Extreme 80x40

These thermal pads are better than the stock blue we all see usually dissapating heat at 6mk that goes for ARTIC pads also THERMAL GRIZZLY PADS are 8mk and are far superior to the stock and ARTIC and the GLID are 12mk they transfer heat like the sun and keep the temps down better than grizzly as I have tried them ALL an can recommend GLID. If you want to look after your desktop /laptop vram chips an like it's a must especially for laptops as when I got mine I had to repaste with thermal grizzly paste at 12.5 mk the best an done the gpu also and cut to size the new pads. Gpu idle was 44c with blue artic with glid idle at 37c max on artic 75c glid 58c. Dont hesitate to BUY NOW get the best bees knees

Bought for PS4, works great.

I used these thermal pads to replace the stock thermal pads on my Asus RTX 2070 MINI - these thermal pads work well and they definitely have reduced VRM and VRAM temperature, however they are expensive and you only get 80x40 in size. I would really like to see a reduction in price or a bigger size you get for the money, 100x100 at a minimum would be nice. I would only recommend buying these (at the current price of £13.90) if you are an enthusiast who is looking for every ounce of performance and reduced temperature. If you are just looking for replacement pads, you may be better served by other and cheaper options.

Bought two packs of these pads to replace the stock material on my Xbox One X as I was replacing the paste on the APU and thought I may as well do the lot. The 2.0mm was what I figured out you needed for the XBox, and from other reviews I gathered I’d need two packs as this is only 8x4cm. Turns out, if you’re not worried about the Southbridge chip on the reverse of the board, you can easily do the 12 RAM chips (about 11x14mm each) and the VRMs with a single sheet of this. As I bought two anyway I used the second pack to do the Southbridge but could have fudged it with the remaining scraps or reused the original pad if I needed to. All the credit can’t just go to this material as I obviously replaced the paste as well, but the XBox fan has dropped about 25dB and is noticeably quieter. Essentially silent in a normal room on high load from demanding games. I totally believe the higher-than-average specs on this material and it was easy to use and a joy to apply (especially compared to the mess Made taking the stock pads off). Aside from the rather hefty price tag I’d say this stuff is perfect, and probably overkill for my application, but well recommended!

After a fair amount of research I came to the conclusion that Gelid is one of the the best, or at least better thermal pad solutions on the market... I wouldn't say it's cheap, but it is fairly priced; it stung a little bit that I needed to get 1 mm, 2 mm and 3 mm pieces to be sure that I would have all the right thicknesses to repad my graphics card, and that of course starts to add up. However that isn't Gelid's fault... Thermally I can't actually definitive answer as to how much it dropped temperatures, because I was actually installing an aftermarket dual water block on my GPU so it wouldn't be a like-for-like comparison... The water blocks did come with thermal pants, however like I say, having already spent a fortune, I wanted to install the best... What I can say is that with the hefty AIB three slot triple fan blower on the card with stock pads and compund, I was getting about 80C degrees on the GPU die, and nearly 90C on the GPU memory... On the dual front and rear EK water blocks with these Gelid thermal pads on the memory, and thermal grizzly kryonaut on the die, both die and memory peak at 62C now. With much lower (and therefore quieter) fan speeds. 👍😁👍

When I placed my order on 1 Oct, 2018, my order included 4 of 1.0 mm×40mm×80mm GELID GP-Extreme thermal pads + 1 of this item. The title of this item is still " Gelid Solutions gp-extreme Combined |2x (12 W/m K |2x Handset – Grey, 40 mm, 0.5 mm, 80 mm) " and I thought it is for 2× of 0.5mm×40mm×80mm thermal pads. The price for 1.0mm thickness GP-Extreme thermal pad was ￡7.84, while this item(0.5mm thickness GP-Extreme thermal pad) costed ￡8,44, which is greater than 1.0mm thickness one. Anybody would be able to think that item with the same cross-sectional area and the greater thickness would cost much more than the thinner one. So I thought the price of ￡8.44 was for 2× 0.5mm×40mm×80mm thermal pads. So I contacted Amazon UK service center today and asked about my situation. The service center personnel told me he would provide immediate replacement order for 1 of missing 0.5mm thickness thermal pad. What a great service from Amazon UK! I'm waiting for my replacement order now. I'm planning to install these thermal pads on my newly purchased MSI laptop of GE73 Raider RGB 8RF, which is equipped with a notoriously 'HOT' 8th generation Intel Mobile CPU i7-8750H. I hope GELID GP-extreme thermal pad could lower the Max temperature of the CPU significantly. I'll update my review after I install these thermal pad onto my laptop and get the temperature change result. It is a little bit bothersome to wait for a replacement order but I think I was happy to purchase these from Amazon UK with such a great service.. ----------------------------------- UPDATE : I contacted Amazon UK's customer service and they had sent the missing item immediately. And it took 5~6 days to arrive. As for performance, I observed significant reduction in the temperature of SSDs in my laptop after applying this product. Highly recommended!

Used on a 3090 active back plate waterblock, vrm temps are excellent

I used this (and a few other thicknesses) to replace the stock thermal pads on an Asus 3090 ROG Strix. I was temperature capped (96 degrees) at 110mh and now I can get up to 125mh while maintaining decent temps (94 degrees). At 110mh my temp is at 82 degrees, great, but that's not what my goal was.

Mehrere Pads wurden für die Front-/Backplate einer 3090 FE verwendet. Aufgrund der weichen Mischung wird der sonst empfindliche Anpressdruck der Kühler auf die GPU DIE nicht beeinflusst. Die GELID Pads werden aus diesem Grund empfohlen. Die maximal zu erwartende Wärmeübertragung wurde erreicht, die Temperaturen sind seit 4 Wochen konstant und die DIE Temperatur sowie Hotspot Delta sind ebenfalls konstant geblieben und gerade letzteres ist oft das KO Kriterium für andere Pads. Einige Reste habe ich für die Außenseite der GPU Backplate verwendet und ich war überrascht wie gut die Pads an der Backplate und an den nur draufgelegten Kühlern haftet - ohne dabei Spuren zu hinterlassen. Durch die hohe Nachfrage hat sich der Preis natürlich geändert, das ist natürlich unglücklich, aber kaum zu ändern.

la version de 1.5mm es la mejor para poner en las 8 memorias Ram y las 6 V-Ram de la GPU en un PS4 PRO, disipan bien el calor y junto con pasta termica de alta calidad son la mejor opcion para solucionar el ruido de turbina de avion de los modelos 7000

perfecta para una 3090 ,baje temperaturas de memoria ram y la calidad de las mejores

Replaced thermal pads on a RTX 3090 and this significantly reduced the temps I was having