Iron Forge Tools Rolling Storage Rack Caster Wheels Heavy Duty - Set of 4 Locking Caster 3 Inch 1360 lb. Capacity for Boltless Self Locking Shelving Racks, Nylon and Steel Ball Bearing Wheels

Out of all the options I found, this design worked best without knowing if it would work. Thankfully, with some modifications I was able make them fit my Home Depot Husky brand shelves. These are made for some kinds of shelves but also worked great for what I needed. Painted them to match and works great rolling these in and out of the garage.

Great solution to a big heavy storage rack that was very difficult to move, pretty much everything in my shop has to be movable. These were great solution to an ongoing situation I had,I did have to cut the bottom flat plate off but I use some extra grade 8 bolts. Now the whole cabinet rules very easily and it’s nice with the brakes you can lock it in place. This was a great investment!

I might rate these higher, but they didn’t come with the nuts and the bolts they say are included, so I had to find suitable nuts and bolts for myself.

Gave mobility to my shelves. I suggest getting larger washers than what comes with the casters. Also, this particular model has large openings to accommodate the shelving rivets. Definitely a plus.

Loved these rollers they are built tough and roll smooth.Worked on these shelves, the only thing is the washers they sent are just a smidge too small and could pop out the big hole that is used to start the side brackets. But get some bigger washers and you are on your way.I will be buying these again.

These wheels are just what I was looking for to make it easy to move my garage rack without having to unload it first. It would have been great to have bigger washers on the connecting bolts, but with some patience they were connected to the rack and they work.

Certainly Heavy Duty Quality but way too expensive for this 4 set and load ratingVery high quality and design. I did not remove the bearings to examine them, but judging from all the higher quality features I am sure the manufacturer chose higher quality bearings. The swivel and axle bearings sure feel good with smooth rolling and NO flopping around side play.Casters can be attached many ways. The most common way is via a “flat plate” on the top of the caster. Another attachment method is a “stem” at the top of the caster. These casters have a specific application type attachment “corner high wall angle iron connection”.If you have the type of shelves that allow you to just add these “corner high wall angle iron connection” and you have no welding skills then you pay the too high price for that instant bolt on attachment convenience. I think these casters are overpriced compared to what I usually pay for casters. You are paying extra for the “corner high wall angle iron connection” of attachment. Nevertheless, these are indeed high quality casters.I collect discarded metal bed frames from the trash and use that metal to make shelves. The “corner high wall angle iron connection” type of connection on these casters made for very quick attachment welding onto the upright angle iron of the shelves. However, I can weld on the normal type of “flat plate” caster attachment almost as quickly so I would not have “bought” these casters at this too high price of $102.79. I only “bought” these casters because I got them for FREE as a VINE reviewer. It is your money, your time, and your choice. Pay extra money for the rapid attachment convenience of type of “corner high wall angle iron connection” but don’t spend as much of your time.

I had looked into these a little while back and thought they were a great idea. I have a shed with a few shelves and I wanted to store a disassembled bed behind one. These wheels make it possible to do that without having to unload the shelf to get back there.They do not come with instructions but are fairly straightforward to install on your standard "keyhole" style shelf. The only issue I ran into is that the bolt hole lines up with the large part of the keyhole and not the small part so the tiny washers provided were not big enough. Some 1/4" fender washers solved the problem.The wheels roll very well. I only have about 200 lbs on the shelf currently but it rolls with almost no effort. The brakes hold well but the issue is access since they caster. If you roll it straight back you'll have access to the front wheels to lock them.Overall these are a great solution to the one problem with garage shelving. They are a bit on the pricey side but they are cheaper than replacing a perfectly good shelf just to get one with wheels. If they provided washers that worked this would be 5 stars for me.