Standard Hot Shoe Converter

OK, the build quality might not be the best, but it is extremely cheap. What I discovered is that this works on 3 different camera brands and as my strobe came with a cable, I can now trigger it with any camera from one item. The shoe on the top allows a wireless release to be stacked on top, with a cable to the side of the camera... which works with all cameras... I am very happy with this product!

So my set up is Yongnuo RF603 C3 transmitters and the Yongnuo Y560ii or Y560 iii. I wanted to use a flash wirelessly with my Yashica Mat 124G so I ordered a PC Sync Male to Male cable and a Pixel Hot Shoe Converter. The Pixel had 4/5 star rating but did not work for my set up. I brought this today and it worked immediately. I think this would work for pretty much any camera that does not have a PC sync cable. You won't be able to use any other modes between your flash and your camera apart from triggering the flash. My set up is all manual so triggering the flash is all I need, however if you are using digital cameras and want to use ttl/ettl; you will have to look for something else.

had a few problems with thew socket becoming detached though when it worked it worked perfectly though ultimately had to send back i reccomend the version with the locking screw which seemed to have less issues

Fully met my needs. PC sync with no hot shoe flash connection.

Works pefect

Didn’t work on my canon R50

I understand WHY some cameras don't need a PC Sync, so this is necessary for working with older flashes, or adapting gear that shouldn't be compatible with each other, to be compatible

Cheap, but do the job, I carry spares of these as they break very easily, usually the camera connection cable weakens the adapter where it connects and it eventually fails, other than that they work fine

Ce petit adaptateur marche tres bien. La construction est très simple. J’avais un besoin extrêmement spécifique pour le quel j’ai pas trouvé de produit: J’ai un flash Godox Lux Master Retro. Pour le synchroniser en mode automatique sur des appareils argentique il utilise une cellule qui va dans la “hot shoe”. J’ai des appareils argentique ancien qui ne propose de synchro des flash que via une prise “PC sync”. Leur “cold shoe” est en metal. Et donc elle court-circuite un flash en hot shoe. L’adaptateur JCC s’ouvre en retirant deux vis. Il est facile de retirer le contact central et le dessouder. Ceci transform cette adaptateur en “cold shoe + PC => Hot Shoe”. Ce qui règle tout mes problèmes. J’attache une vidéo montrant le fonctionnement sur un telemetrique des années 60! J’e. Rachèterai d’autre à ce prix. Y’a moyen de dépanner toute sorte de connectique de flash avec ce produit tout simple!

Getestet mit Nikon, Panasonic und Sony. Funktioniert bei allen. Preis / Leistung sehr gut. Beiliegendes Kabel passt zum Walimex Newcomer Studioblitz. Für meinen Studioblitz habe ich einen Funkauslöser gekauft, dieser wird mit einer Knopfzelle betrieben. Da ich nicht weiß wie lange die Knopfzelle hält wollte ich auf Kabelgebunden umsteigen. Deshalb habe ich diesen Schuh mit Sync-Anschluss gekauft. Funktioniert wie beschrieben

Fa egregiamente il suo dovere, grazie a questo articolo ho recuperato in vecchio flash a torcia. Inoltre ho la possibilitadi mettere comunque un accessorio sulla macchina, come se non ci fosse nilla. Lo consiglio.

Funciona perfectamente. Encaja bien, justo, y da la sincronización bien.

The centre contact doesn't contact the middle pin of the Sony MIS shoe on my Godox flash. Thus the flash cannot be triggered via PC sync cable. Useless.