LTP Ironwax (LTP Ironwax Satin - 1 Litre - Surface Sealer for Interior Stone)

This is a good product. I know it's unusual but it actually does what the manufacturer claims. Once you've cleaned and dried the tiled floor just rub the stuff in - it dries quickly and you can immediately see the shine. In my experience, if you apply a second coat the sheen will remain for several months.

Using this to seal a brick fireplace. Does exactly what is says in the description and works well sealing the dust and giving the brick a clean shiny look. 1 litre doesn't go a long way, so make sure you have enough.

This stuff is super. I used it on my kitchen floor which is Chinese slate. It was so dull and drab looking but this has brought a brilliant shine to it. It really looks great. I decided to use a brush rather than a roller so the rough dips in the tiles would not be left with pools of liquid. I gave it two coats although one was fine. Dries in about an hour and the floor looks well sealed. I’ve tried loads of different sealer but they never left a good shine and in a couple of days you wouldn’t know it had been done. I did this a few weeks ago and it hasn’t lost any of its shine and looks like it will last quite a while. Only takes about 20 minutes to apply one coat. I still have half a container left but don’t think I will have to use it in the near future.

Have used this product here and there on my slate kitchen floor. The floor gets a fairly hard life, what with the dog traipsing in and out, six cats loitering around, not to mention 2 kids back and forth. This product is about the best I've found to protect and seal the floor and giving it a decent shine. I preclean the floor beforehand and usually apply about 3 costs over the course of about 2 hours. Being quite porous, the skate quickly absorbs the sealer and is usually dry enough to walk on after this. Once properly hardened, after a few days or so, it is fully waterproof and looks fantastic. I always use this stuff and will continue to do so as long as the floor is down. Excellent stuff!!

I used to sell this years ago and know LTP are a company that makes good products, used it on limestone floor tiles (stone not ceramic) managed four coats on thirty square metres of floor. Two before grouting and two after , it looks stunning. That said we were careful to remove every speck of .... anything and get it bone dry. Prepare it well and you will love the result, buy this!

It does what it says on the tin. I applied it with a paint brush. You don't need a lot so a bottle goes a long way. You need to reapply to get the depth of finish at least 4 times however it will not give you a high gloss wet look finish but more of a satin finish.

Average

Does what it says on the tin (or tub even!)

Perfect