Zigbee 3.0 Irrigation Timer, Smart Water Timer for Irrigation, Sprinkler Timer, Automatic Watering System Hose Timer for Lawn & Garden, APP Control, Compatible with Alexa, Google Home, SWV-BSP

Works great and pairs easily to Hubitat. An easy recommendation. No idea how long it will last but hopefully many years if I bring it in for winter

Had real trouble trying to connect the zigbee bridge and water valve to network. I went into my wifi router settings, disabled 5ghz wifi, back to eWeLink app. Zigbee bridge connected and found the water valve itself, also linked to Alexa very easily. P.S. I then went back into my wifi router settings and enabled 5ghz. So now both 2.4ghz and 5ghz are active (as some devices in the home run on either 2.4 or 5). Valve works great! Brilliant product.

Absolutely rubbish. Leaking water to battery compartment. No WiFi! Must have hub. Lucky I had a smart speaker with Alisa it connected but as soon as I take valve outside it disconnected. Advertising 130m open space and up to 30m if walls are, but could not even connect 8m away with one single brick wall. Returned back

I have 4 of these used to water veggie beds and hedges using drip line, controlled via Home Assistant. Work fine for this but flow is only 200l ph on 3.5bar 25mm pipe. So not good enough to support sprinklers. Having said that, they are relatively cheap, easy to setup, do the job asked and so far seem reliable, but limited in what they can be used for.

Works perfect for my use. Wanted to create a smart irrigation system in home assistant. Easy to setup using zigbee2mqtt. Works just as intended for my automations. Now I dont need to wory about watering my plants. Happy Me Happy Plants.

Picked up in zigbee2mqtt straight away. Decent range on it and kind on batteries. Home assistant works well with it.

We have a pair of these devices linked in with Alexa routine to water the garden in the mornings and evenings, for the majority of the time it works as expected but we have had a few instances now where the device remains in the on position (it happened once overnight and pumped out 4700L of water) and becomes unresponsive on the app, you have to remove the battery and reinsert to get it to respond again, hopefully this can be patched out in the future with a firmware update. If these issues didn’t occur I’d have given it a 5 star - but currently, I feel a standard non smart timer would work more effectively.

This has been great! I’ve tied it into Home Assistant, as I’m terrible at remembering to water my plants. It’s made life so much easier — I can set schedules in the Sonoff app, and I also created an automation in Home Assistant that links to Alexa for voice control. Just note that it only works with a Zigbee network, so if you don’t already have one, you’ll need a compatible Zigbee hub or gateway. A really handy little device that’s made my plant watering completely effortless!

Configuré avec la box domotique Somfy Tahoma Switch comme interrupteur, cela marche parfaitement si pas trop éloigné l'un de l'autre. La compatibilité est limitée puisque uniquement la fonction On/Off est possible. L'état ON ou OFF remonte toujours correctement. Zigbee 3.0 n'autorisant qu'une seule connexion il n'est pas possible d'y accéder via l'application Sonoff comme j'imaginais initialement sans le déconnecter de la Tahoma Switch. Par ailleurs cela demanderait un hub ZigBee supplémentaire, car la Tahoma Switch ne semble pas pouvoir jouer ce rôle. Super rapport qualité prix sachant que les autres programmateurs que j'ai pu voir coûtent 2 ou 3 fois plus cher sans offrir de support de protocole de communication domotique. Le paramètrage des scénarios d'arrosage depuis mon application domotique est hyper pratique. À part ça, aucune fuite observée depuis 5 jours d'utilisation intensive et les piles tiennent la route pour le moment, à voir dans le temps. Relié à un selecteur automatique mécanique d'une marque grand publique bien connue, on se fait un système d'arrosage automatique hyper efficace à moindre coût.

Top

Testuję ten zawór od kilku godzin na ogródku (sparowany z ZB Bridge-P) i całkiem fajnie działa. Np. przy zasilaniu z sieci wodociągowej po ustawieniu limitu na 10L nalewa około 0.5 litra więcej, ale trzeba ograniczyć ciśnienie żeby miał czas na reakcję. Podłączałem go też do pompy studziennej i również dobrze mierzy przepływ. Niestety w schemacie scen Ewelink nie ma w tej chwili możliwości wyzwolenia akcji stanem on/off więc może być kłopotliwe sterowanie pompą, gdy się go w ten sposób zasila. Na razie nie zauważyłem innych mankamentów :)

It’s painful to setup and a headache to operate. This should be as easy as plug and play yet it requires different device as a bridge which is not included and have to buy separately, it says it got wifi but it needs bridge.

I can confirm this device works with Zigbee2mqtt 2.10.1 and Domoticz v2026.1.