RunCam Spotter V2 FPV Camera and Transmitter Kit, 5.8G Micro AIO Cam, OSD, Integrated Mic, FOV170 Degree 700TVL, 40CH, 20MW-200MW Adjustable

It's a great camera with decent enough video if you're starting out, plus it's really cheap. Other cameras require a separate transmitter for the camera. Just connect to an empty receiver channel and it works and transmits just fine. I recommend getting this plus the sologood monitor because they connect easily and it's a cheap fpv combo to get your feet wet and not break the bank. I'm using it on a turbo timber evolution 1.5m.

I have purchased 9 different camera/transmitters and this is the only one that performed great. the video is sharp and clear tested up to 150 yards and the audio was clean at the same distance . It is also the only one that was easy to mount. I added a small cooling fan to the heat sink as the unit was mounted inside my Flywing UH-1 V4 450 helicopter not in the wind stream. Note: the fan you will need is 15mm square. I loved it so much I ordered 2 more ,one for my P51 and one for my P38 Lightning . I recommend this unit for tight areas like cockpits ,looking through the windshield . RMC

Works well, does exactly what it says. My main gripe is that it will overheat fairly quickly and you will get a severely distorted image if you don't have a constant airflow moving over the heatsink. Definitely should have had a small fan or an optional version with active cooling because it needs it. If you plan to have this inside an RC vehicle like I'm using it for, also plan to get a small fan for it.

This thing can take a beating. I was going about 45 mph with my 1/10 scale RC truck, slammed on the brakes, and forgot that I had adjusted the front shocks to full stiffness on the concrete road. It flipped three or four times, bent the heat sink on the camera, and knocked it off my rigged mount, but it was fine. It still works like new. For a new buyer, I thought the antenna would break easily because it looks fragile, but it can take a beating. I have rolled it more times than I can count, and the antenna just bends right back into place with no problem. I plan to buy more of them in the future. Things are rock solid and very durable.

My first fov cam paired right to the eachine ev800d goggles. works fine, not the best image quality in the world but good enough to fpv forsure. Gets super hot, hot enough to remelt glue after hot gluing it down. keep in air flow and or install some sort of fan if possible. it comes with a extra antenna but the antennas are soddered on. its a very tiny tiny camera and it fits in the cockpit of my eflite p47 very easily

Great camera, very durable and easy to plug up to my RC truck, plane, tank. The servo plug makes moving from one model to another very easy. Like all AIO cameras, this one does get hot. Make sure the heat sink can get a breeze.

Good quality. No issues. Would buy again.

Nice and clear video I love it