for Note 10 Battery Replacement Kits (New Upgraded) for Samsung Galaxy Note 10 SM-N970 All Models with Adhesive and Repair Tool Kits

The replacement battery arrived well packed and right on time. The box contained more tools than I needed. Better than not having enough. I was impressed with the very clear instructions and sharp pictures. The battery in my Samsung S10 cell phone had swollen to the point that the back had already started to separate the phone back from the rest of the phone. Getting the back off the rest of the way was not hard at all. I moved slow and applied heat from a hair dryer. The screws that needed to be removed were clearly called out in the instructions picture. Pop the wireless charger module out with a little more heat and the battery is there awaiting replacement. Pop off the power connector and battery removal was next. Getting the battery out required a lot of time with the hair dryer, but hurry was not going to happen. The battery was finally out and it was time to put the new one in. The replacement battery fit perfectly. I did not remove the protective layer covering the new adhesive. There was some left from the previous battery and I didn't want a lot of adhesive if I needed to replace the battery again in a few years. Connecting the battery connector took some patience because it is very small and delicate. I didn't want to break anything or rip the cable. After I got the battery installed and connected but before I put the back in place, I turned the phone on. It worked like a charm. I turned the phone off and put the back on the phone. I did not replace the back adhesive for the same reason as above. Also I have an Otter Box case that will add the bit extra to keep the back on the phone. My leaving the adhesive off will not make my phone as water resistant as before, I will take the chance. I am very pleased with what I received. I will be coming back to Viimon in the future for phone batteries.

Revised review: "purchased sept 25, 2022, failed today, so didn't even last a full year." I left this review and was contacted by Vimon and they gave me a full refund for the battery. I feel if they would do this then my experience was not a typical example of their product and I will definitely buy my replacement from them. I am impressed by their customer service and desire to make things right.

What seemed good at first turned out to be a real disappointment. The instructions were clear and the installation was easy enough, at least for an electronics engineer like me. The battery worked fine for about three months, until it completely gave out. Overnight it discharged completely from 85%, and the phone was turned off during this time. Now it won't hold a charge. I hoped to get a couple of years out of this battery, but no such luck. I can't suggest this product since its quality is highly suspect.

It was a little intimidating heating the phone up but after I got over it, it went smoothly. It came with a 60% charge so I'll update to see if my battery life is good now. I didn't use the new adhesive for the back, it was too hard to get off and the original came off cleanly so I just reheated it and sealed it. This will make it less waterproof but I'm rolling the dice. Good price and hopefully a good battery.

WATCH SEVERAL YOU-TUBES VIDEOS BEFORE STARTING - NOT SUPER COMPLICATED BUT REQUIRED PRPLANNING AN DPRECISION SO YOU DON;T BREAK ANYTHING - THE HARDEST PART WAS GETTING THE OLD AHEASIVE OFF THE GLASS BACK OF THE PHONE - TOOK 30+ MINUTES TO INSTALL THE BATTERY AND ANOTHER 30 TO CLEAN THE BACK OFF. SO FAR IT'S WORKING WELL AND AFTER 1 WEEK HOLDING CHARGE ALL DAY. WILL UP DAY IN ONE MONTH. RECOMMENDED

Es bueno a mi esposo le gusto gracias

The kit was complete and the directions were on paper and in COLOR . Clear step by step. Battery appeared to have the original Vimon sticker and come with adhesive material already on the battery ready for install. The kit came with a new adhesive material and clean up was the longest bit to clean up. Directions were great but not too clear on the adhesive material. Some folks opt for just sticking the back on or may use some B7000 adhesive. Fairly straightforward just needing some patience. Includes all the tools I needed. UPDATE: Got a second one for another phone and install went well. Still not clear on the adhesive directions so check and make sure you have it line up before you peel the carrier sheet and apply the adhesive.

I have a Samsung s10 that I (finally) paid off with Verizon. I noticed my battery was draining fast. Then it got to the point that I had keep my phone on charge. I definitely didn't want to spend hundreds on a new phone. So, to Amazon I went. I searched through many different batteries and found Viimon S10 Replacement Kit. It is an awesome product. The kit came with all the tools needed, new glue tabs. The packaging was fantastic, but most of all was the instructions. It came with a nice step by step guide full of pictures that walked you through the whole process. It was in ENGLISH and worded easy to follow along. Overall a great product, great price and great company to do business with. I will definitely buy from them again.

Rather than replacing my phone and contribute to electronic waste, I opted to look for a battery replacement for my S10 - so glad that I found this product by Viimon! The kit comes with everything you need to do this replacement yourself - as they mentioned, and I highly recommend is to watch some videos online on how to remove the cover and battery for additional measure. I didn't have to remove the cover on my phone as the swollen battery did that for me, but based on the contents of the kit, I don't think it'll be an issue to remove the cover. The kit is nicely presented and includes instructions - I noticed that the battery had a date stamp on it, which was dated Spring 2022, so that's great that the battery in the kit is new. The entire procedure took me just over an hour, and the battery has been working great! Good as new, and battery holds its charge nicely without any degrade in performance. Only thing I wished for in the kit was a clear picture on how to orient the back cover adhesive, include a tweezer and more isopropyl alcohol swabs - all not necessary really otherwise the price might cost more to produce. Overall, very impressed with this kit - highly recommended!

as described, have not used yet

My S10 battery started bloating and had popped the glass off one side entirely, this kit and a 3d printer hotplate made getting the glass back off easy. The adhesive on the phone frame side came off pretty with some scraping but the glass back side was a nightmare. It didn't care what heat it was at it stayed as a super sticky almost silicone consistency, I had to use 100% IPA and dozens of qtips as well as a small scraper to slower remove it all. The good news was the included replacement adhesive fit perfectly, and so far the phone seems fixed. Just remember to reheat the back afterwards and apply pressure all around the edges to make sure it has a good bond. I used my hotplate at 80°C and it seemed fine. I'll update if the battery ends up being garbage, hopefully not though lol.

I appreciate that the battery sent was of a 90% battery health - that was better than I expected and was expecting a battery health below 3000mah but this one exceeded this. I have only tested the battery with one full charge from 15% to 86% and found that it stated the battery at 3,126mah. It was sufficient for fixing an old S10 that I didn't want to invest too much money into. Recommended. I have ordered an S8 battery and if my experience is similar I will update this review as well and post whether their quality control is sufficient.

Everything came new in the box. My only issue is the battery capacity. It claims to be 3300 mAh but after several discharge/charge cycles it only ended up being about 2700 mAh.