horizontally and vertically and as a result these pliers provide fantastic grip even on thin materials. These pliers will do all the jobs an ordinary set of pliers will do; grip, hold, cut - only much much better because of the vertical machining and teeth locking pattern. Honestly, these grip like no other I have used. (see pics below) Love this product and would absolutely recommend it to everyone. Put it like this: if I had to choose only one pair of pliers from among my collection of many this would definitely be the one. If you found this review helpful then please tick the YES box below. Thanks. Happy to answer any questions if you care to leave a comment.

Good tool

I am notoriously guilty of not leaving reviews but this pliers works so well that I had to write one. After stripping two screws that rusted into a metal gate (trying to remove an old strike plate), I purchased a screw extractor set that fits into a drill. It completely failed despite following the instructions clearly and double checking online. The quality of the screws was obviously poor so the metal continued to simply strip further with the extractor. I then purchased this pliers which gripped both screws very well on very thin edged heads and I couldn't believe how well it worked! After trying it on another stripped screw I'm pleased to the point of wanting more stripped screws to remove ;-) I even purchased the mini version of this in case I have the same problem with a smaller screw in the future. It's worth every penny!

I think the tittle says it all, I bought one set of these and I have bought two more since (of different sizes) they are great nice smooth action, nice and hard jaws the grip all the screw I have tried them on well and the handles are comfortable. I can definitely recommend these I would buy more but the 3 pairs I have cover there range. Why only 4 stars ? I prefer to give 4 stars as there are fewer reviews Can take a little time to come as they are imported Even the smallest pair get a good grip

I was having trouble removing rusted out screws from a tile wall (holding an old shower rail that had worn out). The screw ends were totally useless with nothing for a screwdriver to get a purchase on. I tried the 'Grabit' screw extractor system, which did indeed cut nice little cones into the screw heads, but failed to shift them at all. I tried cutting slots into the shafts with a junior hacksaw to slot a screwdriver into, but no joy. I almost resorted to pulling them out with a claw hammer, but would surely have broken the surrounding tile. Then I came across this little jem. It absolutely worked, the pair of offending screws removed in less than 1 minute, tiles all still intact. I was so pleased with this tool I thought I really should write a positive review. Thanks!!

Bought to do a bit of renovation work on a historic old machine. Did not want to potentially damage the female thread and subsequently repair. Extracted the failed bolt easily. 50 years in engineering and untold number of damaged bolts and screws removed, accompanied by various entreatments' to the gods. This will be my first port of call in the future. Nobody ever mentioned this device and my colleagues have been trying to get one over on me for a long time. Also good quality item and better than useful for general/subtle plier work.

Brilliant extracting rusty screws where you can grip the side of the head to twist, got me out of trouble lots of times to save me drilling screws out a perfect example is in the back of Electrolux aeg and zanussi ovens when changing element

Excellent quality tool. One of the best designed I have ever seen. No wonder it got an award. Totally worth it.

Lots of specialist functions. Beautifully made and styled. But don't throw away your old, sturdy plain fat flat nose pliers. Sometimes you just want to rip and twist some stuff, this one seems to be too delicate, or precious, for such rough stuff.

Pince très solide, pas très lord pour utiliser

固く締まりすぎぎて十字を潰してしまったトラス頭小ネジをどうしても外す必要があったので頭の片隅に記憶していたネジザウルスの存在を思い出したので買って使ってみました。最初は試行錯誤しても外せず諦めかけましたが前に押しながらネジを挟むやり方で回したらあっさり外せました。ネジザウルスってやっぱりすごいなって感動しました。

bon outil très robuste.