MagicMount Pro XL Magnetic XL Flush Mount

super strong, works like a champ, took my ipad all over colorado trails flawlessly, others on truck failed, replaced with these

I ordered 2 mounts but only one arrived. I should have sent it back but took a 50% refund instead, ordered another set and got 2 this time. So I have 3, needed 2. I'll put one in the other car for the passenger. I did another review but It's not here. Maybe they deleted it because I got the refund? They include something called a magic plate that goes between the sticky metal plate and your phone to make it easier to remove the plate if you want to. Wife has a Samsung S22 and that magic plate wouldn't stick to it. 3M Blue masking tape wouldn't stick to it either. It must have some kind of coating. The wife didn't want it stuck directly to the phone so it's held in place by the protective case. It seems to work okay. I have a different unit in my car with a metal plate and it stays in place with just the case holding it there. The car mount was easier. I cleaned up 2 areas on the dash of our 1999 Sienna. I cleaned them with a cleaning tissue for glasses, put one on the driver's left above the A/C vent and the other just below the rear window defrost button. It seems pretty strong so we'll see. I'll update here if there's a change. My phone is a Samsung S8. I added a second metal plate to mine but they slide around, so I peeled off the paper from this holder's plate and put it on the back of the phone and it stuck. I put the other one from the different mount below that one and used the 3M Blue masking tape to see if it stays in place. I put the Otterbox case back on. This seems like a good system. It is certainly designed like what I had in mind. The one in my car mounts in the A/C vent. It's good but once mounted you cannot control the vent. I had to set the vent the way that's most convenient then put the vent mount on and there it stays. With this mount it is on the plastic near the vent so it can keep the phone cool on long trips when I'm using it for navigation. It's adjustable in several directions and the vent can also be adjusted. I'm giving these mounts 5 stars for now. Hopefully everything will go well. I like the convenience of the magnetic mount. If all goes well with the adhesives then I'll keep it 5 stars.

This phone holder is of good quality and can be mounted wherever you want. It's smallish, so you should try positioning it before applying the sticky tape. I used the additional sticky pad that's provided to mount the magnetic holder because the dash on my truck isn't perfectly smooth. I have a thick rubber Otter Box case for my phone, which wouldn't be a secure place to tape on the provided steel plate, so I taped it directly to the back of my phone, down low for fit, and put the case back on. This only marginally worked because the magnetism didn't work well through the rubber. So, I ended up cutting an opening through my phone case to fully expose the metal plate. I regularly travel Class -2 to Class-4 backroads up here in Vermont, but my phone no longer falls to the floor like it has in the past; it stays right where I put it.

This is a review of the "Window/Dash Mount" version of the product... For the record, I have a Galaxy S4 and use the "Wollony Rugged Hybrid Dual Layer Hard Shell Armor" case for my phone. Overall, the mount does precisely what I need it to do: Hold my phone securely in a single position with minimal movement while I drive. I use Waze for traffic alerts, so having a phone held in a single position with minimal movement is ideal. My previous mount was a vent mount that "gripped" the phone from the sides... And that was not ideal. The setup for the phone is straight forward. I already had a mount on my dashboard from a Garmin GPS unit, so I just used that for placing the suction mount. Between the sticky surface and the suction, it holds very securely. The swivel head allows for a large degree of movement, so placing the mount in the right position is just a bit of work. Once in place, the mount hasn't moved so much as a centimeter. The metal plate for the phone required a bit of trial and error. Initially, I placed the large plate between my phone and phone case. Unfortunately the thickness of the case interfered with the magnetic attraction to the plate, so my phone would slide during my drive. And a large bump would knock the phone completely off. I decided to place the plate on the exterior of the phone case, and the magnetic attraction worked perfectly. The "grip" between phone, phone case, and mount is ideal for keeping the phone level and in a single position during the entirety of my drive. So, the set-up works perfectly for my purposes. The small plate that attaches to the case is a bit too small for my purposes, since the back of my phone case is not perfectly flat, but the large plate works well. Ideally, the manufacturer could offer metallic "strips" that could adhere to smaller spaces on different cases, but that is a minor issue and is largely cosmetic. I also followed other reviews, and made certain to let the large plate "adhere" to my case for 24 hours to ensure that the adhesive wouldn't fail from use. I do not recommend using either plate directly on your phone, and would recommend using it on the case instead. (Replacement plates are available for minimal cost, should you decide to replace the phone case.) Overall, depending on your specific phone and phone case, this is a good dashboard mount. You may have to experiment a bit with the exact arrangement of the plate versus the phone versus the phone case... But I've yet to experience any significant detriment or problems. (If anything changes in the next month, I'll edit my review accordingly.)

المنتج ممتاز لاصق قوي و مغناطيس قوي انصح به بشدة . التوصيل تاخر قليلا

ok

Ottimo

This is the second time purchasing this item, I use them in my car for satnav. Its a great quality item, feels very durable and is sturdy. Haven't had my phone fall off the mount or any other issues. Would recommend

Uzun zamandır evdeki mevcut iki arabada ve daha önceki araçlarımda da Spigen markasının A200 - SGP11583, Kuel H12 - 000CD20115, Kuel Rugged QS11 - 000CG20879 modellerini tercih ediyordum. Yorumlarına bakarak denemeye karar verdim ancak ne yazık ki telefonu tutan manyetik kısmı bir Spigen değil. O nedenle kesinlikle Spigen öneririm, ne yazık ki Scosche markasının daha gidecek yolu var.