Keycap Puller for Mechanical Keyboard Keycap Remover

Its really nice to pull out the key caps without destroying it when picking them out, it is very useful. I highly recommend this keyboard puller if you want to change out your key caps.

I had a squeaky space bar. A quick online search showed that some "Super lube" put in the right place can (and did) fix it. This tool (with prime) was so cheap to not risk messing up with a couple of paperclips. Pros: - the tools works well (hint for space bar, remove the alt keys using the "2 loops" end. Same as 2 paperclips method, just easier. Then use the other "hook" end, and slide it to the middle of the bar, and pull straight. - did I mention the price? Cons: - if I had to do an entire keyboard, I think the tool would last, but it seems fragile enough to not be a tool for a repair shop / IT repair tech. Overall, I recommend that over any paperclips (or worst some screw driver, pliers...), as this will NOT mark or damage your keys.

This does the job. I have an older (circa 2005) Dell mechanical keyboard so only the wired end of this tool was of any use, but it worked well on most keycaps. But due to the width of it, I was not able to removed keycaps that are against the corners. I had to pry those out the old-fashioned way. Still happy with this. I got all the keycaps off so I could give the area below them a good cleaning and al so wash and dry the keycaps. Nice tool at a nice price.

Okay, so, you're probably wondering why this is a few dollars, and why you should bother wasting your money on this. 1. its not wasting your money, if its saving you time and irritability to remove some simple-hard-to-reach key 2. the features of this product is that ability to easily, with one or two hands, remove a key almost effortlessly. 3. You're not gonna find many, if not, better, key cap remover than this one. Tip: I'm right handed, but I found removing keys with my left hand while holding the keyboard with my right, makes for easy removal. Tip: If you want to clean your keyboard, you need something like this. Tip: If you're mechanical keyboard is to loud, or if you're tired of the click-clacks, than you need O Ring Silencers. Trust me, you'll fall in love.

product arrived on time with 0 damage, worked perfectly on my mechanical keyboard

Gets the job done when you need to swap out switches for buttons or keyboards

I used it for a recent keyboard project that I painted and swapped cherry reds to kailh speed coppers. It does the job but I'm a bit worried about the build quality. Specifically the prongs designed to pull out the key switches; it's already uneven and will probably come apart sooner than later. Decent purchase, will hopefully never have to update that the keyswitch puller part broke. But I will (if necessary) just so that future purchasers know what to expect. EDIT Jan 2021: Upgraded from 4/5 to 5/5 because it has held up well this entire time and is even still my preferred keycap AND switch puller over those green ones that have begun to rise in popularity. I bought one of those and they are too thick and struggle pulling out my switches without scratching my switch plate. So, if you're looking for a combo puller this is a great one to have.

The part for pulling keys up is pretty loose and tends to wobble around a bit. Once you pull the keycap up it's actually very easy for it to just fall out if you're not careful (and according to the laws of the universe, a dropped object while you're working on something will bounce ten times, fly ten feet across the floor, and go up under something.) Also, the description kind of made me believe that the keycap puller would stretch all the way across really wide keys like 2.5u or even maybe spacebar keys, however, it does not. For large keys you have to slide across the top and bottom (which usually is harder than the sides if they aren't flat) and pull at one edge of the keycap instead of the whole thing. Those little plastic keycap pullers still work a lot better for larger keys definitely. The switch puller part is pretty good though. I think it could have a bit of a sharper edge to it to slide under a bit more easily, but all in all it works pretty well. I can't imagine there being much better on the market really for switch pulling, but it is a very simple task overall. This will definitely beat out just using pliers or something so I definitely recommend it or one like it for that. Overall I'd say the plastic keycap pullers are probably best for keycaps. I would suggest buying this really mainly just as a switch puller (and it's definitely better than a plastic switch puller) rather than as a keycap puller.

The Ortarco Keycap Puller for Mechanical Keyboard is a top-notch accessory that offers a hassle-free and efficient solution for removing keycaps. Crafted from stainless steel, this keycap remover tool boasts exceptional durability and a sleek black finish, making it an essential addition to any mechanical keyboard owner's toolkit. Pros: 1. Sturdy Stainless Steel Build: The keycap puller is constructed with high-quality stainless steel, ensuring reliable and long-lasting performance for countless keycap removals. 2. Efficient Keycap Removal: The tool's design allows for easy and precise keycap removal, making it ideal for cleaning, customization, or maintenance purposes. 3. Versatile Compatibility: The keycap puller is suitable for use with a wide range of mechanical keyboards, ensuring compatibility with most keycap types and layouts. 4. Comfortable Grip: The ergonomic design of the keycap puller provides a comfortable grip, enhancing user convenience during prolonged use. 5. Sleek and Aesthetically Pleasing: The black finish adds a touch of sophistication, complementing the overall aesthetic of your mechanical keyboard setup. Cons: 1. None Noted: The Ortarco Keycap Puller for Mechanical Keyboard has met all expectations, and there are no reported drawbacks or issues during use. In conclusion, the Ortarco Keycap Puller for Mechanical Keyboard is a must-have tool for mechanical keyboard owners seeking effortless and efficient keycap removal. Its sturdy stainless steel construction ensures durability, while the ergonomic design offers comfort and ease of use. Whether you're cleaning your keyboard, customizing keycaps, or conducting maintenance, this keycap puller provides a reliable and satisfying experience with every use. With no reported drawbacks and exceptional user satisfaction, I confidently rate the Ortarco Keycap Puller with a perfect five stars. For mechanical keyboard enthusiasts, this tool proves to be an invaluable companion in preserving and enhancing the performance of your prized mechanical keyboard. Embrace ease and efficiency with the Ortarco Keycap Puller for Mechanical Keyboard and elevate your keyboard maintenance and customization endeavors!

Product was of a lesser quality than I ordered.

I recently purchased the Ortarco Keycap Puller for Mechanical Keyboards, and I’m thoroughly impressed by its quality and performance. The stainless steel construction gives it a solid, durable feel that far surpasses plastic alternatives. It’s ergonomically designed for comfort and control, making keycap removal incredibly simple and efficient—no slipping or awkward angles. What I especially appreciate is how effortlessly it works across various keyboard layouts. Whether I'm doing a quick swap or a full board cleaning, this tool streamlines the process beautifully. It’s compact enough to store easily, but sturdy enough to handle regular use. Overall, Ortarco has nailed the balance between functionality and build quality. If you're serious about maintaining your mechanical keyboard, this keycap puller is a must-have addition to your toolkit. I recommend buying it.

Works as it should, although I only used the puller side. This is faster and more convenient than pulling out key caps by hand, and much less painful too. However, once it arrived, I realized I just paid $10 for something that should've costed no more than $5. You can tell by looking at it that it takes less than a couple bucks to produce. Look for a better deal if you can.

I wasn't expecting much from this after reading some reviews but after using it in person it has done a great job pulling switches and keycaps from newly purchased NK65 Milkshake. I opted for this instead of a separate keycap puller + switch puller (ie. Ramaworks XO). The metal clamps that are used to pull switches may become bent out of alignment but you can bend them back easily. To pull switches you have to hold it as close to the actual clamp as possible, and it doesn't take much force to pull out switches at all. Overall the product does a great job but the quality is what you pay for. Does the job fine if you take care of it.