Universal Clamp-On 6-Airbrush Holder

Watch the price. Shop around for the best deal. This unit or very similar ones are sold under many brand names Works great with the clamp but completely unstable without it. I just removed the clamp and screwed it to a thin 4”x4” piece of wood and it is stable with 5 airbrushes in it so I have no regrets. And I can still put the clamp back on it if needed. Might buy another one soon.

good quality

Not worth it ! Cheap made and the pieces are too close together to fit all the airbrush guns . Also the two facing the opposite way are useless and gun wouldn’t sit in them.

Don't use this with a multi hose set up or you will drop your brushes, and it will cost you. Also if using siphon feed with bottles I recommend only using the top 4 slots and removing the bottom two as that has proven disastrous. I suppose if you work slow and are very careful this would serve its purpose, but I have damaged a few airbrushes using this product. Again probably my fault for not being careful or organized enough. Still looking for a better option. Maybe a DIY project in the near future.

This holder's table clamp works very well; the holder is rock solid once it's clamped down. Additionally, the individual cradles are all tightly fitted (using friction fit) onto the plastic base and chrome-plated steel arm. Unlike other airbrush stands I've used, you won't be accidentally knocking one of the cradles off when you're grabbing an airbrush out of this holder.Unfortunately, the cradles only work with gravity-feed or bottom-feed airbrushes. One of my airbrushes is a side-feed Badger 100IL, and it doesn't fit into the cradles.The bracket for the regulator is sized for the standard regulator/water-trap that seems to be sold under various brand-names -- Badger, Paasche, Airbrush Depot, Master Airbrush, etc. If your regulator is missing the panel nut required to mount it in this holder's bracket, then search for "Interstate Pneumatics WP1130PN Panel Mount Nut for Regulator W1130" here on Amazon.

personally, Badger is the only brand I use and this air brush holder holds all my air brush no problem. Even I bumped on those air brushes while they are on the holder and there were no spill. However, the bottom 2 holder are kind of non sense because the top is preventing gravity feed or bottom feed air brush to go into the holder. If you have more than 4 air brush then you have to turn the top bar to fit your air brush at the bottom. Since, I have less than 4 air brush, so I am a happy camper. I take off one star because of the design flaw at the bottom. Other than that this air brush holder stays very still on the table, and each of them holds air brush very nicely.

It is a very basic device and it holds several brushes, not much to fail or have issue with. If you are looking for function over form this is for you.

Buen producto

C'est un bon produit. Je sais pas comment les gens manipulent leurs airbrush mais il n'y a pas de raison de briser quand ont l'utilise correctement. On peut utiliser les deux holder du bas en tournant la partie du haut un peut et ce même avec des airbrush de type "gravity". Par contre, ne pas utiliser avec des Airbrush de marque Paasche car leur diamètre est plus gros que la moyenne. Très satisfait de mon achat et après plusieurs semaines, toujours en un morceau!

The top 4 fit any type of airbrush but the bottom two don’t allow for gravity fed airbrush’s. Still an awesome deal and it will do what I need