Sukh 310G Moldable Plastic Pellets - Thermoplastic Beads Polymorph Plastic Meltable Reusable Thermal Beads for Crafts,DIY,Cosplay,Temporarily Repair,Modeling,Halloween Vampire Teeth Fangs

Very easy to use, surprisingly durable. It is reusable, but plastic is a great insulator so you'll need to trim exterior pieces off in multiple steps if you made something thick.

It took me a minute to really learn how to use this and properly shape it into a tooth, but once I got the hang of it, it worked very well. The pellets melt easily in hot water and become very moldable. After shaping and letting it cool, it hardened nicely and held its form. You do need a little patience at first, especially if you’re trying to shape something specific, but it definitely does what it says. Overall, I’m very satisfied with the results. Just give yourself a little time to practice and you’ll be good.

Never though shaping plastic could be so easy. Used for making a mold of my teeth and also a grinding guard. This stuff is very sticky. Sticks to itself, and I put some on a piece of paper before it hardened and it was like glued on. Decent quantity for the price. Some tips: Put some hot tap water and beads in a bowl and microwave for 10 to 20 seconds. If they aren't transparent add more time. For a small amount even 5 seconds was enough. When clear looking, carefully pour water out of bowl so you don't burn yourself and play with plastic until it's uniform. At this point it can be shaped, but it's very soft and first and will still move/ooze until it cools off enough. It's pliable until it turns white. If your molding teeth and find pulling off messes the shape or it's hard to keep in place, put ice on it. The ice makes it harden more quickly which was really helpful once I figured it out. Put in freezer to harden it faster. It can still change some while cooling so the faster the better. I'm not positive but I think it shrinks a little as it hardens. For dentures it should be left in place I think until fully cold and hard.

I used this to make fangs for a cosplay and I'm sure I will be using it for other creations. It's easy to use, and rather durable. It is even easy to sand and trim down with a rotary tool. Only thing that is unfortunate is you can't add to it once it has cooled. Any additions will just snap off or detach. You must reheat with more and start over. Also be careful that your work area is clean as ANY debris or material (other than silicon) that it touches will permanently bind with it.

Does the job.

You need to have patience and watch videos on YouTube to really understand how to use these beads if you’re using them to replace a missing tooth. Attaching it so it stays in place takes time and patience in figuring out too. It’s well worth it. Mine is attached to my partial. I watched numerous videos before I found one that taught me how to mold one and attach it. This saved me from having to run around for months missing a tooth. My fake one blends right in and you can’t beat the price of these. This is temporary and can last weeks if you are careful and eat soft foods and don’t drink too hot of liquids or it softens and changes its shape. Coffee or tea can stain it so it isn’t way too white. Take it out when you’re at home or alone. One tooth can last a month or longer if you’re careful once it’s done, with what you eat and drink. And you can always reheat and remold the beads when it doesn’t turn out right, I had to do this a few times, it’s better than having no tooth!

Perfect! Thank you so much Molded myself and my friends some 🧛‍♂️ teeth I would say for those confused (make sure you read instructions and perform safely!)

Hi decent product comes in handy in emergency

Muy buenos me gusto

Works exactly as described. Fun to use and always thinking of more things to make. Perfect for DIY and fixing things around the house. A bit tricky to get the hang of shaping because it can get sticky/stretchy but that’s also the fun part.

Brilliant product can’t say anything bad.

Ein tolles Material, ich habe damit ein Raubtiergebiss für ein LARP-Kostüm modeliert. Mit einigen Tropfen Lebensmittelfarbe konnte ich es super färben. Ist das Thermoplast abgekühlt, so ist es erstaunlich stabil, im warmen Zustand lässt es sich super formen und kneten. Ich habe ein paar Versuche gebraucht, weil ich zu Anfang zu ungeduldig war. Je heißer das Material ist, desto weicher wird es und so war es anfangs zu weich, als ich es nochmal erwärmte und dann ein wenig wartete, bis es zäher wurde, konnte ich es besser formen. Man kann das Material mit dem Dremel, einem Skalpel oder Schleifpapier bearbeiten, aber dabei sollte man Geduld mitbringen, denn auch wenn es außen hart ist, dauert es etwas, bis auch der Kern ausgehärtet ist, am Besten vor der Nachbearbeitung 30 Minuten abkühlen lassen. Nach der Bearbeitung kann man die Oberfläche durch kurzes Eintauchen in heißes Wasser glätten, aber Vorsicht, ein paar Sekunden zu lang und die ganze Arbeit schmilzt wie Schnee zusammen.

Prevoyez de la colle pour dentier car ce produit ne colle pas... à moins qu'ils soit inséré dans le trou de la dent ou appuyé avec une autre dent. Facil à ramollir et à manipuler. Il est extrêmemment blanc! Je l'ai mis dans l'eau bouillantes avec du café pour donner un ton plus naturel. Et pour mon besoin ca marche à merveille! Grande quantité et bien emballé et livré a la date promise!