Rustproof Corner Shower Caddy Tension Pole for Bathroom Storage

After trying multiple shower storage solutions that didn’t work, this tension corner shower caddy was the answer. Assembly was straightforward, and the directions were clear and explicit — I had it installed quickly without frustration. The caddy feels sturdy, adjusts easily, and fits securely from floor to ceiling. Once installed, it stays firmly in place and holds all of my shower essentials without slipping. The design is clean and modern, and it looks great in the space — much better than adhesive or suction alternatives I’ve tried in the past. Overall, this is a well-designed, functional product that does exactly what it promises. I’m very happy with the purchase and hope it holds up well over time. So far, it’s been excellent. Highly recommend.

Just got done installing this which was mostly painless. You just measure your space, pull out the tubes you need - follow the instruction sheet, clip them together, adjust the top tube and pop it in with the rubber ends. 4 included shelves and some attachments should be enough room for most unless you have a big family. I would like the tubing to be just a little thicker perhaps but I don't think that will affect longevity. Came with a 2 year warranty, only time will tell if it begins to rust. I sent a message to the seller before I had installed this asking about the availability of additional shelves. I ended up not needing any more but the seller was really quick to respond which is great. All in all, would definitely buy again if I needed another one.

It's super-easy to fit the tubes together, adjust the overall length, and then "spring" the pole into your desired shower corner. The pole feels "locked" into place. I mean, this isn't going anywhere. But the best part is the shelf design. Each shelf has a couple of "hooks" that surround the pole. You hold the shelf at an upward angle to position the "hooks" behind the pole and then just pull the shelf downward. The "hooks" cam onto the pole with firm, plastic pads that look like they'll last forever. Once each shelf is "clinging" to the pole, it is rock solid. And you can reposition the each shelf as often as you wish, because you just lift the front edge to "un-cam" the shelf, slide it up or down the pole, and then pull the shelf-front down again to "re-cam" the shelf in place. Again, once it's in place, it is very solid. We have some shelves crammed full of shampoo bottles (the family size), so they are heavy. No problem. And each shelf can be infinitely adjusted, so you get the exact positioning you want to fit your particular stuff. You get four shelves along with some nice accessary hangers, like two razor hangers and a couple of small baskets. Everything secures well to the desired shelves, so you can securely hand a couple of razors, for example. The (I think) powder coating looks like it will indeed protect this unit from rust. I've gone through multiple corner shower units over the past couple of decades, and they always end up throw-away. But this unit is by far the best I've seen, and I fully expect this to be the last such unit I ever buy. Very well designed, sturdy, quite apparently rust-proof, and very adjustable. You can't go wrong with this one, IMO.

Unit arrived on time, assembly was simple and completed within 20 minutes. Quality appears to be serviceable and shelving secure for the purposes intended. Will re-post if unanticipated difficulties appear but unit appears that it will cover the need without further ado. Thank You.

So far we really like it. Fits good in the corner and hold a lot of products.

We placed this "Shower Caddy" floor-to-ceiling in a stall shower with a tile floor and a drywall ceiling. We ordered the caddy in silver (not black), and all the parts are well finished. The finish seems to be polished stainless steel, not a chrome coating. We just installed the unit yesterday, so we don't yet know whether the caddy will show rust when the unit has been wet & dry, but the finish looks like it will stand up. It will depend on the quality of the stainless steel. The pole is composed of segments that are connected by siding the reduced-diameter end of one segment into non-reduced-diameter end of the next. There are 2-inch-diameter plastic "feet", one to abut the floor and the other the ceiling. The majority of the segments (all but the lower 2) are identical, so height can be adjusted in large increments by adding or removing segments during assembly. (Actually, one half-length segment is provided in case needed to achieve the right pole height.) The bottom segment is a tube inside a tube with a twist-to-lock mechanism, so fine adjustments to the height of the pole are made by adjusting how far the inner tube penetrates the outer one and twisting the inner one relative to the outer one to lock the position of the inner tube relative to the outer one. The mechanism that locks the inner tube to the outer one includes a compression spring, so even after the inner tube is locked in place, it can be pushed in & will exert outward force. As stated in the assembly instructions, we adjusted the pole (with the inner spring uncompressed) to be about 1-1/4 inch taller than the vertical span of the installation location, so the spring had to be compressed to install the pole; thus, the spring exerts the force needed to hold the pole tight against floor and ceiling. The overall result is a pole that is securely in place and reasonably stiff (not wobbly). The unit came with 4 wire trays and a few small accessory hooks & hangers (e.g., for a washcloth or small towel) that may be clipped to any of the trays. The trays are well made and hook onto the pole in such a way that they may be hung on the pole after the pole is installed in a tight corner. Ours sits about 2 inches out of the corner, but we think it could be wedged in a bit tighter. I don't have words to describe how the trays are attached, but they hang without any fastener, so they can be placed anywhere on the pole & are not constrained to be attached at particular positions. Part of each the tray's "hook" mechanism, where the mechanism contacts the pole, is rubbery plastic that prevents metal-on-metal abrasion & provides friction to hold the tray in place vertically. The Amazon description seems to say that the hanging mechanism is proprietary. Overall, we are well satisfied with the design. We will see how well the Shower Caddy stands up over time.

Only had it for a week or so but so far it’s been great! Seems very sturdy, doesn’t wobble as I’m getting things in/out of the baskets. Very easy to assemble with instructions based on what height you need it at. Looks great, material seems of good quality. Would definitely recommend. Also really appreciate the extra hook that helps stabilize it

After returning a previously ordered less expensive unit, I bought this shower caddy and was so pleased that I ordered a second one for the other corner of the shower. When assembling the previous unit I had to use tape to keep the pipe elements together, not so with the Seirione which has internal springs that keep the pole together. You need to follow the instructions concerning the correct selection of pipe segments as well as the order in which they should be attached together. TIP: when adjusting the length of the pole place it upside down in the corner of the shower, disengage the lock and let the spring tension rod touch the floor of the rim of the bath tub, then lock it and remove the pole. Use a marker and write a dash where the rod exits the tube. Release the lock and pull out the rod one inch, then lock it again. Flip back the pole with the rod touching the ceiling in the corner and push up on the pole and shove it in the corner at the bottom. Job done! The shelves are easy to install, the only minor problem is that the silicone sleeves can slip out of place while moving the shelf. Make sure they are in place. Since these parts are more delicate and could be damaged or lost in the future, I asked the manufacturer for spares and they provide a kit of silicone parts for $10 so I ordered it.

Happy to review this product! Paid a little more for this caddy compared to others, but well worth it. This does not fall over, the racks have a neat design so they don't fall down, and the end pieces are larger with a rubber base. Does not disappoint!

We've been using this product now for about 3 weeks. Finish seems to be holding up and it was fairly easy to install with no real problems. Instructions were easy to follow. I'm not sure why some were having issues putting it together, but if you're not mechanically inclined perhaps this is a complicated procedure. Loaded the trays with multiple bottles, soaps and such and so far its doing the job and looks nice. For those with issues, perhaps they're not tensioning the rod correctly. I followed the directions to make the rod about 2" (50 mm) longer than the opening I'm squeezing it into. This seemed to be an appropriate amount of tension once compressed as I haven't had any signs of movement despite the weight placed in the baskets.

Comes with adhesive zip ties in case it slides, but in my opinion, it’s sturdy. I had to look up a YouTube video to understand how to expand and shorten it, as the instructions were unclear.

Very easy to install , great material and construction .

Good product, i would recommend