N2615CH Tri-Max 3 Flow Rate High Efficiency Showerhead

Muy buen artículo, cumple con mis expectativas

Can a low-flow shower head be as good as a regular shower head? This product proves that it is. I bought the shower head because we live in Las Vegas. Our primary water source comes from Lake Mead. Lake Mead water is at historic lows. We could run out of water sometime in the future. I wanted to find a way to conserve as much water as possible. I also wanted to save a good amount of money on my water bill. I originally found low-flow shower heads when I discovered the Moen Nebia. It seemed magical that it could give you the same shower experience while using less water. I wanted to buy it until I discovered the price. It is $212 for the cheapest one. I found that pretty outrageous that it cost as much as a brand new smartphone just to save water. I discovered this product while browsing on Amazon, it is the same exact concept as the Nebia. It is supposed to save Water by restricting the flow. The price is way cheaper than Nebia. About 13 times cheaper. I Decided to buy this because it is very affordable and also includes the 10-year warranty. I first tried the product today and it is very enjoyable to use. For starters, the design looks unusual to say the least. I like the metallic, chrome look on it is way narrower than other shower heads, but it still looks pretty good. It kind of looks like a tuna cactus fruit in my setup. The design is very subjective, but I don't mind it. The build quality also feels better than decent. It is all plastic, but it does have some heft and doesn't creak or flex when squeezing it, which is good. The best part when it comes to its build quality is that when you turn on the water and turn it off, it doesn't drip water. This is a step up compared to other shower heads. This means it probably a high quality valve or seal mechanism. I have noticed however that it doesn't keep a straight spray and it kind of Wiggles, which is unusual but not a big deal. Using this product is amazing. It uses 0.5-1.5 gallons per minute, which is way less than the average shower head that uses 2.5 gallons of water. Despite that, however, it feels like it's using way more than that. It was able to give me the same experience as my old shower head while using less water. It was the perfect amount of pressure, and the distribution is very even. This just proves that you don't have to sacrifice comfort to save water The pressure is also higher, which is surprising. That can be a good thing depending on your water pressure. If you have a higher than average water pressure than this thing might feel like needles. I have an average water pressure oh, and this thing gives me the perfect amount of pressure. Most of the time, I use the 0.5 – 1.0 setting, since it is adequate for me. The 1.5 setting is a little too much pressure for me. Overall, this is an amazing shower head that's going to save money and water. It is just as comfortable as any other 2.5 GPM shower head, while using less. The building is sturdy enough to last a good amount of time. The design is subjective but doesn't look bad. There are no sacrifices of this water low flow shower head except for the design. Anybody one that cares about saving their water bill and the environment should buy this. It is the same price as other shower heads. I have a good feeling this is going to pay for itself in about a couple weeks.

An Excellent Product That Truly Saves The Amount Of Water Used With Enough Force That Is Rather Surprising. I Can Take Nice Long Hot Showers Without Feeling The Guilt That I Am Indulging In The Waste Of Now A Precious Resource And Commodity. Highly Recommended...

I purchased this shower head and I quickly installed it using Teflon tape and hand tightening. While the shower head worked well, it did leak a bit. I initially thought the use of plastic for the coupling was the culprit. However, I removed the shower head and the Teflon tape to try again. This time, I did it correctly. After I removed the tape to reapply, I used a small wire brush to thoroughly clean the threads before taping with Teflon tape. I was surprised at how much crud came out of the threads, even though it wasn't immediately obvious after removing the old shower head. After retaping the threads, the shower head worked without leaks. I have no issues with the shower head turning at the joint when adjusting the flow. All in all, I think this is a great product for the price. I really like the flow options.... the .5 gal setting works great to keep a warm trickle flow on you while soaping up should you be inclined to take "navy" style showers (totally stopping the water while soaping up). I rarely used the 1.5 gallon setting, the 1 gallon setting it more than enough for me. This shower head is a bargain at the price.

saves water no doubt but my husband dislikes the pressure difference